Ovijalec nakup rabljenega (170)

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), ECOSPIR EV These are highly robust and largely maintenance-free machines that impress not only with their exterior design but also with their sophisticated and well-engineered technology. Technical data: • Operation via TOUCH SCREEN • Storage of 8 wrapping programs • Turntable diameter: 1650 mm • Continuous load capacity of turntable: 2000 kg • Maximum pallet height: 2200 mm • Connection value: 240 V, 50 Hz, 1 KW • Machine with CE marking Nodpjmt Du Nofx Adyswb Warranty: 24 months (single-shift operation) Optional: Ramp for pallet truck & electric pallet jack (price on request)

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Our mobile wrapper is one of our demonstration machines, in good condition with minor scratches on the housing and chassis. Comes with a 12-month warranty, fully inspected and serviced. Optional accessories such as a wide sensor belt are available upon request. Key advantages at a glance: - Operating area of only 750 mm around the pallet - Extremely compact design - Patented steering system - Up to 40% less space requirement compared to competitors - Very easy to operate - German support - Upgrades available both at purchase and later The LEO requires only 75 cm (about shoulder width) around the pallet to be wrapped. OPERATING AREA Pallet size: Height: min. 500 mm / max. 2,000 mm Length: min. 600 mm / unlimited Width: min. 600 mm / unlimited Machine dimensions: Height: 1,950 mm Length: 980 mm Width: 700 mm Pallet weight: min. 50 kg (optionally lower possible) FILM SPECIFICATIONS Wrapping programs: - Base and top wrapping - Cross and single direction wrapping - With stop function for top sheet placement Max. film width: 500 mm Max. core diameter: 76 mm Max. outer diameter: 220 mm MACHINE DATA Voltage: - Battery: 2x 12 Volt - Charger: 220 Volt integrated - Drive: 2x 24 Volt - Film carriage: 1x 24 Volt Film carriage: - Individual parameters for up and down movement - Mechanical film brake - Infinitely adjustable Control: Nwedpfx Ashfc Risdysb - Touch panel with digital display - Quick selection keys - Tiller with navigation buttons - Pallet detection via sensor belt - Emergency stop switch - 6 programmable work modes - Double collision protection Mast: Stationary design Weight: 195 kg FURTHER DETAILS - Height detection via photocell - All drives via chain - Can wrap black products or use black stretch film (optional) - Acoustic and visual warning signals - Machine with CE marking This machine can wrap black products or use black stretch film (optional). Charging is possible with any cable with an EU plug using a standard 230V household socket. A suitable charging cable is, of course, included in the scope of delivery.

Leto izdelave: 2025, Stanje: novo, ECOSPIR EV These are highly robust and largely maintenance-free machines, which impress not only with their external design but also with their sophisticated and well-thought-out technology. Technical Data: • Operation via TOUCH SCREEN • Storage of 8 wrapping programs • Turntable diameter: 1500 mm • Turntable continuous load: 2000 kg • Maximum pallet height: 2200 mm • Connected load: 240 V, 50 Hz, 1 KW Nsdpfx Ajhfdc Rjdyewb • Machine with CE marking Warranty: 24 months (single-shift operation)

Stanje: pripravljen za uporabo (rabljen), Premer vrtljive mize: 1500 mm, največja višina palete: 2400 mm, največja teža palete: 2000 kg, hitrost vrtenja: 8 obr./min, prednapenjanje folijskega vozička: 200%. Mere stroja X/Y/Z: pribl. 1800mm/1800mm/2650mm, teža: pribl. 1200kg. Ogled na lokaciji je možen. Nwjdpjxrf I Iefx Adyob

Leto izdelave: 2025, Stanje: rabljeno, Packaging machines, consisting of: 1x Rotary arm wrapper with top sheet applicator, type: B200E, manufacturer: TechnoWrapp 1x Ring wrapper, type: A800-4, manufacturer: TechnoWrapp 1x Rotary arm wrapper, type: CW 400E, manufacturer: CombiPack 1x Baler, type: BVP-950-HL1, manufacturer: Willems, Indion Nedpfjwk Dv Dex Adyewb Technical details, equipment, photos & operating hours as per attached description

