Spotting press

Millutensil BV 25 PM

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2017, obratovalne ure: 6.900 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 300 mm, Največja teža obdelovanca: 500 kg Pomiki: X: 350 mm Y: 250 mm Z: 300 mm C: 360° Isdpfx Asv Ai Ukef Toal Leto izdelave: 2017 16-pozicijski izmenjevalec RTC

Stanje: zelo dobro (rabljeno), Engel Victory 1350/220 Tech Clamping Force: 220 tonnes Year of Manufacture: 2004 Iedpfepdrpzjx Af Toal Platen Size (W x H): 860 x 830 mm Screw Diameter: 55 mm (618 cm³) Control System: CC 200 Minimum Tool Installation Height: 250 mm Maximum: 730 mm

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system Iaodpsu Dm E Hsfx Af Tsl • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, skupna dolžina: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle on the X-axis. All assemblies are refurbished to a like-new condition. After overhaul, the machine is comparable to a new machine. Geometry: The machine is completely disassembled down to the guideways. Before the geometry of the individual tables and assemblies can be restored, both the X- and Z-axis guideways are hand-scraped and brought to a like-new condition. Upon completion, the machine receives a measurement protocol in accordance with the manufacturer’s specifications. Painting: After restoring the machine’s geometry, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and newly painted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Equipment: Technical Data: Centre height: 150 mm Centre distance: 680 mm Iaodpourw Uysfx Af Tol Grinding length: 620 mm Machine weight and footprint: 2,500 kg // 2,340 x 1,445 x 1,900 mm Standard machine equipment: 1 pc. workpiece spindle headstock MK5 1 pc. operator panel 1 pc. mount for internal grinding spindle 1 pc. speed controller for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit Optional: • 2-axis digital measuring system • Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds available upon clarification of technical details) • Separate low-speed setting for part alignment

Leto izdelave: 2024, Stanje: novo, Outreach: 5 m Total column height: 5.5 m Load capacity: 80 kg Hook travel: 4.3 m *NEW* Never used *Original packaging* DEMAG Pillar-Mounted Slewing Crane - Load capacity 80 kg Iodpjvzhhtsfx Af Teal with electric chain hoist, crane DEMAG type DCM-Pro 2 80 1/1 H4.3 V16/4 - Year of manufacture: Hook travel max. 4.3 m - Chain size: 4.2 x 12.2 RDC/TDK - Power supply: 380 - 415 V - Control voltage: 24 V

Stanje: rabljeno, Leto izdelave: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t Iaodpfx Ajt Hxamjf Tsl G E I B E L & H O T Z CNC cycle-controlled precision surface grinding machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal travel 900 mm): 800 mm Max. grinding width (cross travel 500 mm): 500 mm Max. grinding height under wheel: approx. 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total drive approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • Easy-to-program GEIBEL & HOTZ grinding cycle control • Model SL with standard grinding programs including surface and multi-surface grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, loading station stop – all inputs/parameters via operator panel and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronics and SIEMENS OP 25 • Table movement via roller ring screw drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical axes driven by ball screw • Diamond dresser on the left side of the table next to the magnetic plate, with automatic dressing cycle, compensation, pull-back, and edge rounding on grinding wheels possible • MPM balancing device for grinding wheel • Mounted permanent electromagnet chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with separate band filter coolant filtration • Complete enclosure with electrically monitored sliding doors • Separate control cabinet, work lamp, various accessories, operation manuals Condition: Good to very good! The wide grinding wheel is suitable for large-area stock removal! Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Leto izdelave: 2022, obratovalne ure: 108 h, Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: SN2120, EDM312MF30-SLM (second-life machine) Technical Data: Travel distances: 450x300x300mm Workpiece clamping table: 820x400mm Tank dimensions: 900x520mm Filling height: 300mm Distance table/electrode holder: 150/450mm Max. workpiece weight: 800kg Max. dielectric fluid: 700l Dimensions (W x D x H): 2700x1800x2350mm Machine weight: 2500kg Iaedpehtrdyofx Af Tel Power supply: 3/N/PE 400/230V 50Hz Connected load: 6.7 KVA Equipment: Color: newly painted in light grey + tele grey New control cabinet New APC910/2 controller (Win10) MF30 V2.8 operating interface New B&R drives with Endat interface Touch screen display Exopuls+ 60A generator Rev.4 5-position tool changer (WZW) Contact protection operable via push button Linear scales on all axes X, Y, Z (Fagor) 2 cartridge filters Termogamma cooling unit Completely new machine wiring New ball screws, bearings, coupling Maintenance unit with digital pressure switch Valve terminal CO² extinguishing system C-axis Hirschmann 50 rpm, holding brake overhauled Handheld control panel with enabling switch Automatic lowering tank Clamping chucks: Erowa IST, Hirschmann, 3R 12 months warranty Transport On-site commissioning Training

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61037337, vpenjalna sila: 800 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 103 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 900 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g,

Stanje: rabljeno, Leto izdelave: 1990, x-travel 400 mm y-travel 330 mm z-travel 350 mm Total power requirement 6.3 kW Machine weight approx. 2 t Space requirement approx. 7.36 m² O F F E R We can offer you, subject to prior sale and errors, ex-stock on a non-binding basis: H E R M L E CNC-controlled Universal Tool Milling Machine with 4th axis Model UWF 600 CNC ( HDH TNC 355 ) Year of manufacture 1990 # 8637 Table travels: longitudinal X 400 mm vertical Z 350 mm Cross travel Y 330 mm Table size 630 x 335 mm Spindle taper SK 40 Spindle speeds in 3 ranges Vertical / Horizontal 40 – 6,000 rpm Quill stroke Vertical 63 mm Feeds, infinitely variable 1 – 2,000 mm/min Feed force 4,800 N Rapid traverse 5,000 mm/min Spindle drive 3.5 kW Total connected load 6.3 kW - 380 V - 50 Hz Weight 2,000 kg Iajdpfxst Hxbwo Af Tol Accessories / Special equipment • HEIDENHAIN 4-axis contour control Type TNC 355 with graphics and various subprograms, mobile electronic handwheel • Fixed angular table installed, fitted with CNC dividing head by HOFMANN with RÖHM three-jaw chuck 160 mm dia., center height approx. 125 mm, possibly also tiltable. Resolution 0.001° (dividing head can also be removed!) • Vertical head easily swivels away for use of the horizontal spindle • Hydraulic tool clamping in the V-spindle, 5 various arbor holders • Free-standing control cabinet, free-standing coolant facility • Central lubrication, ampere meter, etc. An ideal machine for toolmaking and electrode production Condition: good – ready for demonstration, HDH control computer was replaced Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice Further conventional and CNC milling machines by DECKEL, MAHO, MIKRON or HERMLE as well as other renowned manufacturers available from stock! Please contact us.

Stanje: dober (rabljeno), Leto izdelave: 2016, Pomiki X Y Z: 1300 x 670 x 625 mm, velikost mize 1500 x 670 mm, maksimalna obremenitev mize 1300 kg. Iaedpfjxwytvsx Af Tjl min.-maks. višina vretena do mize 150-775 mm, hitrost vretena 12.000 min-1, stožec vretena BT40, 30-pozicijski avtomatski menjalnik orodij, zmogljivost vretena 18,5 kW, nadzor Fanuc i series, hlajenje skozi vreteno, miza s 4. osjo.