Mobilne odsesovalne naprave nakup rabljenega (170)

Stanje: novo, Description: Vacomat 140/160 XPe - The mobile dust extractor Vacomat 140/160 XPe is our smallest model and is ideal for single-machine extraction. Airflows of up to 1,593 m³/h can be conveyed using this negative pressure extraction system, e.g. for the extraction of panel saws, jointers, or thickness planers. - In the standard configuration, extraction is started manually at the touch of a button. Upon request, an automatic start of the fan can be installed so that extraction begins as soon as the connected processing machine is switched on. This prevents forgetting to activate extraction or unnecessary idling. - The dust and chip mixture is discharged into a dust-tight chip collection container (240 l) fitted with a plastic liner. A vacuum channel securely holds the plastic bag inside the collection container. Viewing windows make it easy to monitor the fill level. - The mobile extractor Vacomat 140/160 XPe automatically monitors its extraction performance via a pressure sensor and ensures maximum operational safety. Filter Cleaning - On the Vacomat 140/160 XPe, an integrated control panel activates an electric/mechanical shaking motor to clean the filter sleeves. Control is managed via feedback from the woodworking machine using potential-free contacts. Once all connected machines are switched off, the filter shaking process starts automatically. Kjdpfx Ajvwflnoh Dsdu For this regeneration mechanism, no compressed air connection and thus no compressor is required. As a result, noise levels are significantly reduced during cleaning. - For very high and especially fine dust levels, an efficient pulse-jet filter cleaning option (XPe-D) is recommended (NOTE: Overall height +100 mm, length +280 mm). Filter cleaning using the compressed air tank is performed offline, after the extraction process. SCHUKOCONE FILTER - The mobile dust extractor Vacomat 140/160 XPe is supplied as standard with patented SchukoCone® filter sleeves. - The SchukoCone® filter is an innovative combination of an outside-loaded filter sleeve with an inside-loaded cone. This filter design offers approximately 60% more filter area with a smaller footprint. - SchukoCone® filter sleeves fully demonstrate their potential especially for fine dusts, where large filter area and low filter load are crucial. - Lower filter load results in a longer filter service life. A lower filter resistance means less fan output and, consequently, reduced energy consumption. ASSEMBLY & DELIVERY SCOPE - Mobile dust extractors of type Vacomat 140/160 XPe are delivered pre-assembled and ready to plug in (3-phase, 16 A, with 6.0 m cable) on a disposable pallet (included). A chip collection bag (size V) is also included. - The Vacomat 140/160 XPe must be connected electronically to the machine to be extracted, so that automatic regeneration of the filter sleeves is triggered once the processing machine is shut down. A certified electrician can help with this. The supplied control panel with integrated phase inverter is prepared for a potential-free contact query and three current transformer coils (coils not included). - With a flexible hose or a fixed pipeline...

Stanje: pripravljen za uporabo (rabljen), working dimensions 2000x900mm height 840mm 2 feed drawers Kdodev Tninspfx Ah Deu manual filter cleaning power supply 380V

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Year of manufacture: 1997 Airflow rate: 2950 m³/h 200 mm suction port Kdodev A Rv Ajpfx Ah Dou Motor: 3.7 kW, 400 V Technically in very good condition

Stanje: novo, New machine Mobile Extraction Unit Dimensions and Weights: Length (product): approx. 1000 mm Width/Depth (product): approx. 500 mm Height (product): approx. 2100 mm Net weight: approx. 39 kg Chip collection volume: 110 l Nominal outside diameter, extraction port (inlet): 203 mm Nominal outside diameter, extraction port (outlet): 1 x 100 mm, 1 x 120 mm Electrical Data: No-load speed: 2950 rpm Supply voltage: 230 V Mains frequency: 50 Hz Power consumption: 1.5 kW Output power: 1.05 kW Filter: Filter area: 1.92 m² Kdodswb Ehpjpfx Ah Dju Noise Emission: Max. sound pressure level: 85.7 dB(A) Airflow: Nominal air flow: 1900 m³/h Max. negative pressure: 1700 Pa Scope of Delivery: Extraction unit, fine filter bag, chip bag Availability: short notice Stock location: Hochheim

Stanje: rabljeno, Leto izdelave: 2022, številka stroja/vozila: 515, New exhibition machine!! List price €9,854 net Designed for extracting individual dust sources; suitable for installation in the workspace, but only outside of potentially explosive areas. Key design features: - Galvanized sheet steel construction - Space-saving compact design - Delivered ready for operation - ATEX—pressure surge resistance, FSA tested - Low energy consumption with high performance, thanks to clean-air side high-performance fan with special impeller - Energy-saving motor, efficiency class IE2/Eff1 - Two large-capacity collection bins, with insert bags - Collection volume: 400 l - High operational safety and long filter life with BGIA-tested filter bags - Motorized filter cleaning device with automatic control and run-time addition - Alpha control unit with automatic start (sliding gate control available at extra cost) - Connection cable, 5 m long, with plug - Manufactured in accordance with DIN 8416 - Residual dust content in exhaust air less than 0.1 mg/m3 - GS-HO-14 GS – H3 certification passed Scope of delivery: - Filter bags, externally loaded, permeability < 0.5% (BGIA) - Energy-saving motor, efficiency class IE3 - Two large, mobile collection bins - Mitsubishi Alpha control unit with automatic start (connect up to six I-coils) and run-time addition - Input for external shut-off signal (limit switch, etc.) - Automatic vibration cleaning - GS wood dust tested – H 3 Vacumobil VT 200 – ø 200 mm, 4.0 kW, 400 V, 50 Hz Kdjdpfjwt Hadjx Ah Dju ----- Technical data: Intake nozzle arrangement: left Nominal air flow: 2260 m3/h Max. air flow: 3400 m3/h Pressure difference at: - Nominal air flow: 2900 Pa *) - Max. air flow: 2100 Pa *) Filter area: 12.05 m2 Intake diameter: 200 mm Intake height (approx.): 1500 mm (centered) Fan motor: 4.00 kW, 3x400 V, 50 Hz, IE 3 Shaker motor: 0.12 kW, 3x400 V, 50 Hz, II 3D Upstream fuse: 20 A (by customer) Sound pressure level: 71.0 dB(A) Weight (approx.): 425 kg Dimensions (L x W x H): 2012 x 1012 x 1990 mm *) Average values The negative pressure achieved at the connection point with filtered air depends on the extracted material and fine dust content. ATTENTION: 1. Automatic slide gates are mandatory when purchasing a new extraction system! 2. An air measurement is required after installation of the extraction system!

