Stroj za zavezovanje trakov

Cyklop AT1600 A

Leto izdelave: 2009, stanje: dober (rabljeno), • Fully automatic • Maximum package height (mm): 650 • Minimum package height (mm): 15 • Maximum package width (mm): 1250 • Minimum package length (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 Bsdpfspu Anmox Apnodi • Outfeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Discharge table • Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M5608*10687, Leto izdelave: 2001, obratovalne ure: 35.000 h, nosilnost: 13.600 kg, dvižna višina: 5.250 mm, prosto dvigovanje: 1.750 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 3.200 mm, dolžina vilic: 2.400 mm, lastna masa: 19.321 kg, skupna dolžina: 5.455 mm, vrsta pogona: Diesel, gradbena širina: 2.550 mm, Viličar za težke tovore - Dizel Številka šasije: M5608*10687 Težišče tovora: 600 Tip droga: Triplex Bedpfjyldxmjx Apnedi Menjalnik: Clark 13.7HR32334-104 Stanje: Pripravljen za uporabo in popolnoma funkcionalen Tehnično stanje: dobro Prednje pnevmatike tip: zrak Prednje pnevmatike velikost: 12.00-20 Stanje prednjih pnevmatik: 80 - 100% Zadnje pnevmatike tip: zrak Zadnje pnevmatike velikost: 12.00-20 Stanje zadnjih pnevmatik: 40 - 60% Bočni pomik, nastavljiv nosilec vilic, Popolna kabina, dvojne pnevmatike,

Stanje: novo, Namenska stroj za izrezovanje ravnih utorov oziroma izrezov v različnih lesenih elementih, ki se uporabljajo pri splošnem mizarskem delu, izdelavi vrtnega pohištva, hišic, strešnih konstrukcij in montažnih lesenih objektov. Primeren je tudi za izdelavo vratnih okvirjev, izrezovanje ležišč za strešne nosilce ter pri izdelavi brunaric. Standardna oprema stroja vključuje vodoravne pnevmatske prijemalke za fiksiranje obdelovanca ter hidravlični blažilec (hydrocheck) za enakomeren in miren pomik glave rezilnika. Natančno kotalno vodenje po kaljeno brušenih vodilih. Robustna konstrukcija iz litega železa s stabilnim jeklenim podnožjem. Motor z močjo 3 kW. Največji premer orodja 250 mm. Vpetje orodja (premer izvrtine) 40 mm. Regulacija višine rezilne enote ročnim kolesom. Največja globina utora/izreza 60 mm. Širina utora/izreza: 60 mm v enem prehodu. Največji prehod orodja 250 mm. 2 vodoravni pnevmatski prijemalnika obdelovanca. Bdodpedy Hm Defx Apnji Hydrocheck blažilec za enakomeren pomik prečne roke. Priključek za odsesovanje prahu Ø 100 mm. Stroj je opremljen s podstavkom.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Bdodpjh Ek Dajfx Apnoi - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Krauss Maffei KM 250-900B Clamping force: 250 tonnes Year of manufacture: 1987 Bedpfxofp U Hvo Apnsdi Shot weight: 470 g Tie bar spacing: 630 x 560 mm

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), največja višina reza: 200 mm, premer žaginega lista: 520 mm, vrtljajska hitrost (min.): 2.800 obr/min, dolžina rezanja (maks.): 420 mm, višina obdelovanca (maks.): 200 mm, dolžina podajanja os X: 420 mm, dolžinski omejevalnik: 8.800 mm, pritisk: 5 letvica, zahteva za prostor dolžina: 8.800 mm, potrebna širina: 1.200 mm, Oprema: dvostranski, Mobile saw frame; total length approx. 8600 mm for Graule ZS 200 saw; stop roller conveyor on the left side 5200 mm, measuring length from 400 to 5960 mm, with digital LED length display, measuring length including extension approx. 8800 mm. Saw frame with 6 crank supports ensures stable standing during work. Equipped with electric power distribution and triple 230 V socket outlet. Bdjdpfev Hhg Tox Apnji Mobile saw frame Beck ESF 1, ZS 200 saw mounted on the frame.