Leto izdelave: 2019, Stanje: zelo dobro (rabljeno), Horizontalni ovijalni stroj ROBOPAC Compacta 9 Specifikacija: • stanje – rabljeno, po servisu • proizvajalec – ROBOPAC • model – Compacta 9 • premer obroča – 960 mm • hitrost vrtenja – 75 obr./min • dimenzije stretch folije – 125 x 200 mm, tulec 76 mm • valjčne mize dimenzij 70 x 54 cm • potenciometer za uravnavanje hitrosti obroča • stikalo za nastavitev števila obratov po spustu nožnega pedala • gumb za pozicioniranje izdajne glave folije • gumb za izmet folijskega prijemala • napajanje 230 V (enofazno) Njdjxuvrvopfx Adyswb • teža – 410 kg • leto izdelave – 2019 • dokumentacija za stroj v italijanskem jeziku • skupne mere 190 x 133 x 190 cm (d x š x v) Dodatne informacije: • zelo dobro, originalno tehnično in vizualno stanje • priložene fotografije prikazujejo dejansko stanje predmeta prodaje • možnost zagona in preverjanja stroja na lokaciji

Leto izdelave: 2016, Stanje: pripravljen za uporabo (rabljen), Vertical, semi-automatic pallet stretch or net wrapping machine. The wrapping cycle runs automatically based on preset parameters. Smooth start and stop of the pallet. Top-class safety standards. Control panel with display and rotary mode selector. Pre-stretch with manual tension adjustment. Control panel features: - Patented rotary selector for selecting machine operating modes - Wrapping program: up and down the pallet, or up only, or down only - Adjustable number of wraps at the top and bottom of the pallet - Adjustable carriage movement up/down – manual control Nwedov Drlhspfx Adysb The machine is CE certified. Automatic mode does not function.

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), številka stroja/vozila: S23SFERA05, Mobile Stretch Wrapper ATLANTA SFERA Easy TECHNICAL DETAILS: - Two maintenance-free AGM batteries 12 V – 100 Ah connected in series - 160 pallets per charge – charging time: 8–10 hours - High-frequency battery charger with LED display - Wrapping height “machine with mast (pallet included): 2,150 mm - Height detection via photoelectric sensor or manual input on the display - Safety bar for emergency stop of drive system - Emergency stop switch in accordance with CE regulations - Acoustic warning signal and warning light on machine start-up - Fall protection for the film carriage - Push buttons for Start & Stop - Machine function per CE regulations Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: - All operating parameters adjustable via display - F00 – Display lock for program change - F02 – Adjustable machine speed around the pallet up to 80 m/min - Carriage speed up/down independently adjustable - F03 – Carriage speed upwards from 1.3 to 5.4 m/min - F04 – Carriage speed downwards from 1.3 to 5.4 m/min - F05 – Number of wraps at pallet base (1–10 wraps) - F06 – Number of wraps at pallet top (1–10 wraps) - F09 – Pallet wrap height setting - F13–F16 – Film application tension for foot & head wrapping / upward & downward travel adjustable independently - F17–F20 – Film pre-stretch for foot & head wrapping / upward & downward travel adjustable independently - F62 – Ergonomic height for film change - Display of film consumption (option for PRS – PS) Nwjdpfx Adjv Iqw Dsyjb ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: - 6 storable wrapping programs for SFERA EASY - F01-1 – Cross wrapping (upwards/downwards) - F01-2 – Simple wrapping (upwards or downwards only) - F10–F11 – Wrapping cycle with predefined start and stop height - F12 – Wrapping to a stored height (with deactivation of photoelectric sensor for height) - F21 – Wrapping cycle for large pallets - F22 / F23 – Wrapping cycle for top sheet - F29 – Softstart cycle for application of edge protection - F30–F31 – Wrapping cycle with reinforcement and adjustable wrap count - Softstart to reduce film tears on sharp pallet edges - Wrapping cycle with manual or motorized rope forming (optional) FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE - Brake manually adjustable from the carriage using tension roller - Film specifications: Max. outer diameter Ø 250 mm – core Ø76 mm – height = 500 mm - Option: Stretch film with core Ø50 mm or coreless stretch film - Standard connection values: 230 V – 1L+N+PE – 50 Hz Available options: - Wrapping height up to 3,500 mm - FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” 200% - FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM CARRIAGE TYPE “PS” (POWER STRETCH) 120–400% - Automatic rope forming for wrap reinforcement - Automatic cutting system to produce 3 strips for “BANDEROLL WRAPS” - Cold-store version for operating temperatures down to -5° C - BATTERIES: LITHIUM RELION 2 x 12V Additional units available from stock in Ludwigsburg. Image may differ from actual product.

