Horizontalna obdelovalna centra s prečnim mizom (les) nakup rabljenega (203)

Stanje: rabljeno, Leto izdelave: 2012, Integrated NC processing centre for windows and doors comprising: A) Automatic Loader, Model 'SP' Automatic loader for Base SP with 1 profiling machine - Automatic loader consisting of: - Table with motorized belts - Automatic device for transferring parts from buffer to loading area of the profiling machine * Minimum workpiece length: 450 mm, maximum: 3200 mm * Minimum workpiece width: 40 mm, maximum: 230 mm * Minimum workpiece thickness: 40 mm, maximum: 120 mm * Working cycles: 10/min * Chain feed speed on table: 7 m/min * Loading table dimensions: 2800 x 2150 mm B) Automatic Moulder Model SUPERSET NT C 6 Position 1 = Planer spindle Position 2 = 1st right vertical spindle Position 3 = 1st left vertical spindle Hsdpfoixxwmjx Adksni Position 4 = 1st upper horizontal spindle Position 5 = 1st lower horizontal spindle Position 6 = Group for bead recovery 2500 mm infeed height Feed speed 6–36 m/min via inverter Nr. 1 - Motor power 5.5 HP (4 kW) Horizontal pressure roller in front of the planer with pneumatic disengagement from the control panel Pneumatic disengagement for the infeed unit before the planer spindle, controlled from the operator panel Tandem infeed group before the right vertical with quick release Feed units after the upper spindles to reduce trailing distance from 620 mm to 450 mm Infeed guide with bearings for automatic feeders Electrical set-up for the use of automatic loaders Manual central lubrication Pump for lubricating the worktable with automatic drive Preparation for inline integration with INTEGRA SYSTEM - Working height increased to 970 mm - Entry signal light - Piece counter Independent control panel POS. 1 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) T-SET quick-change tool clamping system - Enables locking/unlocking of the tool using a simple air nozzle POS. 2 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Vertical spindle with an effective length of 180 mm T-SET quick-change tool clamping system Electronic vertical positioning POS. 3 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) High-precision spindle Vertical spindle with an effective length of 180 mm T-SET quick-change tool clamping system Electronic horizontal positioning POS. 4 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Speed 8,300 rpm T-SET quick-change tool clamping system Electronic vertical positioning POS. 5 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for motors from 5.5 HP (4 kW) to 10 HP (7.5 kW) Speed 8,300 rpm T-SET quick-change tool clamping system POS. 6 Glazing bead recovery group Includes: PRL enables automatic transition from profiling to glazing bead recovery and vice versa - Working unit with spindle diameter 30 mm, length 30 mm - Electronic horizontal positioning - Electronic vertical positioning - Hardware and PLC modifications for axis management - Modified tandem outfeed

Stanje: rabljeno, Leto izdelave: 2017, Direct numerical control (NC HOPS) with Campus software Working area X-axis: 3400 mm Working area Y-axis: 1600 mm Working area Z-axis: 300 mm Worktable with 6 adjustable rails No. 3 suction cups per work rail for securing the workpiece No. 1 electro-spindle, 5 axes, 10 kW, with automatic tool changer, cone type HSK F63 Drilling head with 24 spindles as follows: - No. 12 vertical spindles, Y-axis - No. 6 vertical spindles, X-axis - No. 4 horizontal spindles, Y-axis Hnjdpfx Aswwiybodksi - No. 2 horizontal spindles, X-axis Automatic tool change system with 18 positions - located at the rear of the machine Front guard and safety system with mats and safety nets Automatic lubrication system Air conditioning for control cabinet No. 1 vacuum pump

Stanje: rabljeno, Leto izdelave: 2006, Numerical control XP 600 Working area in the X-axis: 3060 mm Working area in the Y-axis: 1140 mm Working area in the Z-axis: 160 mm Number of working zones: 2 Bar worktable Number of adjustable bars for suction cup support: 6 Number of pneumatic Bakelite bars for panel lifting (?): [please verify] 2 adjustable suction cups per bar, each with vacuum sealing for panel fixation during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions, located at the machine drilling head, cone type: ISO 30 Drilling head BH19L with 18 spindles, configured as follows: - 7 vertical on the X-axis - 6 vertical on the Y-axis - 4 horizontal on the X-axis - 2 horizontal on the Y-axis - 1 independent saw blade unit for grooving in the X-axis Hjdpfx Aov Aacfodksni Front photocell guard and safety system Automatic lubrication system (?) Climate control system for cooling and cleaning the machine control unit Vacuum pump: 250 m³/h TECHNICAL DETAILS MUST BE VERIFIED

