Krožne žage za lahke kovine / aluminij – popolnoma avtomatske nakup rabljenega (65)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, High-Performance Automatic Saw / Manufacturer: PRESSTA-EISELE Model: Profilma 510 / Year of manufacture: 09/2008 Description: * High-performance sawing machine with fully automatic operation * Very high cutting precision * Short cycle times * Low-burr sawing * High reliability * Low maintenance requirements Ijdpfx Adjw D T Uiokohw Suitable for aluminum and plastic; ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm. The saw can be viewed and tested under power by appointment. Previous use: Cutting of corner connectors. Very well-maintained, ready-to-operate used condition. Technical data: - Saw motor: 7.5 kW, S6 - Speed: 2,000 - 3,500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1,000 mm / 5-fold reversal possible - Cut length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on cut length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1,750 kg - Dimensions (L/W/H): 2,700 x 1,400 x 2,300 mm Equipment: - Siemens S7 control panel - Fully automatic bar feeder - Roller conveyors - Extraction unit - Chip bunker - Various accessories - CE marking No guarantee as to the completeness or correctness of the technical data and equipment. Subject to prior sale.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, General overhaul 2025 Saw blade: 350 - 400 mm Motor power: 6.5 / 8.5 kW Speed: 1500/3000 rpm Cutting speed: 1650 – 3800 m/min Saw height adjustment: electronic Working range, square max.: 120x120 mm Working range, flat max.: 200x100 mm Working range, flat (extra wide) max.: 250x70 mm Working range, round max.: 130 mm Saw feed rate: 0 – 40 mm/s, infinitely adjustable Cut-off length: 5-600 mm (up to 9999 mm with multiple strokes) Feed speed max.: 500 mm/s Weight approx.: 1300 kg Dimensions (LxWxH): 1800mm x 1300mm x 1950mm The machine will undergo a complete general overhaul at our facility and will be in like-new condition afterwards. Among other things, the following components will be renewed: - Conversion to PLC control - Conversion to Siemens HMI operator interface - Conversion to ball screw drive with servo control - New electrical components - New pneumatic lines - New pneumatic components - Retrofitting to valve terminal - Optimization of extraction performance - New minimum-quantity lubrication system - Replacement of general wear parts - Overhaul of the enclosure Iodpfjxpqzhex Adkjhw The machine is additionally equipped with: - Soundproof enclosure - Kerf widening system (for high-quality cut surfaces without return marks) Optional equipment: - Mass clamping system for parallel sawing of multiple workpieces - Flat magazine for automatic feeding of raw materials up to 6 m in length - 7.5 kW motor - 12 kW motor - Delivery and installation at your location - Training of your staff

Stanje: novo, Leto izdelave: 2023, SPECIAL PRICE, Stock machine year 2023, 4 units available! List price for standard machine + option Minimal Lubrication System "LUBETOOL": €28,810 STOCK MACHINE -- Fully automatic aluminium circular saw for 90° cuts with drilling unit TR 12 (up to ø 10 mm) or TR 20 (up to ø 20 mm), offering simple, safe operation and excellent cutting performance. This machine is only capable of making 90° cuts! Workpieces can be drilled and cut in a single operation. Technical Data: ● Cutting capacity: 90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm ● Drive power: 1.9 kW / 400 V / 50 Hz ● Blade speed: 3000 rpm Ijdemftiwjpfx Adkehw ● Feed: Single stroke 300 mm (double stroke up to 600 mm) ● Max. cutting height: 100 mm ● Blade dimensions: 350 x 32 mm Standard configuration: ● 90° cutting machine with powerful drive motor ● User-friendly, large operating panel ● Section length adjustable from 5 to 300 mm via handwheel and counter ● Main clamp with 3 pneumatic clamping cylinders: 1 horizontal, 2 vertical ● Feed clamp with horizontal and vertical pneumatic clamping cylinder ● Large safety hood covers the entire working area, raised pneumatically ● Adjustable cutting and feed speeds ● Air gun for machine cleaning ● Connections for extraction system ● TR 12 or TR 20, fixed automatic drilling unit with a single tool holder, spindle speed and drilling depth manually adjustable, drilling cycle automatic ● Optionally mounted on stock machine: Minimal lubrication system "LUBETOOL" with two pumps --> Also available as CNC version or in various sizes!