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control Nsdpfx Aswtc Abjdyjwb

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25NEOS05, Mobile Stretch Wrapper NEOS TECHNICAL DETAILS: HMI touch panel 7" Two maintenance-free AGM batteries 12 V – 120 Ah, connected in series Standard charger: 230 V - 1L+N+PE - 50 Hz Autonomy: 200 - 300 pallets per charge High-frequency battery charger with LED display Wrapping height (including pallet): 2,150 mm Height detection via photoelectric sensor or manual input at the display Protective bar for emergency stop of drive system Emergency stop switch in accordance with CE regulations Audible warning signal and warning light at machine start Fall protection for film carriage Push button for start & stop function according to CE standards, Ø 22 mm ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: F01 - 01 - Cross wrapping (upwards/downwards) F01 - 02 - Simple wrapping (upwards or downwards only) F01 - 03 - Full wrapping cycle with bottom wraps at the same start height F01 - 04 - Quick cycle (with limited or no film overlap) F01 - 05 - Layer cycle F01 - 06 - Economy wrapping program Soft start cycle for application of edge protectors Nodpfsv Iqxuox Adyjwb Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) ADJUSTABLE PARAMETERS VIA CONTROL PANEL: 99 programmable wrapping cycles All function parameters adjustable via display F00 - Display lock for program modification Adjustable machine travel speed around the pallet up to 90 m/min Carriage speed up and down adjustable independently Carriage up speed: 1.3 to 5.4 m/min Carriage down speed: 1.3 to 5.4 m/min Number of bottom wraps (1 – 10 wraps) Number of top wraps (1 – 10 wraps) Adjustment for pallet wrapping height Film tension for bottom & top wrap / ascent & descent independently adjustable Film pre-stretch for bottom & top wrap / ascent & descent independently adjustable Ergonomic height for film replacement Film consumption display (option for PRS – PS) FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE: Brake tension manually adjustable by tension roller directly on carriage Film specification: Max. outer diameter Ø 250 mm – core Ø76 mm – height = 500 mm Optional: stretch film with core Ø50 mm or coreless stretch film Standard connection: 230 V - 1L+N+PE - 50 Hz Options available: -Wrapping height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% -FILM CARRIAGE TYPE “PS” (POWER STRETCH) 120-400% -PATENTED "ARYA" SYSTEM FOR PRS / PS - ARYA system for automatic film blowing and cutting, incl. infrared remote control -Manual roping device on film carriage for reinforcement -Automatic cutting unit (FE, PRS & PS) -Version for operation down to -5° C (only available without HMI touch panel) Other machines available immediately from Ludwigsburg stock Image for reference only.

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), številka stroja/vozila: S25SFERA06, Mobile Stretch Wrapper ATLANTA SFERA Easy *Leasing available // from €180.51/month with 48-month term and €0 down payment TECHNICAL DETAILS: - Two maintenance-free AGM batteries, 12 V – 100 Ah, connected in series - 160 pallets per charge – Charging time: 8-10 hours - High-frequency battery charger with LED display - Wrapping height (machine with mast, pallet included): 2,000 mm (optionally up to 2,400 mm) - Height detection via photoelectric sensor or manual input on the display - Safety bar for emergency stop of drive unit - Emergency stop button according to CE regulations - Audible warning signal and warning light when machine starts - Fall protection for film carriage - Pushbuttons for Start & Stop - Machine function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: - All functional parameters adjustable via display - F00 - Display lock for program changes - F02 - Adjustable machine speed around the pallet up to 80 m/min - Carriage speed adjustable independently upwards and downwards - F03 - Carriage speed upwards: 1.3 to 5.4 m/min - F04 - Carriage speed downwards: 1.3 to 5.4 m/min - F05 - Number of wraps at pallet foot (1 - 10 wraps) - F06 - Number of wraps at pallet top (1 - 10 wraps) - F09 - Adjustment of pallet wrapping height - F13 - F16 - Film tension for bottom & top wraps / ascent & descent adjustable separately - F17 - F20 - Pre-stretch for bottom & top wraps / ascent & descent adjustable separately - F62 - Ergonomic height for film change - Film consumption display (option for PRS – PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: - 6 storable wrapping programs for SFERA EASY - F01-1 - Cross wrapping (upwards/downwards) - F01-2 - Simple wrapping (only upwards or only downwards) - F10 - F11 - Wrapping cycle with predefined start and stop heights - F12 - Wrapping to a preset height (disabling photoelectric height sensor) - F21 - Wrapping cycle for pallets with large dimensions - F22 / F23 - Wrapping cycle for top sheet film - F29 - Soft-start cycle for applying edge protection - F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps - Soft-start to reduce film tearing on sharp pallet edges Nwedjv Iqzcopfx Adyjb - Wrapping cycle with manual or motorized rope-forming (optional) FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE - Tension adjustable manually from the carriage via tension roller - Film specification: Max. outer diameter Ø 250 mm, core Ø 76 mm, height = 500 mm - Optional: Stretch film with core Ø 50 mm or coreless stretch film - Standard connection values: 230 V - 1L+N+PE - 50 Hz Options available: - Wrapping height up to 2,400 mm - FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% - FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM CARRIAGE TYPE “PS” (POWER STRETCH) 120-400% - Automatic rope forming for wrap reinforcement - Automatic system for cutting film into 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C - LITHIUM RELION BATTERIES 2 x 12V - Automatic cutting unit (FE, PRS & PS) Other units available ex stock Ludwigsburg. Image similar.

