Vzorčni tisk

Hidralmac Tuschierpresse

Stanje: kot nova (razstavni stroj), Leto izdelave: 2015, stiskalna sila: 63 t, Tryout Press – Manufacturer Hidralmac – 63 t Tryout Press – Table 1,000 × 700 mm For sale is a hydraulic tryout press from Hidralmac with a pressing force of 63 t. This machine features an extendable and tiltable table, a foldable upper tool, as well as a precisely controllable monitor-based control system. It is especially suitable for spotting, tuning, and tryout tasks in tool and mold making. ==== Technical Data & Information: Tryout Press Hidralmac – 63 t Tryout Press ==== General Information - Manufacturer: Hidralmac - Model: Tryout Press - Design: Tryout / Spotting Press - Press Force: 63 t - Machine Weight: approx. 9 t - Space Requirement: approx. 4,500 × 4,300 × 2,700 mm ==== Working Area - Installation Height (table/ram): 1,200 mm - Stroke: 1,200 mm - Table Height: 700 mm - Area Between Columns: 1,250 × 1,000 mm ==== Table System - Table Size: 1,000 × 700 mm - Table Travel (extendable): 1,200 mm - Table Tilt: up to 45° - Table Travel Speed: 25 mm/s - Max. Table Load: 5 t ==== Tool Mounting - Upper Tool Foldable: up to 170° ==== Hydraulics and Drive - Main Cylinder: 1 piece ==== Speeds - Advance Speed: 95 mm/s - Return Speed: 80 mm/s - Working Speed: 0–10 mm/s (adjustable) Bwjdpfsffamqex Agtsl ==== Control - Monitor-based control system - Linear measurement system for position monitoring - Adjustable: travel distance, holding points, switching points - Stepwise speed regulation - Monitoring of hydraulics, pump and safety areas - Separate control cabinet ===== Spotting, tool tuning, tool tryouts, mold making, tool making, tryout operations, tuning processes Spotting Press, Tryout Press, Tool Tuning Press, Tool Try Out Press, Testing Press, Hydraulic Press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which sets an even higher standard. Our core strength lies in special-purpose machinery construction and press automation. We supply customized hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Stroj še obratuje v proizvodnji. Po dogovoru možen ogled. Bwjdeqhkukepfx Agtel