Stanje: rabljeno, Leto izdelave: 2013, Machining center with automatic robotic loading and unloading system for panels. Numerical control: Biesse XP600 with graphical interface software Biesse Works ADVANCE (machine and office versions). WRT Technology (Windows Real Time): Machine control logic processed directly on the PC, not a dedicated specialist device. Working area X-axis: 6200 mm Working area Y-axis: 1552 mm Working area Z-axis: 180 mm Z-axis travel: 235 mm Number of working zones along X-axis: 2 Bar-type support table / console Number of EPS bars (electronically controlled bar positioning for suction cup holders): 10 8 pneumatic Bakelite bars for panel lifting – assists loading and unloading 4 EPS electronically adjustable suction cups per bar, with vacuum seal for securing the panel during machining Hjdpokvrxujfx Adkeni Spindle: 1 vertical electrospindle with automatic tool changer, 12 kW motor – 12,000 rpm, aggregate mounting flange, prepared for C-axis vector Automatic 12-position tool changer mounted on the machine head Drilling head BH35L, spindle configuration: - 14 vertical spindles in X - 10 vertical spindles in Y - 6 horizontal spindles in X - 4 horizontal spindles in Y Independent saw blade unit for grooving along X-axis – 120 mm diameter Front safety carpet and safety system Perimeter safety fencing Automatic lubrication system Machine-controlled cooling and cleaning system with air conditioner Vacuum pump 250 m³/h KUKA industrial robot with 6 articulated axes and point-to-point positioning. Independent operator console Panel orientation table Barcode scanner on the robot arm Panel feeding system including: * 1 motorized roller conveyor for preloading panel stacks * 1 motorized transfer roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical specifications: * Model: KR210-2 * Number of axes: 6 * Nominal payload: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel size – min./max. length: 300/3000 mm * Panel size – min./max. width: 180/1500 mm * Panel thickness – min./max.: 8/60 mm * Max. panel weight: 90 kg

Stanje: rabljeno, Leto izdelave: 2008, PC-based numerical control with XILOG PLUS software Mobile pendant with command functions The working area on the X-axis is 4400 mm Working area on the Y-axis: 1360 mm Working area on the Z-axis: 180 mm Travel path of Z-axis: 200 mm No. 2 working supports in X Hsdpfspvai Dsx Adkjni No. 8 manually adjustable panel support rails with positioning LEDs No. 3 suction cups for panel hold-down per rail No. 4 pneumatic Bakelite bars for lifting the panel (facilitates loading and unloading) No. 1 vertical electrospindle with vector axis and automatic tool changer, HSK 63 taper Automatic tool changer with 12 positions on the machining head Drilling head assembled as follows: No. 8 vertical X-axis spindles No. 5 vertical Y-axis spindles No. 4 horizontal X-axis spindles No. 2 horizontal Y-axis spindles Safety system with bumper system on operator head No. 1 vacuum pump, 100 m3/h Automatic lubrication

