Izsekovalne stiskalnice nakup rabljenega (49)

Stanje: zelo dobro (rabljeno), Spotting Press Manufacturer: REIS Model: TUS 160 Machine no.: 03011 Itodjwu E Ivjpfx Ah Den Year of manufacture: 1981 Pressing force: 160 t Return force: t Maximum stroke: 150 mm Ejector force: t Ejector stroke: mm Operating pressure: 200 bar Clamping table area: 1,550 x 1,800 mm Upper plate: 1,550 x 1,800 mm Distance between columns: 1,620 mm Daylight opening: 1,800 mm Table load (bottom): 20 t Table load (rotary table): 6 t Column diameter: 200 mm Connected load: kW Oil tank capacity: 400 l Dimensions: 5,500 x 2,800 x approx. 6,500 mm Weight: t Equipment: Condition: very good ATTENTION: Dismantling must be carried out by the buyer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, razmak između stupova: 2.130 mm, skupna masa: 56.000 kg, sila umika: 55 t, vpenjalna sila: 2.000 kN, MIL263, right-hand version for floor installation few operating hours Siemens S7-1500 / Multipanel TP1200 diagnosis system 2 pcs. Sitema safety catches (fall protection) lower pull-out table; upper machine table tiltable by 180 degrees rotary table with 5 positions Iedpfxswu Upio Ah Dotn electronic parallelism control separate hydraulic unit on rolling trolley for core pulls 4+4, standard version pump with 8 l/min, 2.2 kW

Stanje: dober (rabljeno), Leto izdelave: 1998, Manufacturer: REIS Type: TUS 130 - 200 Control system: Siemens SIMATIC OP7 Year of manufacture: 1998 Specifications Metric US Standard Clearance between uprights: 1360 mm Isdeu U Nb Aepfx Ah Dstn Installation height: 1700 mm Table length: 1600 mm Ram stroke: 1800 mm Approach speed: 200 mm/min Working speed: 50 mm/min Return speed: 180 mm/min Table travel: 1700 mm Dimensions (approximate) Length: 4900 mm Width: 2800 mm Height: 5600 mm Weight: 18800 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend verifying all critical details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Pressure: 100 t Table length: 1,300 mm Table width: 1,000 mm Max. table load: 8,000 / 4,000 kg Clearance between columns (front): 1,050 mm Installation height: 1,100 mm Stroke: 1,100 mm Pressing speed: 50 mm/sec Return force: 40 t Operating voltage: 400 V Total power requirement: 10.0 kVA Ijdsv Sdy Hopfx Ah Djtn Machine weight: approx. 10.0 t Space requirements: approx. 3.95 x 2.35 x 4.03 m - Factory No.: 0222400

Stanje: rabljeno, Pressure 160 t Isdpfx Asiulkqeh Dotn Passage width / mm Stroke / mm Working height 800 mm Total power requirement 15 kW Machine weight approx. 11.8 t - Table size: 1000x1000 mm - Distance between table and ram, large stroke at top, adjustment at top: 800 mm Additional information: Extendable table

Stanje: rabljeno, Leto izdelave: 1980, Pressure: 24 t Table length: 1060 mm Table width: 650 mm Minimum opening: 165 mm Isdpfx Aoufufbeh Dstn Space requirement approx.: 1300 x 700 x 1500 mm

Stanje: rabljeno, Leto izdelave: 1983, Funkcionalnost: nepreverjeno, številka stroja/vozila: 02.056.00, skupna masa: 11.000 kg, zahteva za prostor dolžina: 2.420 mm, potrebna širina: 2.040 mm, potrebna višina: 3.220 mm, TECHNIČNI PODATKI: - Tlačna sila (brezstopenjsko nastavljiva): 1000 kN - Največja sila izmetalnika: 30 kN - Povratna sila: 300 kN - Hitrost stiskanja: 8 mm/s - Hitri pomik: 48 mm/s - Hitrost odpiranja: 44 mm/s - Hitrost povratka: 23 mm/s - Hod stiskalnice: 600 mm - Hod pršilne šobe: 70 mm - Največja količina pršenja: 5 dm³ - Gornja površina prečne rampe: 1000 x 1200 mm - Spodnja površina prečne rampe: 998 x 1280 mm - Razdalja med stebri: 1130 mm - Ravninska vzporednost med zgornjo in spodnjo ploščo: +/- 0,1 na dolžini 600 mm z enakomerno porazdelitvijo obremenitve - Največja teža orodja (kalupa): 7000 kg - Nosilnost vrtljive plošče: 3500 kg - Priključna moč: 30 kW - Moč motorja: 7,5 kW - Tlak pršenja max-min.: 4 - 10 bar - Največji delovni tlak: 190 bar Isdsupy Abjpfx Ah Dstn - Povratni tlak: 190 bar - Poraba stisnjenega zraka pri vbrizgavanju: 20 - 50 Ndm³ - Rezervoar: 140 l