Stanje: novo, Leto izdelave: 2023, SPECIAL PRICE, stock machine year 2023, condition: new List price + Option Minimal Lubrication System LUBETOOL: €15,370 STOCK MACHINE -- Fully automatic aluminum circular saw for 90° cuts Easy and safe operation with excellent cutting performance. This machine can only perform 90° cuts! Technical data: ● Cutting range: 90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm ● Drive power: 1.9 kW / 400 V / 50 Hz ● Speed: 3000 rpm ● Feed: single stroke 300 mm (double stroke up to 600 mm) ● Max. cutting height: 100 mm ● Blade dimensions: 350 x 32 mm Ihsdpevurgyofx Adkew Standard equipment: ● Machine for 90° cuts, featuring a high-performance drive motor ● Clearly laid out, large control panel ● Adjustable cut length from 5 to 300 mm via handwheel and counter ● Main clamping vice with 3 pneumatic cylinders: 1 horizontal, 2 vertical! ● Feed vice with horizontal and vertical pneumatic clamping cylinders! ● Large protective hood covering the entire working area, pneumatically lifted ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for extraction unit Optional, mounted on stock machine: ● Minimum quantity lubrication system "LUBETOOL" with one pump and pressure regulation

Leto izdelave: 2001, stanje: dober (rabljeno), številka stroja/vozila: 129603-40-6, Technical Data: - Saw blade dimensions: 300 x 3.4 x 32 mm - Saw blade speed: rpm - Cutting capacity - at 90° round: 90 mm - or square: 80 mm - Pneumatic vices Ihsdpfjd Aai Tox Adkew - Automatic material feed with position control - Single stroke up to approx. 1000 mm - Multiple stroke - Swiveling operator panel with CNC control MEP - Motorized dust extraction + mobile chip extraction - Drive: 400 V / 1.1 kW - Required space: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Stanje: novo, Mitre Saw Automatic UK-450 - Saw blade diameter: 450 mm - Processing length according to customer requirements - Automatic positioning - Automatic mitre adjustment (up to +/- 60°) - Application: Suitable for working with wood, plastics, and aluminium - Feed table as smooth table (optionally as roller conveyor) Ihodpfxod Rhzxe Adkjw Further technical details and information available on request.

Stanje: dober (rabljeno), Brand: SOLING Model: SCR 125 Type: Automatic hydraulic Maximum cutting diameter: 20 mm Minimum cutting diameter: 6 mm Bar loader up to: 6,500 mm Maximum cutting length: 1,000 mm Minimum cutting length: 180 mm Isdpfskwdfqox Adkehw Components Automatic bar loader Automatic bar feeder Hydraulic cutting head Electric control panel Adjustable cutting length stop Instruction manual

Stanje: novo, Saw blade diameter: 130 mm Cutting capacity at 90° (round): 130 mm Cutting capacity at 90° (square): 120 mm Cutting capacity at 90° (flat): 180 x 100 mm Cutting capacity at 45° (round): 115 mm Cutting capacity at 45° (square): 100 mm Isdehpktyjpfx Adkehw Cutting capacity at 45° (flat): 120 x 100 mm Motor: 3.3 / 4.4 kW Speed: 1400 / 2800 rpm Machine weight: approx. 1060 kg Dimensions (L x W x H): 2.5 x 1.8 x 1.85 m TIGER 402 CNC HR, automatic electromechanical vertical circular saw designed for use with carbide saw blades, suitable for serial cuts from 45° right to 60° left.

Stanje: rabljeno, Saw blade diameter 350 mm Cutting range at 90° (round): 120 mm Cutting range at 90° (square): 110 mm Cutting range at 90° (flat): 200 x 88 mm Cutting range at 45° (round): 115 mm Cutting range at 45° (square): 110 mm Cutting range at 45° (rectangular): 150 x 80 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.59 t Dimensions (L x W x H): 1.9 x 1.4 x 1.8 m Hydropneumatic fully automatic machine · Miter cutting left/right · Head angle cuts up to 45° (tilting head) · Hydro-pneumatic saw head control · Pneumatic double clamping device · Pneumatic vertical clamping device · Electro-pneumatic material feed unit with material hold-down · Vernier scale for fine length adjustment Iodpfx Asd Iinzjdkehw · Integrated coolant spray unit · Chip extraction nozzle on saw blade guard · Minimum remnant length in automatic operation: 210 mm MPS control system: · Storage of cut start/end · Displays current draw, piece count, cutting time, etc. · Adjustable water cooling · Cutting pressure regulator

Stanje: rabljeno, Leto izdelave: 1997, Premer žaginega lista 350 mm Obseg reza pri 90 stopinjah: okroglo 120 mm Obseg reza pri 90 stopinjah: kvadratno 110 mm Obseg reza pri 90 stopinjah: ploščato 200x88 mm Obseg reza pri 45 stopinjah: okroglo 115 mm Obseg reza pri 45 stopinjah: kvadratno 110 mm Obseg reza pri 45 stopinjah: ploščato 150x80 mm Potreba po skupni moči 1,5/1,8 kW Teža stroja pribl. 0,59 t Dimenzije D x Š x V 1,9 x 1,4 x 1,8 m Ihodpjxf I U Dofx Adkow Hidropnevmatski polavtomat · Poševni rezi levo/desno · Glava za poševne reze do 45° (šifter) levo/desno · Enota za pomik materiala z vpenjalcem · Integrirana naprava za brizganje hladilne tekočine · MPS krmiljenje: · Shranjevanje začetka/konce reza · Prikaz porabe toka, števila kosov, časa reza... · Nastavljivo vodno hlajenje · Regulator pritiska reza

