Stroj za navijanje

Boehl SENIOR / S-2400 VA

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N - 5 kW Motor with machine stand, Tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade arbor hole: 50 mm Saw blade speed: 2,800 rpm 400 V / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to approx. 25° for acute angles on one side, and tilted flat to the left up to 30°. TCT circular saw blade 520 x 4.0/2.8 x 50 mm 60 WZ, negative rake, for wood RLH-ST60 measuring stop and roller conveyor, 6.0 m measuring length, mounting side: left Heavy-duty design, length stop carriage adjustable from operator side via handwheel, electronic digital display, stop carriage pneumatically clamping, flip-away stop flap towards the rear, with steel rollers, 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 4 support feet and adapter piece, total length: 6.7 m Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60 infeed roller conveyor, 4.0 m long, mounting side: right Heavy-duty design, steel rollers 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 3 support feet and adapter piece Location: Ex stock, 54634 Bitburg Nwodjk H Ic Uepfx Ag Tec - Immediately available - Image: similar. Machine is still in original packaging.

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material Nwodpofg E Hlofx Ag Tec 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: rabljeno, Leto izdelave: 2009, Max. workpiece length: 4,500 mm Milling spindle: 1 unit Main motor: 20 kW Control: Siemens Model: Weinig Conturex 2 C 114 ----- Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamp tables, 2 x 2,280 mm ----- Workpiece length: 200–4,500 mm Processing of workpieces exceeding 2,700 mm in length is carried out using a repositioning cycle. Main spindle 1: ----- Motor with brake: 20 kW HSK 63F Speed electronically adjustable: 2,000–18,000 rpm Max. tool length from HSK 63F reference surface: 290 mm With C-axis Tool magazine: ----- Number of positions: 30 Slot spacing: 100 mm Fixed multi-spindle drilling head ----- For horizontal and vertical drilling and milling operations without tool change ----- Price ex-location Prices for Dismantling and loading onto customer’s truck Transport within Germany and abroad as well as reassembly commissioning and, if required, new profiles available on request! Including used tools (drawings available on request!): ----- Wood: IV 68, 78, 88 in- and outward opening, with fitted weather bar Nedpfx Ajwunwyeg Tswc Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift-and-slide doors IV 68 and 78 Front doors IV 68 and 78 Pivot windows Corner joints: mortise/tenon & dowel Technical data as per manufacturer – no guarantee! Detailed technical description available on request!

Stanje: novo, Leto izdelave: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Njdpfx Agjizkhvj Towc Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60° - 90° - 30° Swivel adjustment with hand crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Extraction port: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Leto izdelave: 2003, Stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Nsdpoiyyf Isfx Ag Towc Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Nedpfxeh Ayyqs Ag Tewc Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Complete line: 11.5 m Technical information subject to correction.

Leto izdelave: 2025, Stanje: novo, Nova mobilna nakladalna rampa FERBERG proizvajalca Mobilna rampa FERBERG proizvajalca se uporablja v skladiščih za nakladanje in razkladanje kontejnerjev ter vozil z viličarji, vozički ipd. Mobilna nakladalna rampa je most med nivojem tal in tovornim prometom. Omogoča neposreden dostop nakladalcu do karoserije vozila. Garancija 18 mesecev. Imeti standard CE. Dostava po vsej državi. Fleksibilen sistem popustov. Specifikacije: - Obremenitev nakladalne rampe – 8000, 12000, 16000 kg; - Skupna dolžina – 9400, 11900, 13400 mm; Nwedpfxsqxrhce Ag Tsc - Širina voznega dela – 2000, 2500 mm; - Delovna višina – 900-1750 mm; - Površina – pocinkana protizdrsna rešetka; - Nastavitev višine – s hidravlično črpalko; - Za premik nakladalne rampe se uporabi priključna naprava; - Barva – siva. Kompletni set: - Mobilna rampa – 1 kos; - Ročna črpalka (proizvedeno v Italiji) – 1 kos; - Priključna naprava za transport rampe z viličarjem – 1 kos; - Kolesa celovita – 2 kosa; - Gumijaste kolesne zagozde – 2 kosa; - Verige s karabinskimi kavlji – 2 kos. Dodatne možnosti: SL – Nastavljive podporne nogev HR – Dodatna ograja TC – Nadstrešek nad rampe vozišče; CLR – Izbira drugačne barve EHP – Elektrohydraulická stanica (220V) s kontrolnim tablom EHBP – Elektrohydraulická stanica (12V) z akumulatorjem Več na naši spletni strani. Prikazane fotografije so zgolj ilustrativne narave. Za podrobne informacije o prodaji se obrnite na proizvajalca.

Stanje: zelo dobro (rabljeno), Kataloška številka 6726 TEHNIČNI PODATKI - Vhod lijaka za polnjenje: 280x300mm - Izhod za zdrobljen les: premer 310mm - Delovna širina rotorja: 340mm - Glavni motor: 22kW - Število nožev: 6 kosov - Dimenzije (d/š/v): 1300x1150x1680mm - Teža: 720kg Nwjdpfsignt Usx Ag Tec PREDNOSTI – Zelo dobro stanje – Rabljen sekalnik Neto cena: 19.900 PLN Neto cena: 4.740 EUR Neto cena izračunana po tečaju 4,2 PLN/EUR (pri večjih valutnih nihanjih se cena lahko spremeni)

Leto izdelave: 1999, Stanje: rabljeno, Used Entex Extruder PL-WE150 complete with control cabinet, previously used for powder coatings, in good condition. Nedpfx Agjbqt Ars Towc We can also offer you an Entex PL WE 70!

Leto izdelave: 1997, Stanje: dober (rabljeno), • Working width (mm): 1300 • CSD system • Cross sanding unit Nedpfx Ageidi Ive Towc • Longitudinal sanding unit - shoe type • Brushing unit • Ionisation