Stanje: rabljeno, Leto izdelave: 2009, Biesse factory control Working area on X-axis: 3500 mm Working area on Y-axis: 1585 mm Travel on Z-axis: 350 mm No. 2 working zones Bar worktable No. 8 adjustable rails No. 4 pneumatic Bakelite rails for panel lifting 3 adjustable suction cups per rail with vacuum seals to hold the panel during processing No. 1 four-axis vertical electrospindle (Vector) with automatic tool changer, HSK taper 10-position rotary tool changer on the machining head 24-position chain tool changer – located at the rear of the machine Drilling unit with vertical and horizontal spindles, composed as follows: - No. 12 vertical spindles in X direction - No. 12 vertical spindles in Y arrangement - No. 6 horizontal spindles in X direction - No. 4 horizontal spindles in Y arrangement - No. 1 independent saw blade for creating X grooves Hnsdpfx Adsw D Dhaskoi Front safety carpet and protection system Perimeter safety fence Chip extraction system with motorized conveyor Conditioning system for cooling and cleaning the machine control Vacuum pump 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Stanje: rabljeno, Leto izdelave: 2019, Numerical control with bSolid software. The multi-document software application in the Windows environment enables the design of the finished product, process definition, job planning, simulation of workpiece machining operations on the 3D model of the machine, and generation of the required machine programs. bSolid - 3-axis machining. Hedew D E A Espfx Adksni bSolid - 5-axis machining module for surface processing with 5-axis units and interpolated movements on all 5 available axes (X, Y, Z, C, B). The module includes the following commands: · Assignment to surfaces, 3D roughing and finishing operations · Spreading or projection of a path onto a curved surface · Machining on a plane · Following 2D or 3D curves with any tool type bSolid - 3D engraving bSolid - Import of external formats Working areas: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Workpiece support in Y: * 1650 mm with thickness up to 60 mm on modules with a height of 74 mm * 1600 mm with thickness above 60 mm on modules with a height of 74 mm 10 ATS levels – 40 trolleys. The code includes: • 2 aluminium bars (1 on the left and 1 on the right), on which the lateral stops slide. • 10 aluminium worktables. The worktables slide on hardened and ground linear guides with ball recirculation carriages. Locking is engaged on both linear guides, front and rear, by four pneumatic cylinders. Control is via a button in front of the working area. The carriages slide on steel rails, positioned above the extrusion. Pneumatic locking system, divided into 2 locking zones in X direction. Automatic positioning (EPS) for worktables. 'EPS' (Electronic Positioning System) device for automatic positioning of work surfaces and trolleys via NC, complete with locking devices that eliminate possible operating errors. Rear row stop with 140 mm stroke Middle row stop, positioned at 405 mm, with 140 mm stroke Front row stop, positioned at 1460 mm, with 140 mm stroke 4 side stops with 140 mm stroke (2 right + 2 left) with system 2 additional side stops with 140 mm stroke (1 right + 1 left) Sensor to check if the stops are lowered 12 clamping devices for narrow workpieces 6 loading aid bar lifters, for H=74 mm module Configuration 5A, for Rover B. Configuration for high productivity and flexibility thanks to the two operating units (4 and 5 axes) and the possibility to perform tool changes simultaneously. Includes the axes and carriages for movement of the main operating units. Includes 2 inverters. Second Y-axis. Enables the separation of the front and rear Y carriages with independent motorization. The two Y carriages have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 interface, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 mode. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 mode. • Ceramic bearings. • Clockwise and counterclockwise rotation. • Speed programmable via NC from 1,000 to 24,000 rpm. • The release is pneumatically actuated via a prismatic linear guide and ball bearing. A cover is included for chip extraction with 6 different positions i...

Stanje: rabljeno, Leto izdelave: 2018, Numerical control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia – IoT connectivity Office monitoring Working range on X-axis: 3228 mm Working range on Y-axis: 1580 mm Working range on Z-axis: 200 mm with suction cups H74 mm Working range on Z-axis: 245 mm with suction cups H29 mm No. 8 adjustable ATS panel support bars Pneumatic clamping system installed, divided into two Y-zones No. 6 pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for the bar Suction cup setup assistant No. 1 electrospindle (pantograph) with 4 axes, automatic tool changer, 13 kW motor (17.4 HP), liquid-cooled, HSK cone interface, 20,000 rpm Automatic 16-position tool changer on X-axis carriage Independent Tesa BH17 drilling spindles arranged as follows: No. 5 independent spindles for vertical drilling in “X” direction No. 5 independent spindles for vertical drilling in “Y” direction Hjdpougpwnsfx Adkoni No. 4 spindles for horizontal drilling in “X” direction No. 2 spindles for horizontal drilling in “Y” direction No. 1 blade integrated in drilling head, 120 mm diameter (usable cut 25 mm) GU60L gluing unit for EVA adhesive with pre-melter – edge pressing system with double rubber-coated roller for webs Maximum inner diameter 30 mm and sensor for edge joint detection – 500 ml glue pot mounted on glue roller – edge preheating lamp – edge feed system – edge trimming system – manual edge insertion capability Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminate edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum processable internal radius with edge processing: 30 mm Maximum external radius for edging, proportional to edge thickness and rigidity: * 10 mm with edge thickness up to 1 mm * 20 mm with 2 mm edge thickness * 30 mm with 3 mm edge thickness Minimum dimensions of the edged panel: 300 x 300 mm Minimum inner diameter for edges: 350 mm with plastic edges less than 1 mm thick and panel max. thickness 18 mm Double-position edge magazine in protective housing for edges up to max. 65 mm thickness Finishing agent cleaning station with automatic distribution of special cleaning fluids and cleaning cycle No. 1 rounding/chamfering unit for edges No. 1 EF60A combination trimming/scraping unit Perimeter safety fence Chip extraction system with motorised belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump with 250 m³/h capacity TECHNICAL DATA TO BE CONFIRMED