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: S25Lybra04, Exhibition unit - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2,200 mm Max. pallet size: 1,200 x 1,200 mm Rotating arm with high-resistance ball bearing Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed, upward/downward adjustable Acoustic signal at wrap start and cycle end Emergency stop switch according to CE regulations Positioning aid for correct pallet placement included Safety bumper for collision protection Pushbuttons for machine power-on and start & stop function as per CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F02 - Steplessly adjustable turntable speed 5–12 rpm Carriage speed upwards & downwards can be set independently F03 - Carriage upward speed from 1.3 up to 5.4 m/min F04 - Carriage downward speed from 1.3 up to 5.4 m/min F05 - Number of wraps at pallet base (1-10 wraps) F06 - Number of wraps at pallet top (1-10 wraps) F09 - Photocell wrap height delay F62 - Ergonomically settable height for film change ADJUSTABLE WRAPPING PROGRAMS AT CONTROL PANEL Nedpfjwtc Ahox Adyewb 3 programmable wrapping programs F01-1 - Cross wrapping (upwards/downwards) F01-2 - Single wrap (only upwards or only downwards) F01-3 - Pushbutton for manual functions F12 - Wrap to a preset height (with photoelectric sensor deactivated for height) F22/F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for applying edge protection Soft start cycle reduces film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE Electromagnetically braked roller Film specification: Max. external diameter Ø 250 mm – Core Ø76 mm – Height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW/6A – 1.75 kW/8.5A (with PRS/PS) Manual rope-forming device available as an option. Several more systems available from stock in Ludwigsburg for immediate delivery.

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiWaage02, Exhibition machine, like new. Nwjdpfx Aewtc Dlodyeb SYNTHESI with integrated scale Pallet weighing system integrated into the machine FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height 500 mm – core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Options available: Ramp OPRS film carriage with PreStretch 200% Turntable 1650 mm Wrapping height up to 3500 mm TECHNICAL DETAILS: Turntable 1500 mm (optionally 1650 mm) Wrapping height (including pallet) 2,200 mm Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and cycle end Emergency stop switch, CE compliant Turntable always stops at the same home position Fall protection for film carriage Pushbutton for machine power on, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON OPERATOR PANEL All functional parameters adjustable via display F00 – Display lock for program change F02 – Steplessly adjustable turntable speed 5–12 rpm Carriage speed for up and down independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor wrapping height delay F13–F16 – Film tension for bottom/top wraps & ascent/descent independently adjustable F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE OPERATOR PANEL 6 storable wrapping programs F01-1 – Cross wrapping (up/down) F01-2 – Simple wrapping (up only or down only) F01-3 – Pushbutton for manual functions F10–F11 – Wrapping cycle with predefined start and stop height F12 – Wrapping to a stored height (with photo sensor deactivated) F22/F23 – Wrapping cycle for top sheet F29 – Soft start cycle for edge protection application F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via pushbutton Further machines available from stock in Ludwigsburg.