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, širina mize: 980 mm, dolžina mize: 750 mm, Insolvency auction – all machines are fully operational and ready for demonstration. Property of a German GmbH. TECHNICAL DETAILS Max. clamping force: 300 kN Max. load capacity (lower platen): 4,000 kg Max. load capacity (upper platen): 1,200 kg Swivel angle: 360° TABLE DATA Table dimensions: 980 x 750 mm Passage opening: 1,090 x 920 mm MACHINE DETAILS Machine weight: 3,900 kg Dimensions: 2,200 x 1,900 x 2,300 mm Itsdpfx Asvxtikjh Den EQUIPMENT Energy storage (stroke trigger) Special wax injection unit User-friendly control panel with graphical display

Stanje: dober (rabljeno), Leto izdelave: 2002, Manufacturer: Millutensil Model: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure: 0 - 250 bar T-slot size: T-22 Opening force: 35 tons Closing force: 150 tons Distance between columns: 2130 mm Table height above floor: 770 mm Upper table rotation: 180 degrees Itodpfx Ahowpkv Is Dsn Specifications Metric US Standard Capacity 30000 Distance between columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Approach speed 3900 - 4800 mm/min Working speed 480 mm/min Return speed 2100 - 3000 mm/min Dimensions (estimated) Length 6150 mm Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, neither representations nor contractual terms are implied. We recommend that you verify all key details.

Stanje: rabljeno, Leto izdelave: 1995, Pressing force: 80 t Table length: 1,200 mm Table width: 1,000 mm Min. working height: 250 mm Max. working height: 1,200 mm Max. table load: 7,000 kg Clearance between uprights: 1,100 mm Operating voltage: 400 V Iodjvbwitopfx Ah Dotn Machine weight: approx. 11.0 t Required floor space: approx. 4.40 x 2.58 x 3.66 m - Factory No.: 760/12312 The dimensions of the upper and lower platens are 1,200 × 1,000 mm. The press upper platen can be tilted downwards by up to -150°. The lower platen can be tilted up to 70° at the front and rear. The press is equipped with: - 2 knock-out triggers for improved visualization of non-contacting areas, - a wax injection unit for checking dimensions and flash formation on the test piece, and - a hydraulic ejector cylinder in the lower table.

Stanje: dober (rabljeno), Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 64511, hod: 500 mm, stiskalna sila: 100 t, Very rarely used trial press for commissioning new tools. Machine operates perfectly. Pressing force: 100 t Distance table – ram: 500 mm Table size: 1100 x 800 mm Iodem Rgh Tepfx Ah Dotn Weight: approx. 7 t Dimensions: 2300 x 1100 x 3000 mm (LWH) Hydraulic unit: 1200 x 1200 x 1600 mm (LWH) Free loaded.