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: 1000025340, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.735 mm, pomik osi Y: 1.650 mm, pomik po osi Z: 245.290 mm, višina obdelovanca (maks.): 60 mm, proizvajalec krmilnikov: Biesse BH 660, bSolid, bEdge, hitri pomik na osi Z: 30 m/min, hitro pomikanje X-os: 85 m/min, hitri pomik os Y: 85 m/min, Trumpa aprašymas • Darbinės eigos pagal X ašį: 6735 mm • Darbinės eigos pagal Y ašį: 1650 mm • Darbo stalas: Pod and Rail • Pagrindinio elektros veleno galia: 13,2 kW • Valdomų ašių skaičius: 4 ašys • Maksimalus briaunos aukštis: 60 mm • Gręžimo spindelių bendras skaičius: 20 • Įrankių keitimo vietų skaičius: 16 Išsamus aprašymas • Subkategorija: CNC apdirbimo centrai frezavimui, gręžimui ir briaunavimui • Darbų tipas: briaunavimas, gręžimas, frezavimas • Maksimalus plokštės pravažiavimo aukštis: 60 mm • Darbo laukų skaičius: 2 • Darbo stalas: Pod and Rail • Bėgių skaičius: 10 • Padėties indikatoriai padėklams • Vakuuminės taurelės ruošiniui fiksuoti • Vakuuminių taurelių skaičius: 40 • Spaustuvai ruošiniui fiksuoti • Vakuuminis siurblys • Siurblių skaičius: 1 • Vieno siurblio našumas: 250 m3/h • Gręžimo mazgai: 1 • Pozicija: viršuje • Vertikalaus gręžimo spindelių skaičius: 20 • Horizontalaus gręžimo spindeliai X kryptimi: 4 • Horizontalaus gręžimo spindeliai Y kryptimi: 4 • Frezavimo velenai: 1 • Pozicija: viršuje • Valdomų ašių skaičius: 4 • Automatinis įrankių keitimas • Variklio galia: 13,2 kW • Briaunavimo mazgai: 1 • Klijavimo mazgas • Padėtis: sumontuotas ant pagrindinio mašinos rėmo • Klijų talpa skirtai karštam lydalio klijui • Briaunos ritinio žurnalas • Padėčių skaičius: 4 Hnedeycvcxepfx Adkji • Pjovimo/frezavimo mazgai: 2 (viršutiniai) • Pjovimo/frezavimo mazgas: fiksuotas pjovimui/frezavimui X, Y kryptimis • Įrankių žurnalas: 1 • Vieta: 16 • Įrankiai montuojami ant apdirbimo galvos • Dvigubos funkcijos galva – briaunos grandymas ir klijų likučių pašalinimas • Oro srovelės įrenginys briaunų valymui • Valdymo sistema: PC Control • Programinė įranga: Bsolid • Apsauginė konstrukcija su saugos jutikliais • Atliekų drožlių transporterio juosta

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), Technical Specifications: Console table 3050 x 1200 mm with 6 manually adjustable consoles, each console equipped with 2 vacuum cups and one pneumatic lift rail. Point laser set-up aid, vacuum pump. Control: CNC XILOG Plus. Main spindle 8.5 kW (12 HP) HSK 63F with C-axis, 1,500 – 24,000 rpm. 12-position disc-type tool changer. 1 adapter unit with tilting saw blade. Drilling unit with: - 12 vertical spindles - 4+2 horizontal spindles - Grooving saw Bumper safety system Hnjdpfx Askqyizedkoi The tools, HSK tool holders, drills, etc. shown in the photos are not included in the scope of delivery!

Stanje: dober (rabljeno), Leto izdelave: 2009, I am selling a 3-axis CNC machining center, HOLZ-HER PRO-MASTER 7023, with traversing table, year of manufacture 2009. Configuration: Hodpfxstt S D Ro Adkeni - 3-axis main spindle, 6 kW - Tool magazine with 4 positions, HSK63 on the head - 1x grooving saw, X-direction - Drilling head with 16+4+2 drilling spindles - Usable working area: 3200 x 1060 x 378 mm - 2 working fields, 4 clamping zones - Automatic central lubrication system - Holzher software with operating manual - BECKER pump, 250 m³/h - Additional vacuum for template work or supplementary clamping devices Good condition. Available immediately from stock.