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25EVA01, Stretch Wrapper EVA *Leasing – Term 48 months with no down payment TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet dimension: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up/down Acoustic signal at wrapping start and cycle end Emergency stop switch according to CE regulations Turntable always stops at the same home position Fall protection for film carriage Push buttons for machine power, start & stop functions to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All operational parameters adjustable via display F02 – Continuously adjustable turntable speed: 5–12 rpm Carriage speed up and down adjustable independently F03 – Carriage upward speed: 1.3 to 5.4 m/min F04 – Carriage downward speed: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Set pallet wrap height F62 – Ergonomic height for film replacement ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL Njdpov Iqx Ujfx Adyswb 1 storable wrapping program F01-1 – Cross wrapping (upwards/downwards) F01-2 – Single wrapping (only upwards or downwards) F01-3 – Manual wrapping F12 – Wrapping to a preset height (with deactivation of photoelectric sensor) F29 – Soft start cycle for application of edge protection Soft start to minimize film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on film carriage Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Options: Turntable 1650 mm Ramp Mounting frame Photoelectric sensor for black products Further units available ex-stock Ludwigsburg.

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), številka stroja/vozila: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Signal tone at wrapping start and at end of cycle Emergency stop switch according to CE standards Turntable always stops at the same home position Fall protection for the film carriage Push buttons for machine power-on, as well as start & stop function & reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Steplessly adjustable turntable speed 5–12 rpm Carriage speeds for upward and downward movement can be set independently F03 – Upward carriage speed from 1.3 to 5.4 m/min F04 – Downward carriage speed from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Delay time for photo cell wrap height F13–F16 – Film tension for base & top wraps / ascent & descent can be set independently F62 – Ergonomic height for film replacement Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrapping (up/down) F01-2 – Simple wrapping (only up or down) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop height F12 – Wrapping to a preset height (disables height photo sensor) F22/F23 – Wrapping cycle for cover sheet film F29 – Soft-start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to minimize film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE “OPRS” Motor-driven pre-stretch system 200%. Optionally with easily interchangeable gear set for 150%–200%–250% stretch Film specifications: Max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Nwsdpjv Iqyrsfx Adyob Total power: 1.2 kW / 6A Optional: FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Pre-stretch set to 200% Turntable size up to Ø 2,600 mm Mast height up to 3,900 mm Ramp Mounting frame Photoelectric sensor for dark products Cutting device etc. Additional systems available from stock in Ludwigsburg. Images may show chargeable options.

Leto izdelave: 2022, obratovalne ure: 2 h, Stanje: kot nova (razstavni stroj), številka stroja/vozila: S22EVA_03, Exhibition machine – like new. EVA Turntable / base frame raised / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm Base frame raised by 150mm–200mm, adjustable for loading with electric pallet truck Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up and down Acoustic signal at cycle start and at cycle end Emergency stop switch in accordance with CE regulations Turntable always stops in the same start position Fall protection for the film carriage Push buttons for machine power-on and start & stop functions, compliant with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F02 – Continuously adjustable turntable speed 5–12 rpm Carriage speed independently adjustable up and down F03 – Carriage speed up: 1.3–5.4 m/min F04 – Carriage speed down: 1.3–5.4 m/min F05 – Number of wraps at pallet base (1–10 revolutions) F06 – Number of wraps at pallet top (1–10 revolutions) Njdpfx Aewtc Ansdyjwb F09 – Setting of pallet wrapping height F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrapping (upwards/downwards) F01 – 2 – Simple wrapping (either upwards or downwards) F01 – 3 – Manual wrapping F12 – Wrapping to a stored height (photoelectric sensor deactivated) F29 – Soft-start cycle for application of edge protection Soft-start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage Film specification: Maximum outside diameter Ø 250 mm – Core Ø 76 mm – Height = 500 mm Standard power requirements: 230 V – 1N+PE – 50 HZ Total output: 1.2 kW / 6 A Other systems available immediately from stock.