Stanje: dober (rabljeno), Leto izdelave: 1986, Pressing force: 400 kN Table size: 900 x 1,280 mm Ram size: 900 x 1,200 mm Ijdpfsthdbnjx Ah Dstn Mould weight: max. 7,000 kg Hydraulic motor power: 7.5 kW Stroke: 1,000 mm Other features: - Mobile die table - Tilting table Weight: approx. 7,000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 02.291.00, vgradna višina: 950 mm, tabela razdalj do bata: 700 mm, sila umika: 450 t, stiskalna sila: 100 t, kapaciteta rezervoarja za olje: 200 l, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Pressing force: max. 1,000 kN Return force: max. 450 kN Clamping plate size: 850 × 1,100 mm Installation height: 950 mm Max. installation height (in 100 mm increments): 1,150 mm Ram stroke without swivelling device: max. 700 mm Ram stroke with 90° swivel device: max. 700 mm Ram stroke with 180° swivel device: max. 1,000 mm Max. possible ram stroke (in 100 mm increments): max. 1,200 mm Mould weight: max. 5,000 kg Load capacity of upper clamping plate: max. 2,500 kg Load capacity of tilting device: 3,000 kg Tilting angle: 65° Positioning accuracy Flatness parallelism: 0.02 mm/1,000 mm Horizontal positioning accuracy: 0.04 mm Speeds Closing speed: max. 50 mm/s Opening speed: max. 50 mm/s Carriage speed standard: max. 50 mm/s Iedpsu Szzcsfx Ah Dotn Carriage speed increased: max. 200 mm/s Swivelling speed standard: max. 50 mm/s Swivelling speed increased: max. 180 mm/s Tilting speed standard: max. 50 mm/s Tilting speed increased: max. 100 mm/s Hydraulics System pressure closing: max. 190 bar System pressure opening: max. 200 bar Injection unit Pressure: 4-10 bar Volume: 3 l Ejector Ejector force table: max. 35 kN Ejector stroke table: max. 130 mm Ejector travel table: max. 100 mm Ejector force ram: max. 48 kN Ejector stroke ram: max. 150 mm Drawing cushion Cushion force: 250 kN Size: 550 x 750 mm MACHINE DETAILS Connected load: max. 10 kVA Drive power: max. 7.5 kW Tank capacity: 200 l Machine weight: 8,500 kg

Stanje: novo, Leto izdelave: 2019, številka stroja/vozila: DF0309, Pressure: 200 t Table length: 2500 mm Table width: 2000 mm Max. stroke: 2050 mm Dimensions L x W x H: approx. 9200 x 4700 x 5800 mm Retracting force: 25 t Machine weight approx. (without operating materials): 50 t Column diameter: 210 mm Table swiveling speed: 25 mm/sec Table extension: 2000 mm Movable table speed: 30 mm/sec Max. table load: 15 t Drive power: 20 kW Adjustable working speed: 1 - 10 mm/sec Approach speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Oil tank: 400 l Oil cooling (electric): 1.5 kW (max) Platform height: 650 mm Table height: 800 mm Ram height: 850 mm Control system Siemens: S7 1200 Monitor: WEG 12 inch Hydraulics and tank on top of the press: 10,200 ? Surrounding maintenance balcony: 5,000 ? Ejector in table (capacity 30 tons, stroke 250 mm): 4,000 ? Two controlled hydraulic inlets and outlets: 1,000 ? Rotatable (up to 180°), electrically driven table: 18,000 ? Safety guard around work area: 1,500 ? Table plate tiltable by 75°: 12,000 ? Upper tool foldable: 170 degrees Swivel table: 75 degrees Table tiltable: 75 degrees Ejector with 60T in the ram center: 12,000 ? Ram plate foldable by 180 degrees: 14,000 ? Functioning of the spotting press: Control operation modes: The control features "Manual" and "Semi-automatic" mode. In manual mode (joystick operation): - The table can be hydraulically extended and retracted at max. 30 mm/sec - The table can be hydraulically tilted up to the set angle at max. 25 mm/sec - The ram plate can be hydraulically lowered and folded by 90° and extended up to 180° - Pressureless movement is possible - Pressure can be set via the monitor - The speed can be adjusted between 1 and 10 mm/sec - An additional hydraulic cylinder (core pull, etc.), located on the tool, can be controlled In semi-automatic mode: - The ram can perform rapid traverse up to 10 mm/sec - A pre-programmed cycle (input via monitor) can be executed. Example: - 30 t pressure - Upper limit 300 mm - Lower max. limit 900 mm Isdpefxyi Dsfx Ah Djtn - Speed change point 850 mm - Rapid traverse at 10 mm/sec - Pressing speed from 850 mm only 10 mm/sec - Dwell time at set pressure or BDC 1 second - Return to upper stop Joystick function: The lever can be pulled (downward motion) or pushed (upward motion). The more it is pulled or pushed, the faster the machine moves. 1 to 10 mm/sec for downward travel and 1 to 25 mm/sec for upward motion are possible. Monitor view: On the large touchscreen monitor, the ram position, set pressure, and active speed are always visible. In semi-automatic mode, all cycle values are displayed. They can be saved or loaded as needed. The control panel consists of two-hand operation, the joystick, the emergency stop button, and the mode selector for: - Table extension/retraction (two-hand operation active) - Table tilt up/down (two-hand operation active) - Ram raise/lower (joystick active) - Ram plate lower/raise (two-hand operation active)