Stanje: rabljeno, Saw blade diameter: 350 mm Cutting range at 90°: round 120 mm Cutting range at 90°: square 110 mm Cutting range at 90°: flat 200x88 mm Cutting range at 45°: round 115 mm Cutting range at 45°: square 110 mm Cutting range at 45°: rectangular 150x80 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.59 t Dimensions (L x W x H): 1.1 x 0.95 x 1.7 m Special price for new machines includes: - Starter Kit 2 - Micro spray system Available for demonstration in our showroom! Roller conveyors optional! Full automatic hydropneumatic operation · Mitre cuts left/right · Head angle cuts up to 45° (bevel) on both sides · Pneumatic vertical clamping device · Vices before and after the saw blade for burr-free cuts · Material hold-down roller · Integrated coolant spray system · Chip extraction nozzle on the saw blade guard · Single feed 530 mm · Section length min. 4 mm / max. 9,999 mm Use of our B & S Coolmatic Plus is mandatory for profile cutting. Iodpfx Ajd Iinyjdkjhw CNC Control: · With control keypad for over 90 different saw programs, with 99 sub-programs for length, quantity, and angle · Automatic feed unit, 2,000 mm via ball screw spindle Incremental feed with automatic length compensation. Adjustable for section lengths from 25 to 9,999 mm. · Fully hydraulic control of the saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire work process with user-friendly data entry

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90° (round): 120 mm Cutting range at 90° (square): 105 mm Cutting range at 90° (flat): 180 x 70 mm Cutting range at 45° (round): 120/110 mm Cutting range at 45° (square): 10/95 mm Cutting range at 45° (flat): 135 x 60 mm Motor: 2.5 kW Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Ihodpfxefg Rlgo Adkow Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m COBRA 352 NC 5.0, circular saw automatic machine with semi-automatic function, for sawing aluminium and light metal alloys, designed for use with carbide-tipped circular saw blades. Machine suitable for mitre cuts from 45° right to 45° left. The vertical axis alignment allows for sawing operations with the head inclined from 0° up to 45° to the left. Numerically controlled circular sawing machine equipped with a new Windows CE-based control system, specially developed by MEP for automatic machines.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 4000 S PLUS Full Otomatik Servo Motorlu Çift Köşe Alüminyum Pvc Kesim Makinası, • Fully automatic cutting machine designed for cutting PVC and aluminium profiles, both straight and at angles, using a double-head Ø600 mm saw. • Hydro-pneumatic saw movement with hydro-check control • Cutting accuracy of +/- 0.1 mm • High precision thanks to backlash-free gearbox Iedpfx Adoramy Tjkjhw • Automatic adjustment to two internal angles at 90° and 45° • 15" Windows-based industrial PC • Diamond-tipped saw blades 2 x Ø600 mm • Servo motor drive system • Saw blade projection distance: 215 mm; profile cutting capacity: 70 mm x 3 profiles • Hydro-check saw speed adjustment • 9.5 metre cutting capacity • 90° block slicing feature • Multi-language support • Conveyor profile support unit • Motion-sensitive support arm • Profile support unit between cutting heads • Spray-type saw cooling system • 2 vertical clamps • 4 horizontal clamps OPTIONAL • Barcode printer • Transfer of cutting lists via USB flash drive

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 403 Alüminyum Pvc Kesim Makinası, • V skladu s standardi CE. • Namenjen za rezanje aluminijastih in PVC profilov. • Hidro-pnevmatsko rezanje. • Prilagoditev hitrosti rezanja glede na profil. • Možno rezanje pod fiksnimi koti desno in levo: -60, -45, -30, -22,5, -15, 0, +15, +22,5, +30, +45, +60 stopinj. • Pnevmatski vertikalni in horizontalni stiskalec. Iodpfx Adjramrzjkohw • Aluminijasta žaga z diamantno konico Ø600 ali Ø650 mm. • Na voljo valjčni transporter (3 metre desno in levo). • Sistem za pršenje olja. • Natančno rezanje zahvaljujoč 3 kW motorju in Hydro-check systemu. • Možnost dela z digitalnim merilcem.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: G90230201, premer žaginega lista: 350 mm, skupna dolžina: 1.500 mm, skupna širina: 970 mm, skupna višina: 1.400 mm, največja višina reza: 100 mm, skupna masa: 350 kg, hitrost žaginega lista: 3.000 obr/min, vhodna napetost: 400 V, Автоматична CNC управляема циркулярна машина за рязане и пробиване / нарязване на резби на алуминий. Tronzadoras MG - GAA-350-90+CNC+TR12 • Автоматичен цикъл. • Подавател с ход на винтова шпилка, 700 mm. • OMRON контролер. • 10 програми с по 30 реда. • Памет за 20 изделия. • Аварийно спиране. • Регулируеми скорости на подаване и рязане. Ihodpfx Asvl Eahodkow • Автоматично настройване на дължината на рязане с многократни подавания. • Рязане под 90º. • Автоматично въздушно-маслено охлаждане. • Полуавтоматичен или напълно автоматичен режим на работа. Машината е инспектирана, сервизирана и готова за работа.