Stanje: dober (rabljeno), Leto izdelave: 2000, I am selling a 3-axis CNC machining center HOLZ-HER ECO-MASTER 7113 with beam table, year of manufacture 2000. Configuration: - 3-axis main spindle, 7.5 kW Hodpfxjtt Sy Hs Adkeni - Tool changer with 4 positions HSK63 mounted on the head - 1x grooving saw in X-direction - Drilling unit with 9+2 spindles - Usable working area: 2300 x 1000 x 130 mm - 2 work surfaces, 4 clamping zones - Automatic central lubrication system - HOLZ-HER software with operating manual - RIETSCHLE pump 2.2 kW - Additional vacuum for template work or extra clamping devices Good condition. Immediately available from stock.

Stanje: dober (rabljeno), Leto izdelave: 2011, I am selling a 3-axis CNC machining center HOMAG WEEKE VENTURE 106M with traversing table, year of manufacture 2011. Configuration: - 3-axis main spindle, 9 kW - Tool magazine with 9 positions, HSK63, mounted on the machine frame - 1x groove saw in X-direction - Drilling head with 12+4+2 drilling spindles - Usable working area: 3050 x 1260 mm - 2 working areas, 2 clamping zones - Automatic central lubrication system - Software: WoodWop 6.0 with operating manual - Pump: BECKER, 110 m3/h - Additional vacuum for template work or extra clamping devices Good condition. Available immediately from stock. Hnedpfx Ajvld Epjdkji

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.280 mm, pomik osi Y: 1.320 mm, pomik po osi Z: 170 mm, število mest v zalogovniku orodij: 12, The machine will be provided "free loaded onto truck". No dismantling or loading costs! TECHNICAL DETAILS Travel X-axis: 3,280 mm Hnedpfx Asvvvcbedksi Travel Y-axis: 1,320 mm Travel Z-axis: 170 mm CNC control: BiesseWorks Work beams: 6 pcs Suction cups: 18 pcs Tool magazines: 12 MACHINE DETAILS Total weight: 3,000 kg Electrical Input voltage: 400 V Type of input current: AC Required power: 25 kW EQUIPMENT - Safety mats - BECKER vacuum pump

Stanje: dober (rabljeno), Leto izdelave: 2004, I am selling a 3-axis CNC machining center Biesse Rover 24L with traverse table, year of manufacture 2004. Hjdsh Txlcopfx Adkeni Configuration: 3-axis main spindle HSD, fully overhauled and water-cooled (RS1600) Tool magazine with 7 positions, ISO30 at the head 1x grooving saw, X-direction Drilling head with 14+4+2 drilling spindles Usable working area: 4500x1330mm 2 working areas, 4 clamping zones Automatic central lubrication system Total power: 35 kW XDNC 2.01 software with operating manual Becker pump 250/300 m³/h, 5.5 kW Additional vacuum for template work or auxiliary clamping devices Good condition. Immediately available from stock. Requires repair: Hand grips on the traverse table, rotation of the ISO30 magazine at the head.

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 94323, potovalna razdalja osi X: 3.060 mm, pomik osi Y: 1.260 mm, pomik po osi Z: 150 mm, skupna višina: 2.400 mm, skupna dolžina: 4.400 mm, skupna širina: 2.800 mm, skupna masa: 3.130 kg, For sale: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC machining center Hodpfxowpthts Adksni Fully operational, available for inspection in Wadowice X-axis travel: 3060 mm Y-axis travel: 1260 mm Z-axis travel: 150 mm Control type: CNC XP 600