Stanje: dober (rabljeno), Hydraulic Press TCS - 150T MACH-ID 8821 Manufacturer: TCS Model: 150T Control: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load, sliding table: 20,000 kg Table load, upper table: 9,000 kg Table outfeed stroke: 2,100 mm Column diameter: 180 mm Closing force: 1,500 kN Opening force: 700 kN Laser safety: CE-certified safety system Power: 15 kW Specifications Metric US Standard Distance between uprights: 2,000 mm Installation height: 2,000 mm Table size: 1,500 x 2,000 mm Ram stroke: 1,800 mm Approach speed: 50 mm/min Working speed: 8 mm/min Return speed: 50 mm/min Table rotation: 0 – 270 U/min Table rotation: 0 – 180° Iodsulwzmjpfx Ah Dstn Dimensions (approximate) Length: 4,800 mm Width: 5,600 mm Height: 5,200 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute any representation or contractual terms. We recommend checking all critical details.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, RAVNALNI STROJ Itedpfsvupcljx Ah Dsn LDM PRESEKALNA LINIJA (CUT TO LENGTH LINE) 1500x6

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Machine model: HMG-200JM 1: Servo-hydraulic motor 2: Magnetic table Specification: Clamping force: 2000 kN Table size: 1800 x 1500 mm Maximum mold weight: 20,000 kg Iedpfx Aheug T Rxo Dstn Machine weight: 32,000 kg Machine dimensions: 6,200 x 2,750 x 5,800 mm

Stanje: kot nova (razstavni stroj), Leto izdelave: 2015, Pressure: 63 t Table length: 700 mm Table width: 1000 mm Machine weight approx.: 9 t Required space approx.: 4500 x 4300 x 2700 mm Main cylinder: 1 unit Stroke length: 1200 mm Installation height: Table/Ram at Top: 1200 mm Table height: 700 mm Table extendable: up to 1200 mm Table tiltable: up to 45 degrees Upper tool foldable: up to 170 degrees Distance between columns: 1250 x 1000 mm Isdpfxjffamqe Ah Detn Max. table load: 5 t Table travel speed: 25 mm/sec Approach speed: 95 mm/sec Return speed: 80 mm/sec Working speed adjustable: from 0 to 10 mm/sec. The linear scale continuously reports the ram position to the control system. The travel path, upper stop point, switching point (where the press changes from fast approach to working speed), and the target end position can be easily and quickly entered via the monitor control system. The working speed can be adjusted in increments of 1 mm/sec from 5 to 10 mm and in increments of 10 mm from 10 to 95 mm. The control system monitors the safety zones, the entire hydraulics, and the pump. The control cabinet is housed in a separate control enclosure.

Stanje: dober (rabljeno), Manufacturer: Millutensil Model: BV 25 PM Year of manufacture: 1987 Closing force: up to 18,000 kg Opening force: up to 15,000 kg Powered infeed and outfeed table Upper table rotation: 270° Upper table size: 900 x 550 mm Ijdpfxjrr Ui Rs Ah Dstn Specifications: Metric / US Standard Distance between uprights: 930 mm Daylight (installation height): 760 mm Table dimensions: 755 x 755 mm Ram stroke: 600 mm Approach speed: 1,000 mm/min Working speed: 1,000 mm/min Return speed: 1,000 mm/min Table rotation: 360 °/min Approximate dimensions: Length: 1,350 mm Width: 1,350 mm Height: 2,000 mm Weight: 1,500 kg

Stanje: novo, številka stroja/vozila: DF0261 - Rev.00, Pressure: 63 t Table length: 1200 mm Table width: 1000 mm Max. stroke: 1050 mm Dimensions (L x W x H): approx. 3350 x 1800 x 4700 mm Return force: 6 t Approx. machine weight (without operating fluids): 10 t Itsdpfx Asfhcc Sjh Djn Column diameter: 120 mm Upper tool foldable: 180 degrees Swivel table: 75 degrees Table swiveling speed: 25 mm/sec Tilting table: 75 degrees Table extendable: 1100 mm Max. table load: 5 t Motor power: 10 kW Oil tank: 200 l Oil cooling (electric): 1.5 kW (max) Monitor: (WEG) 12 inch