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), številka stroja/vozila: S23Synthesi01,

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Nwsdpfx Aewtc Epsdysb Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2022, obratovalne ure: 50 h, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S22SFERABurgerKing, Stretch Wrapper ATLANTA SFERA Easy Nwsdpfxjrqgive Adyjb 6 individually programmable wrapping cycles Maximum wrapping height: 2,150 mm Mast height: 2,050 mm (fits through almost any doorway) Film power stretch: 120-400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via operator panel from 120 to 400% Film application tension electronically controlled by central control unit Quick-load IEF system for easy film roll replacement Film specification: Max. external diameter Ø300 mm – height = 500 mm – core Ø76 mm Film tension can be stored in 4 steps Geomagnetic compass (GMK): always stops at the position from which it started Manual rope formation at the film carriage to reinforce the wrapping pattern TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah (in series) Up to 160 pallets per battery charge – charging time: 8-10 hours High-frequency battery charger with LED indicator Wrapping height "Machine with mast (pallet inclusive)": 2,150 mm Height detection by light sensor or manual entry on the display Protective bar for emergency stop of drive unit Emergency stop switch according to CE regulations Audible warning signal and warning light when machine starts Fall protection for the film carriage Push button for Start & Stop Machine operation compliant with CE standards, connection diameter Ø22 mm ADJUSTABLE PARAMETERS VIA OPERATOR PANEL: All functional parameters adjustable via display F00 - Display lock for program changes F02 - Adjustable machine speed around the pallet, up to 80 m/min Carriage lifting speed up and down can be set independently F03 - Carriage lift speed upward: 1.3 to 5.4 m/min F04 - Carriage lift speed downward: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1-10 wraps) F06 - Number of wraps at pallet top (1-10 wraps) F09 - Set wrapping height F13 - F16 - Film tension at base & head wrapping / up & down independently adjustable F17 - F20 - Film pre-stretch at base & head wrapping / up & down independently adjustable F62 - Ergonomic height for film change Film consumption display (option for PRS – PS) ADJUSTABLE WRAPPING PROGRAMS VIA OPERATOR PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - Cross wrapping (up/down) F01 - 2 - Simple wrapping (only up or only down) F10 - F11 - Wrapping cycle with predefined start and stop heights F12 - Wrapping to a set height (bypassing height sensor) F21 - Wrapping cycle for large-dimension pallets F22 / F23 - Wrapping cycle for cover sheet film F29 - Soft start cycle for edge protection placement F30 - F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motor-driven rope formation (optional) Additional units in stock in Ludwigsburg. Was used as a customer replacement unit. Excellent condition. Immediately available. Inspection possible in Ludwigsburg by appointment.

Leto izdelave: 2024, obratovalne ure: 1 h, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SFERA21Kommission1, Stretch wrapper ATLANTA SFERA Easy 6 individually programmable programs Wrapping height: 2200 mm Mast height: 2050 mm (fits through almost any door) FE electromagnetic film brake Film tension electronically controlled via control unit Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76mm GMK (compass): Start and end points of wrapping always identical Film tension can be stored in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries, 12 V – 100 Ah, connected in series 160 pallets per charge – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height (machine with mast, incl. pallet): 2,150 mm Height detection via photoelectric sensor or by measurement input on display Protective bar for emergency stop on drive unit Emergency stop switch in accordance with CE regulations Acoustic warning and flashing light at machine startup Fall protection for film carriage Push-button for start & stop Machine operation complies with CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE CONTROL PANEL: All function parameters adjustable via display F00 - Display lock for program modification F02 - Adjustable machine speed around the pallet up to 80 m/min Carriage ascent and descent speeds adjustable independently F03 - Carriage ascent speed from 1.3 to 5.4 m/min F04 - Carriage descent speed from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1-10 wraps) F06 - Number of wraps at pallet top (1-10 wraps) F09 - Setting of pallet wrapping height F13 - F16 - Film tension for base/top wraps and ascent/descent independently adjustable F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS AT CONTROL PANEL: 6 programmable wrap cycles for SFERA EASY F01-1 - Cross wrapping (up/down) F01-2 - Simple wrapping (up or down only) F10 - F11 - Wrapping cycle with specified start and stop height F12 - Wrapping to a preset height (disabling the height photoelectric sensor) F21 - Wrapping cycle for large dimension pallets F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for corner protection application F30 - F31 - Reinforced wrapping cycle with adjustable number of wraps Soft start function to reduce film tears on sharp pallet corners Wrapping cycle with manual or motor-driven rope forming (optional) Optional photo sensor for dark goods *Leasing: Term 48 months // 0 down payment Unit was in operation as a replacement device at a customer for 3 months. Has a few scratches – also on the housing – see pictures. Nsdpfx Aewtc Azedyswb Unit is in excellent condition. We are happy to send you further images. Unit can be inspected in Ludwigsburg by appointment. Available immediately. Price ex stock Ludwigsburg.