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 4273, stiskalna sila: 110 t, Tryout Press – Manufacturer Hidralmac – 110 t Spotting Press – Table 1,200 × 1,000 mm For sale is a high-performance tryout spotting press by Hidralmac with a pressing force of 110 t. The machine features a tilting and traversing table, a generous stroke of 1,150 mm, high rapid-traverse speeds, and is particularly suited for spotting, adjustment, and tryout tasks in tool and mold making. ==== Technical Data & Information: Spotting Press Hidralmac – 110 t Tryout Press ==== General Information - Manufacturer: Hidralmac - Model: Spotting Press - Type: Tryout Press / Spotting Press - Pressing Force: 110 t - Machine Weight: approx. 16 t - Dimensions (L × W × H): 4,200 × 2,400 × 4,800 mm ==== Working Area - Max. Stroke: 1,150 mm - Table Travel: 1,200 mm ==== Table System - Table Size: 1,200 × 1,000 mm - Tilting Table: up to 45° - Max. Table Load: 12 t - Table Traverse Speed: 25 mm/s - Table Tilting Speed: 10 mm/s ==== Forces - Return Force: 11 t ==== Speeds - Working Speed: 0 – 10 mm/s (adjustable) - Return Speed: 130 mm/s - Rapid Traverse: 195 mm/s ==== Hydraulics - Drive Power: 23 kW - Oil Tank: 400 l - Recommended Oil: DIN HLP / ISO VG 46 ==== Electrical - Voltage: 400 V - Control Voltage: 24 V DC - Frequency: 50 Hz Bwjdpfsd Ap Ugsx Agtsl ==== Features - Paintwork: - Machine body: RAL 7035 (Grey) - Moving parts: RAL 2009 (Orange) - Other parts: RAL 7021 (Dark grey) ===== Spotting operations, tool adjustment, tool try-outs, mold making, toolmaking, tryout tasks, adjustment processes, large tooling Spotting press, tool tryout press, tryout press, tool adjustment press, tool try-out press, tryout press, hydraulic press Are you looking for a hydraulic press tailored to your requirements? Contact us for a customized offer. Our hydraulic presses are built in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed both Canadian and European safety requirements, as they fully comply with all aspects of the Brazilian national safety guideline NR 12, which is based on these standards. Our particular strength lies in the manufacture of special-purpose machines and press automation. We supply custom-made hydraulic presses at surprisingly competitive prices. The press hydraulics are predominantly fitted with components from leading European manufacturers.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2016, stiskalna sila: 40 t, Spotting Press – Manufacturer HIDRALMAC – 40 t Tryout Press – Table 1,000 × 700 mm Available for immediate sale is a hydraulic spotting press from HIDRALMAC with a pressing force of 40 t. The machine features an extendable, tiltable, and rotatable table, a daylight opening of 1,200 mm, as well as a modern monitor-based control system. It is ideally suited for spotting, adjustment, and tryout work in tool and mold making. ==== Technical Specifications & Information: Spotting Press HIDRALMAC – 40 t Tryout Press ==== General Information - Manufacturer: HIDRALMAC - Model: Spotting Press - Type: Tryout / Spotting Press - Pressing Force: 40 t - Machine Weight: approx. 9 t - Required Floor Space: approx. 4,000 × 4,400 × 1,800 mm ==== Working Area - Daylight Opening: 1,200 mm - Stroke: 1,050 mm ==== Table System - Table Size: 1,000 × 700 mm - Table Extension Travel: 1,050 mm - Table Tilting Angle: up to 50° - Table Rotation: 180° - Table Travel Speed: 25 mm/s - Max. Table Load: 5 t ==== Tool Mounting - Upper tool fold-down: up to 180° Bsdpjhtm E Nofx Agtjwl - Ram plate hydraulically fold-down: up to approx. 175° ==== Hydraulics and Drive - Main Cylinder: 1 unit - Hydraulics: Bosch Rexroth - Motors: WEG ==== Speeds - Approach Speed: 100 mm/s - Return Speed: 100 mm/s - Working Speed: 0–10 mm/s (adjustable) ==== Control System - Siemens control with monitor (9") - 200 program memory slots - USB interface - Remote function for service and maintenance - Adjustable: pressure, stroke, speed - Linear measurement system for position monitoring - Stop point and changeover programming ==== Safety - SICK light curtains (1,250 mm) - Complete monitoring of working area ==== Equipment - Control panel on swivel arm - Two-hand operation on movable stand - Work area lighting - Electrical cabinet to the left of the machine - Maintenance balcony with marine ladder - Heavy-duty welded construction to DIN 8651 - Columns and cylinders made of SAE 1045 (C45), induction-hardened and chrome-plated ==== Scope of Delivery - CE certificate - Operating manual and technical documentation (German) ===== Spotting operations, tool adjustment, tryout applications, mold making, tool making, tryout work, alignment processes, tool handling Spotting press, tryout press, tool try-out press, tool adjustment press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our core strength is the construction of special purpose machines and press automation. We supply bespoke hydraulic presses at surprisingly attractive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Stanje: novo, Primerljivo z Behringer, Kaltenbach, Kasto, Jaespa itd. Rezno območje 90° okroglo 260 mm ploščato 300x260 mm najmanjši premer 5 mm NC-krmiljen, avtomatski podajalnik materiala s hidravličnim popolnim vpenjanjem materiala enostavno upravljanje preko NC-krmiljenja z jasnim tekstovnim prikazom Funkcija prednastavitve materiala brez ponovnega vpenjanja pri kratkih segmentih Stabilna, linearno vodena pomična čeljust s servopozicioniranjem za maksimalno natančnost Samodejna nastavitev vodila traku glede na širino materiala Priporočene opcije: poganjana krtača za ostružke, sinhronizirana s hitrostjo traku posebej postavljena nadzorna plošča 7" CE panel, možnost omrežne povezave, shranjevanje do 1000 zapisov, zgodovinski pomnilnik za različne funkcije in podatke itd. Bodsh Tnd Ajpfx Agtowl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, The machine can be used as a fully-featured universal machining center! We offer you the following: Manufacturer: DMG MORI Model: Lasertec 125 3D Hybrid Year of manufacture: 2019 Control: Celos with Siemens 840D sl Operate Technical Data: Travel paths: X-axis: 1,335 mm Y-axis: 1,250 mm Z-axis: 900 mm Rotary range: 360° Swivel range: + / - 120° Main spindle: Max. speed – main spindle: 20,000 rpm Drive power – main spindle (100/40%): 35 / 25 kW Max. torque: 130 / 86 Nm Rotary table: Table diameter: C-axis 1,250 x 1,000 mm integrated in fixed table 1,400 x 1,000 mm Max. table load: 2,000 kg Tool changer: Tool holder: HSK-63A Number of tool positions: 60 Max. tool diameter: 80 / 160 mm Max. tool length: 500 mm Chip-to-chip time: 6.5 sec Feeds: Rapid traverse: 40 m/min Laser specification: Laser type: Fiber-guided diode laser Power: 2,500 W Fiber diameter: 600 μm, NA 0.22 Wavelength: 1,030 +/- 10 nm Focal length: 200 mm Beam quality: 66 mm mrad Power stability: max +/- 2% (2h) Incl. pilot laser: 600 – 700 nm Operating hours: approx. 4,500 h Spindle hours: approx. 1,910 h Technical features & accessories: - Automated changeover of the laser processing head for laser deposition or milling operations - Production package, consisting of: - Hinged belt chip conveyor - Coolant system, 600 l tank - Paper band filter - ICS (internal coolant supply) 40 bar - Chip flushing in work area door - Cleaning gun, 3 bar - Oil and emulsion mist extraction system - Cooling device for spindle-through air blast - Infrared probe, make: Renishaw PP60 optical (OMP60) - Tool measurement in work area, make: Blum Laser - Preparation 3D quickSET - MPC – Machine Protection Control - 4-color signal lamp - Optical powder feed rate sensor - Automatic work area door - Grating platform - Laser, consisting of: - Processing optics with focusing lens - Focal length 200 mm - Processing nozzle for 3 mm spot diameter - Water-air cooling unit for laser and processing head - 2nd collimation optics for 1.6 mm laser spot diameter - Alignment camera for laser/nozzle adjustment - incl. Adaptive process control - incl. extraction system with post-filter stage - active laser protection window - Extended powder feeder, consisting of: - Twin system (dual channel material feed) Bodpfx Agsyz Si Tstowl - Material capacity (2x): 5 l, feed rate: 0.5 – 15 g/min - 2x mass flow controllers for continuous material build-up - Automatic switching or mixing by simultaneous operation of both powder hoppers via NC commands - Powder monitoring and laser camera - Electronic handwheel - DECKEL MAHO MDynamics package - ATC (Application Tuning Cycle) - Power failure safety package Accessories, depicted tools and clamping devices are only included in delivery if mentioned in the additional information. Technical data, information and prior sale subject to change and errors excepted!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by prior appointment. Condition: Very good (high accuracy), immediately operational. Spindle hours (as of August 1, 2025): 9,580 h The core feature of the machine is the integrated traveling column with turning-milling spindle and interpolating B-axis. Machine basic data: * Partial hollow chuck device (hydraulic) * C-axis * Upper cross slide with turning/milling spindle as a motor spindle, with hydraulic clamping during turning, interface: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Tool disc magazine * Absolute, direct position measuring systems in X, Y, Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control unit: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Work area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar diameter: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turn-mill spindle: * Tool interface: Capto C6 * Spindle speed: up to 12,000 rpm Bwjdpfx Aew Hg Nlsgtsl * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (L/W/H) approx.: 6,860 x 4,220 x 2,530 mm * Approx. total weight: 18.5 t EQUIPMENT: Well-equipped ... * No steady rest * Complete documentation available No guarantee for completeness or accuracy of technical data and equipment specifications. A detailed technical data sheet and further information regarding the equipment are available on request.