Stanje: novo, Travel paths (X, Y, Z): 3950, 2145, 555 mm Number of spindles vertical drilling head: 13 pcs Number of spindles horizontal drilling head: 6 pcs Number of tools: 22 pcs Number of milling units: 1 pc Working area: 3200 x 2000 x 200 mm Motor power: 12 kW Control: Beckhoff CNC Number of axes: 5 pcs Masterwood Project 485 CNC Machining Centre ----- 5-axis CNC machining centre with gantry design (allowing for very large panels to be loaded) for interior fittings and all types of panel processing. Brief Overview: ----- Travel paths: X = 3950 mm; Y = 2145 mm; Z = 555 mm Working area: X = 3200 mm; Y = 2000 mm; Z = 200 mm 1 pc. high-performance 5-axis spindle, 12 kW, with HSK 63 F tool holder 1 pc. fixed drilling head with 19 spindles with 7 individually selectable vertical drilling spindles (X direction) with 6 individually selectable vertical drilling spindles (Y direction) with 2 double horizontal drilling spindles (X direction) and 1 double horizontal drilling spindle (Y direction) Sawing unit integrated into drilling head Carousel tool changer with 22 positions and 102 mm pitch distance Console table with 6 traverses Workpiece lifting device 24 pcs. vacuum clamps for panels and interior fittings 1 pc. vacuum pump 100 m³/h CE safety system with bumper and safety fence Reference stops with limit sensors Reference ring for angle gearbox KIT for arch processing (prepared for the use of solid wood clamps) Automatic tool length measuring device Remote control Beckhoff control and Bosch drive system Design software Masterwork: 2D-Wop for standard panel processing/interior fittings, curved arches, doors Masterwork function for dowel connection Master 3D Level 2: for more complex processing, optionally upgradeable to full 5-axis interpolation Delivery and installation within Germany Technology and services according to the detailed description attached Hnedpfx Asd N Rt Uodksi ----- SPECIAL PRICE for this configuration: €99,990.00 plus VAT! ----- Detailed description available in the attached PDF. More options on request! (Technical specifications according to the manufacturer – subject to change and without guarantee!)

Stanje: novo, Maximum workpiece length: 3,200 / 5,100 mm Milling spindle: 1 unit Main motor: 12 kW Control: Beckhoff CNC Number of axes: 5 Hnjdpfsd Rhd Rjx Adkei Masterwood Project 385 CNC Machining Centre ----- 5-axis CNC machining centre in gantry design for use in interior fittings, window, and door production Short summary: ----- Working area: X = 3,200 mm (Optionally 5,100 mm); Y = 1,500 mm; Z = 200 mm 1 x 5-axis high-performance spindle, 12 kW, with HSK 63 F interface 1 x fixed drilling head with 19 spindles: - 7 individually selectable vertical drilling spindles in X direction - 6 individually selectable vertical drilling spindles in Y direction - 2 double horizontal drilling spindles in X direction - 1 double horizontal drilling spindle in Y direction Saw unit integrated in drilling head 27 tool change positions: - Carousel tool changer with 22 positions and 102 mm pitch - Linear 5-position tool magazine for large tool diameters Console table with 6 cross supports 6 workpiece lifting devices in "window version" with 3 controlled heights Veneer stops 6 special clamps for straight window and door elements 1 special clamp for small parts 18 vacuum clamps for panels and interior fittings 1 vacuum pump, 100 m³/h 1 remote control Design software Masterwork: - 2D-Wop for standard panel machining/interior fitting, doors Master 3D Level 2: - For more complex machining, - optionally expandable for fully interpolating 5-axis processing Freight and installation within Germany Technology and services as per attached detailed description ----- Total price in this configuration: on request! ----- Options such as increased working length, special clamps for arched windows, additional tool changers, or window-specific software available on request! Detailed description see attached PDF. (Technical data as per manufacturer – subject to change without notice!)

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis, pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis, pendulum operation: 600 mm Y-axis: 1,240 mm Worktable: 8 ATS workpiece supports, each with 3 vacuum suction cups 8 rear workpiece stops, lowerable via program, integrated in each support Hjdpjxraimjfx Adkeni 8 workpiece stops, 670 mm from the back, mounted in each support, 2 + 2 lateral workpiece stops 4 removable central stops 6 lifting rails, pneumatically lowerable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum suction cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate working zones in X direction Vacuum support system for clamping templates Chip conveyor integrated in the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW S1 operation), HSK 63 F Mounted on Z1 axis Rotational speed 1,000 – 24,000 rpm Clockwise/counterclockwise rotation C axis, 360° for adapter units Cleaning nozzle for cleaning the milled edge before the edge-banding process 16-position tool magazine Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC-controlled, with endless 360° rotation Glue application for hot-melt adhesive Double pressure roller, changeable and switchable Heating lamp for preheating the edge material End trimming unit for cutting the edge material at an 8° angle to the workpiece edge using a circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid edge thickness 0.4 – 2 mm (*) (Best results obtained using primed wood edges 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14, max. 60 mm Min. internal radius 18 mm (for edge thickness less than 1 mm) Min. internal radius 30 mm (with edge thickness 2 mm) Min. panel size for edge banding: 300 x 300 mm Min. size for internal cutout banding: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety features: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/radius milling unit - Combined profile/flat scraper aggregate - Saw unit