Stanje: rabljeno, Leto izdelave: 2019, Pressure: 200 t Stroke: 800 mm Total power requirement: 25 kW Return force: 16 t Main cylinder: 1 unit Column diameter: 150 mm Installation height: 1200 mm Ram height: 1000 mm Ram size: 1300 x 2220 mm Table surface: 1500 x 1300 mm Total table size: 1300 x 2220 mm Lateral column spacing: 820 mm Table surface: 1500 x 1300 mm Table height: 800 mm Max. table load: 8 t Approach speed: 1 - 9.8 mm/sec Return speed: 2.5 - 25 mm/sec Oil volume AW 46: 300 l Machine weight approx.: 17 t Dimensions (L/W/H): 2420 x 1300 x 4782 mm Pressure adjustable via rotary control, displayed on manometer: 0 - 200 t Speed adjustable via rotary control: 1 - 10 mm Itsded E Irljpfx Ah Djn Oil cooler: electric

Stanje: kot nova (razstavni stroj), Leto izdelave: 2015, številka stroja/vozila: 4293, Pressure: 40 t Table length: 1000 mm Table width: 700 mm Installation height (distance from worktable to ram plate): 1200 mm Number of cylinders: 1 pc Stroke length: 1200 mm Table height above floor: 700 mm Table extendable: 1200 mm Table travel speed: 25 mm/sec Table tiltable: 45 degrees Max. table load: 5 t Upper tool foldable: 170 degrees Clearance between columns: 1250 x 1000 mm Max. rapid approach speed: 95 mm/sec Return speed: 80 mm/sec Working speed: 0 - 10 / 10 - 155 mm/sec Dimensions (L x W x H): 4300 x 2700 x 4500 mm Total weight (without operating fluids): 8.5 t Siemens monitor: 9 inch Sick light sensors: 1200 mm Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45), surface induction-hardened and chrome-plated. Control system operation: The linear scale continuously reports the ram position to the control system. The travel path, upper stop position, and switching point—where the press changes from rapid traverse to working speed—as well as the target end position can be set quickly and easily using the monitor control panel. The working speed can be set from 0 to 10 mm/sec in 1 mm increments and from 10 to 155 mm/sec in 10 mm increments. The control system monitors the safety zones, the entire hydraulic system, and the pump, and is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm for reduced travel distances. Scope of delivery includes: Ijdpfx Ajdxrqxjh Dotn Manuals and operating instructions for the motors, pumps, and the press itself CE Declaration. The machine complies with the EU Machinery Directive 2006/42/EC Hydraulic Presses

Stanje: novo, Leto izdelave: 2025, Table size 1200x1000 mm Ram rotates up to 180 degrees Table extends up to 1000 mm Table can be rotated 180 degrees around the axis Table can be tilted up to 75 degrees Speed downwards 1-10 mm/sec, upwards 25 mm/sec Maximum open height 1300 mm Stroke 800 mm Table traverses at 30 mm/sec Weight 11.5 t Height 3000 mm Width 2900 mm SIEMENS S7 1200 Complete hydraulics by BOSCH REXROTH Itsdpev N D Ncefx Ah Dsn Complete control cabinet technology by SIEMENS Manufactured under German supervision in Brazil, CE compliant

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 4273, Pressure: 110 t Table length: 1200 mm Table width: 1000 mm Max. stroke: 1150 mm Dimensions (L x W x H): 4200 x 2400 x 4800 mm Return force: 11 t Max. stroke: 1150 mm Weight: 16 t Table stroke: 1200 mm Swiveling table: 45 degrees Max. table load: 12 t Movable table speed: 25 mm/sec Table swivel speed: 10 mm/sec Drive power: 23 kW Voltage: 400 V Control voltage: 24 V DC Frequency: 50 Hz Adjustable working speed: 0 - 10 mm/sec Iedpfxed Ap Ugs Ah Djtn Return speed: 130 mm/sec Rapid traverse speed: 195 mm/sec Machine color: Grey 7035 RAL Movable part color: Orange 2009 RAL Other components color: Dark grey 7021 RAL Oil tank: 400 l Recommended oil: DIN HLP / ISO VG 46