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), številka stroja/vozila: S25MARATHON01, Semi-automatic manual film wrapper MARATHON TECHNICAL DETAILS The only "PATENTED" non-electrically powered mobile stretch wrapper worldwide capable of wrapping pallets with LLDPE stretch film. The machine wraps loads of any shape, weight, and size. It is recommended to use pre-stretched film with a roll diameter of max. Ø 230 mm. Minimum load dimensions: 650 x 400 mm. Minimum load weight: 50 kg. Wrapping height (including pallet): 2000 mm. Easy operation without reliance on a motor. Manual movement by the operator. The film carriage is moved up and down manually. Nwjdpfxowtc A Ue Adyeb The machine features simplified functions. Replaces manual hand wrapping. MANUAL WRAPPING OPTIONS The operator functions as the motor; number of wraps up and down is freely selectable. FILM CARRIAGE TYPE "FM" WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage. Film specification: Max. outer diameter Ø 230 mm - core Ø76 mm - height = 500 mm. Optional: Stretch film with core Ø50 mm or coreless. Additional machines available from stock in Ludwigsburg.

Leto izdelave: 2025, obratovalne ure: 1 h, Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS04, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film application and cutting. 99 individually programmable programs Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any doorway) Film power stretch: 120-400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable from 120 to 400% via control panel Film application tension electronically controlled by control unit Quick-load IEF system for easy film roll change Film specification: max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah, connected in series At least 160 pallets per charge – charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height "machine with mast (pallet included): 2,150 mm Height detection by light sensor or by manual input via display Protective bar for emergency stop of drive unit Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light when machine is started Fall protection for the film carriage Pushbutton for start & stop Nedowtc Drjpfx Adyowb Machine operation compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Carriage speed independently adjustable upwards and downwards - Carriage speed upwards: 1.3 to 5.4 m/min - Carriage speed downwards: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Setting of pallet wrapping height - Film application tension for base & top wrap / ascent & descent independently adjustable - Film pre-stretch for base & top wrap / ascent & descent independently adjustable - Ergonomic height for film roll change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (upwards/downwards) - Simple wrapping (only upwards or only downwards) - Wrapping cycle with defined start and stop height - Wrapping to a saved height (switching off light sensor for height) - Wrapping cycle for large-sized pallets - Wrapping cycle for top sheet film - Soft start cycle for application of edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film breakage on sharp pallet edges Wrapping cycle with manual or motor-driven rope formation (optional) Other units available from stock in Ludwigsburg for immediate delivery

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, I am selling the vertical film wrapping machine (wrapper) Manufacturer: Pragometal, Czech Republic Model: WMS 15 OPTIMUM LGA Nedpfx Aowyqzfsdyewb Year of manufacture: 2011 Working size: Euro pallets. Assembled, ready for operation. Available immediately, in stock.

Stanje: rabljeno, številka stroja/vozila: 7173, Platform diameter: 1500 mm Wrapping height approx.: 1800 mm Roll core length: 400 mm Drive motor: 380 V Nodpfscg Rn Uox Adyjwb Required space: 2400 x 1500 x 2100 mm

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), številka stroja/vozila: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope forming attached to the frame for pallet reinforcement TECHNICAL DETAILS: Low-profile turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, up and down Audible signal at cycle start and stop Emergency stop button in accordance with CE regulations Turntable always stops at same home position Carriage anti-fall safety device Push buttons for machine on/off, start/stop & reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F00 - Display/program change lock F02 - Infinitely adjustable turntable speed, 5–12 rpm Carriage speed up and down adjustable independently F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10) F06 - Number of wraps at pallet top (1–10) F09 - Delay on photocell for wrapping height F13–F16 - Film tension (base/top wraps and up/downwards) independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS 6 storable wrapping programs F01-1 - Cross wrapping (up/down) F01-2 - Simple wrap (up only or down only) Njdev Iqucjpfx Adyswb F01-3 - Push button for manual functions F10/F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to preset height (with photocell deactivated) F22/F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application F30/F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set at 200% Film tension electronically controlled through control unit Film specification: max. outer diameter Ø250 mm, height = 500 mm, core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratios of 150% / 250% / 300% available Further units available from stock in Ludwigsburg.