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, 5-osni portalni obdelovalni center za proizvodnjo delov stolov, miz, vrat itd. iz lesa ter MDF Največja uporabna delovna površina (X-Y-Z) mm: 3550 x 1800 x 750 Moč vretena: 2 x 7,5 kW Obrati vretena: 2000 - 18000 obr./min Hedjxau Uyopfx Adkoni Oprema: - Korpus - 2 x pomični nalagalni mizi - glava s 4 vreteni - 2 x nalagalni magazin - numerični krmilnik - električna omara - upravljalna plošča - zaščitna kabina

Leto izdelave: 1994, stanje: rabljeno, • Further information: on request Hedpfx Adsnzh Uxsksni

Stanje: dober (rabljeno), Leto izdelave: 2018, številka stroja/vozila: 1000028154, Funkcionalnost: popolnoma funkcionalen, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Stroj je bil zagnan leta 2019, en lastnik. Uporabljan je bil zelo malo časa. Opis Uporabno delovno območje, konfiguracija 5 osi: X=3280mm, Y=1600mm Hodi osi: X=3706mm, Y=2294mm, Z1=515mm, Z2=371mm Hitrost pomika osi: X=80 m/min, Y=60 m/min, Z=30 m/min Elektrovreteno: HSD 5-osna 11 kW z neprekinjenim vrtenjem za 360° na oseh B in C, omogoča zelo natančno obdelavo kompleksnih oblik Hodpfoxdl H Usx Adkeni hlajeno s tekočino Vrtalna glava: HSD 20 navpičnih vreten 4 vodoravna rezalni diski na osi X rezalni diski na osi Y Delovna miza: 6 prečk Isbjwhypnjni Itxtobb 4 priseski na vsaki prečki priprava za uniclamp Zaloge orodij: revolverski zalogovnik s 16 pozicijami Vakuumski sistem: Vakuumska črpalka s kapaciteto 250 m³/h, ki zagotavlja trdno pritrditev obdelovancev med obdelovanjem.

Stanje: rabljeno, Leto izdelave: 2003, številka stroja/vozila: AP 133 D3, 5-axis machining center Balestrini IDEA 2 Axis travel range: X - 1500 mm Y - 1200 mm Z - 700 mm Hnjdpfxowrb Uaj Adksi Working range: X - 100 mm Y - 2x500 mm Z - 600 mm Spindle power: 7.5 kW Table can be divided along its width 2 vacuum pumps included 4-position spindle Windows 2000 operating system Price stated is net Dismantling is the responsibility of the buyer

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: AP 194 J4, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 1.600 mm, pomik po osi Z: 700 mm, dolžina podajanja os X: 1.200 mm, dolžina pomika po osi Y: 1.200 mm, dolžina podajanja os Z: 600 mm, moč polirne enote: 7.500 W, 5-axis machining center Balestrini IDEA 2 Axis travel range: X - 30,000 mm Y - 1,600 mm Z - 700 mm Working area: X - 2,000 mm Y - 2 x 500 mm Z - 600 mm Spindle power: 7.5 kW Option to split the table widthwise 2x vacuum pumps included 4-position spindle Tool magazine - 4 positions Enclosed machine roof for dust extraction Windows XP Hodpfx Adswrb Tpjkeni Listed price is net Disassembly is the responsibility of the customer

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.250 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 125 mm, največja hitrost vrtenja: 24.000 obr/min, Glavna moč motorja: 12 kW Podpora navora = da 4. os – C os 5. os – vmesnik agregata Sistem vpenjanja orodja – HSK-F63 Pozicije menjalca orodij – 14 Število zamenljivih enot – 3 Vertikalna vrtalna vretena – 19 Horizontalna X – 4 Hedoya Aimjpfx Adksni Horizontalna Y – 2 Rezkar za utore – 90° vrtljiv Vakuumska črpalka – da Varnostna naprava – varnostna preproga Krmiljenje – Homag Power Control PC st Programska oprema – Homag Woodwop 5.0 Teža – 4.500 kg CE certifikat – da Potreben prostor Dolžina = 6580 Širina = 4580 Dve vrsti ustavljal Pomožna naprava za menjavo orodij Pomožna podpora za obdelovance