Stanje: rabljeno, Double-sided cantilever racks STOW – used – excellent condition. The STOW wall-mounted cantilever rack is constructed from solid, heavy-duty steel I-beam profiles (H-beams) offering high load capacity. Each rack is equipped with 5 arms. The cantilever rack can be extended by additional sections (modules), adapting it to your evolving warehouse needs. The offer concerns single-sided STOW cantilever racks with 1 or 2 modules: Product code: MPP001693 Height: 750 cm Depth: 267 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile height: IPE 270 mm Net price: €1,069.00 per module/section (net). Product code: MPP001694 Bdsdpox Ig Hmefx Apnoi Height: 750 cm Depth: 270 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile height: IPE 300 mm Net price: €1,239.00 per module/section (net). Product code: MPP001695 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile height: IPE 330 mm Net price: €1,569.00 per module/section (net). Product code: MPP001699 Height: 750 cm Depth: 267 cm Bay width: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile height: IPE 270 mm Net price: €2,079.00 for 2 modules/sections (net). Product code: MPP001700 Height: 750 cm Depth: 270 cm Bay width: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile height: IPE 300 mm Net price: €2,479.00 for 2 modules/sections (net). Product code: MPP001701 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg I-beam profile height: IPE 300 mm Net price: €3,139.00 for 2 modules/sections (net). Additionally, we have large quantities of warehouse racking from various manufacturers such as MECALUX, STOW, MAGO, BITO, SHAFER, WDX, SLP, DEXION, PROMAG etc., with high load capacities, available in stock, undamaged, in very good technical condition. We also offer a complete range of accessories for these systems such as cross beams, mesh shelves, WEMA grating, bumpers, anchor bolts, and more. You are welcome to arrange your own transport and collect the goods from our warehouse in Chmielów 39-441, Poland. * Large quantities in stock * Delivery available throughout Europe * Location: Poland

Stanje: novo, Working length 4000, 5000 mm Working height 120 mm Tiltable: yes Rapid DGS 200 Double Mitre Saw ----- with saw blade diameter 420 mm, manual length adjustment with digital length display Perfect dimensional and angular accuracy guaranteed. We use precise and efficient drive technology for this: Linear ball bearing guides for length adjustment, spring-mounted tilting units for convenient and safe angle adjustment between 45° and 90°. Both length and angle adjustment on this double-head mitre saw are performed manually. Enhanced operator comfort and productivity can be achieved by means of the digital length display. Bdedpfexmk Amsx Apnei System features: ----- - Manual length and angle adjustment - Saw blade Ø 420 mm - Robust welded frame construction - Ball-bearing linear guides with long service life - Hardened guide shafts - Electronically balanced saw blade flange - Direct-drive motor - Tilting axis mounted on both sides Digital length display: ----- - Digital length display with 30 profile numbers and associated corrections - Edit the 30 profile numbers (name + correction) directly via the display - Correction calculated automatically according to saw angle (45° and 90°) - Piece counter: If the length display changes by more than 0.1 mm, the piece count resets to "0" - Stop for short parts: automatic conversion of length and profile height according to angle position Application examples: ----- Window, door, façade, conservatory, insect screen profiles, partition wall systems, interior sliding door elements - PVC, PVC-aluminium - Aluminium - Wood, wood-aluminium Maximum precision thanks to twin-shaft guidance ----- With 420 mm saw blades, a wide range of aluminium or PVC profile systems can be processed. Simple operation, maximum precision, and reliability make the DGS200 particularly attractive for insect screen frame production in small batches. The DGS200 double mitre saw is also popular as an entry-level model for window manufacturing. In the woodworking sector, the saw is used for cutting a variety of strips in furniture construction and interior design. Technical data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Tilting range: manually adjustable 45° to 90° Saw blade: 420 mm diameter Cutting lengths: 4,000 mm, 5,000 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders (optional) Length adjustment: manual Air pressure: 7 bar Dimensions: 5200 / 1200 / 1500 mm Weight: 800 kg (Technical data as per manufacturer – no guarantee!)

Stanje: zelo dobro (rabljeno), Strapping Machine SIVORON / GIGANT Model S 669 L - Integrated strap spool - Strap width: 6 / 9 / 12 / 15.5 mm - Electrical connection: 230 V, 50 Hz - Adjustable strap tension - Heat-sealing system - Idle rollers in worktable - Mobile with swivel castors Bodpfx Apeuxm Hasnedi Dimensions (L x W x H): 1460 x 600 x 1600 mm Weight: approx. 70 kg Note on used machines: • Technical details and interim sale subject to change and errors excepted. • All prices quoted are ex works – loading free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, The CIDAN MEGAPRO folding machine is the most powerful model in the product family. Its robust and stable construction enables it to bend 6 mm steel (5 mm at 4100 mm working length) or 4 mm stainless steel (3.2 mm at 4100 mm) along the entire working length (at a working length of 3,100 mm). The MEGAPRO comes standard with numerous intelligent functions such as automatic sheet thickness adjustment, automatic bending angle adjustment, and CNC crowning in the table. It is also equipped with a pneumatic tool clamping system. Various backgauge lengths are available upon request. Key advantages: - For high speed and precision, the upper beam and folding beam are equipped with dual servo drives. - CNC-controlled sheet thickness setting, bending center and crowning. - Choice of gooseneck or straight rail (up to 150 mm) can be used. - The upper beam achieves a clamping force of up to 60 tons. Bedpfetvl Sgox Apnsdi Performance: 6 mm at 400 N/mm² (5 mm at a working length of 4100 mm) 5 mm at 600 N/mm² (3.2 mm at a working length of 4100 mm) 9 mm at 200 N/mm² (7.5 mm at a working length of 4100 mm)