Vzorčni tisk

Hidrobrasil Tuschierpresse

Pressure: 200 t
Table length: 2500 mm
Table width: 2000 mm
Max. stroke: 2050 mm
Dimensions L x W x H: approx. 9200 x 4700 x 5800 mm
Retracting force: 25 t
Machine weight approx. (without operating materials): 50 t
Column diameter: 210 mm
Table swiveling speed: 25 mm/sec
Table extension: 2000 mm
Movable table speed: 30 mm/sec
Max. table load: 15 t
Drive power: 20 kW
Adjustable working speed: 1 - 10 mm/sec
Approach speed: 10 mm/sec
Return speed: 25 mm/sec
Rapid traverse speed: 10 mm/sec
Oil tank: 400 l
Oil cooling (electric): 1.5 kW (max)
Platform height: 650 mm
Table height: 800 mm
Ram height: 850 mm
Control system Siemens: S7 1200
Monitor: WEG 12 inch
Hydraulics and tank on top of the press: 10,200 ?
Surrounding maintenance balcony: 5,000 ?
Ejector in table (capacity 30 tons, stroke 250 mm): 4,000 ?
Two controlled hydraulic inlets and outlets: 1,000 ?
Rotatable (up to 180°), electrically driven table: 18,000 ?
Safety guard around work area: 1,500 ?
Hedjfxyi Dspfx Adkoni
Table plate tiltable by 75°: 12,000 ?
Upper tool foldable: 170 degrees
Swivel table: 75 degrees
Table tiltable: 75 degrees
Ejector with 60T in the ram center: 12,000 ?
Ram plate foldable by 180 degrees: 14,000 ?

Functioning of the spotting press:

Control operation modes:
The control features "Manual" and "Semi-automatic" mode.

In manual mode (joystick operation):

- The table can be hydraulically extended and retracted at max. 30 mm/sec
- The table can be hydraulically tilted up to the set angle at max. 25 mm/sec
- The ram plate can be hydraulically lowered and folded by 90° and extended up to 180°
- Pressureless movement is possible
- Pressure can be set via the monitor
- The speed can be adjusted between 1 and 10 mm/sec
- An additional hydraulic cylinder (core pull, etc.), located on the tool, can be controlled

In semi-automatic mode:

- The ram can perform rapid traverse up to 10 mm/sec
- A pre-programmed cycle (input via monitor) can be executed. Example:
- 30 t pressure
- Upper limit 300 mm
- Lower max. limit 900 mm
- Speed change point 850 mm
- Rapid traverse at 10 mm/sec
- Pressing speed from 850 mm only 10 mm/sec
- Dwell time at set pressure or BDC 1 second
- Return to upper stop

Joystick function:
The lever can be pulled (downward motion) or pushed (upward motion). The more it is pulled or pushed, the faster the machine moves. 1 to 10 mm/sec for downward travel and 1 to 25 mm/sec for upward motion are possible.

Monitor view:
On the large touchscreen monitor, the ram position, set pressure, and active speed are always visible.
In semi-automatic mode, all cycle values are displayed. They can be saved or loaded as needed.

The control panel consists of two-hand operation, the joystick, the emergency stop button, and the mode selector for:

- Table extension/retraction (two-hand operation active)
- Table tilt up/down (two-hand operation active)
- Ram raise/lower (joystick active)
- Ram plate lower/raise (two-hand operation active)

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.