Stanje: novo, Leto izdelave: 2023, Tube drilling machine, angle drilling machine, automatic drilling unit TDM100, manual operation, equipped with one drilling head AVAILABLE IMMEDIATELY FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Maximum tube length 3,000mm (option: 6,000mm) - Positioning accuracy +/- 0.2mm - 10 stops (can be extended as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube swiveling device Bwedjlgvkiopfx Agtel - Drilling unit power: 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit lighting - Integrated tool cabinet - For round tubes up to 114mm - For square profiles up to 100 x 100mm - For flat material up to 100 x 15mm - For T-profiles up to 100 x 100 x 12mm - For L-profiles up to 100 x 100 x 8mm - For double posts up to 100 x 15mm - Flow drilling up to M12 - Drillings up to Ø 50mm

Stanje: novo, - Capacity: 1070 x 2 mm - Conical rolling - Removable top roll - Foot control - Emergency stop Bwjdpshc Uvmjfx Agtel - Documentation - 400V

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, -KOM 1002- Offered here is a press from HYDRAP, model HKPS8000. Technical data: Type: HKPS8000 Year of manufacture: 1975 Usable stroke: 200 mm Throat depth: 250 mm (central) Table size: 320 x 320 mm Installation height: approx. 345 mm Voltage: 380V Permissible load: 80,000 N Drive type: HYDR (hydraulic) Bjdpeg Ufvbjfx Agtewl Motor power: 1.5 kW Oil capacity: 60 l Oil viscosity: 3°E You will receive a proper invoice with stated VAT upon purchase. We have many other interesting items for sale as well. Feel free to check out all our listings. If you are interested or have any questions, please feel free to contact us via the messaging function!