Stanje: novo, Clean Air Extraction Unit SCHUKO Vacomat 140/160 XPe - Exhibition Model - Motorized filter system, mobile, extraction port can be mounted on either the right or left side ----- Technical Data ----- Kjdpfxeu R Szyj Ah Dedu Certification: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal airflow: 1,447 m³/h, Max. negative pressure: 2,200 Pa, Filter surface area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 - New exhibition machine -

Stanje: rabljeno, Leto izdelave: 2008, without briquetting press Filter area 32 m² with hopper transition to container or connection to rotary valve Used, excellent condition, low operating hours Manufacturer: Schuko Model: Vacomat 300 Year of manufacture: 2008 Kjdpsvxlqmjfx Ah Dodu Clean air unit / negative pressure GS dust-tested, BIA-certified CE type-certified Motor: 7.5 kW Connection diameter: 300 mm Pressure (Pa): 3090 Air flow rate: 5,800 m³/h Control panel Filter pressure monitor Extinguishing system: powder extinguisher New price approx. €17,000.00 Space requirement approx. 3,600 x 1,590 x 2,550 mm / 4,400 mm without hopper Location: 97447 Gerolzhofen, free loaded, unpacked Handover in current condition as inspected, without guarantee or warranty

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, working dimensions 2000x1000mm Kdedpovkpnmefx Ah Dsu 2 feed drawers pneumatic shaking total power 1.5kW supply voltage 400V hinged wall

Stanje: dober (rabljeno), Leto izdelave: 2003, Paint spraying unit with heat exchanger and blower for drying was used in the production of stairs and joinery components. Kedpfx Ajuyy A Deh Dedu Spray booth wall also features a floor extraction system with a total length of approximately 7 meters, equipped with three extraction fans.

Stanje: rabljeno, used extraction components Pipes in standard sizes from 80 to 350 mm Branches from 80-80-80 up to 350-350-350 Bends 22.5°, 45°, and 90° electric slide valves pneumatic slide valves control units special components of all kinds Kdjdpfontcu Sjx Ah Deu If you are interested in an offer, please provide us with your detailed specifications. Availability: immediate Location: Hochheim

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 2-Bag Sawdust Extractor 2.2 kW Specification: • Condition: used, after inspection • Turbine motor power: 2.2 kW • Turbine inlet diameter: 200 mm • Collection bag diameter: 2 x 500 mm • 2 x filter bag (dimensions: 500 x 1200 mm) • Capacity: approx. 3,900 m3/h • Overall dimensions: 170 x 70 x 250 cm (L x W x H) Ksdpfxownx Rko Ah Dedu Additional information: • Very good technical and visual condition, factory standard • The presented photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Stanje: novo, Leto izdelave: 2025, Clean Air Dust Extractor AL-KO APU 300 P Technical Data 300-P Suction nozzle: 300 mm Rated motor power: 7.5 kW / 3 ph Voltage: 400 V / 50 Hz Max. air flow: 6,000 m³/h Rated air flow: 5,089 m³/h Vacuum: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 165 L Dimensions (L / W / H) in mm: 2,963 x 994 x 2,346 Weight: 880 kg Kdsdpfjrrw Tbsx Ah Dou Delivery time on request

Stanje: novo, Exhibition machine Type A according to DIN EN 16770:2018 Without fire extinguishing system, tested in accordance with GS-HO-07 test principles of the BGHM. The dust extractor is a mobile extraction and filtration unit for industrial applications, designed for placement in the work area. The dust extractor is suitable for collecting, conveying, and separating dry wood, paper, or plastic chips and dust at various processing machines. Comprising a vacuum-resistant housing with suction nozzle and non-return flap, antistatic filter elements with jet-pulse cleaning, a high-performance radial fan with three-phase motor (energy efficiency class IE3) located on the clean air side, as well as integrated exhaust silencing and air outlet grille. Equipped with 2 swivel and 2 fixed castors, 2 chip containers with collection bags, and a control system with 5 m connection cable and CEE appliance plug. The control system is designed for automatic operation. Automatic start control for up to 6 machines and automatic filter cleaning with runtime extension are included. For automatic startup, either monitoring coils or volt-free machine contacts can be used. Single-coat PVC paint finish in RAL 9006 (white aluminum). Delivery in fully assembled, ready-to-operate condition. For filter cleaning, adequately prepared compressed air must be provided on-site (connection via plug nipple NW 7 / 6 bar). Technical data: Suction nozzle: Ø 250 mm Residual dust content: < 0.1 mg/m³ H3 Filter area: 21 m² Cleaning: Offline - compressed air jet pulse Compressed air supply: 6 bar (connection via plug nipple NW 7) Airflow: 4,500 m³/h Rated airflow (at 20 m/s at the suction nozzle): 3,530 m³/h Negative pressure (at suction nozzle, rated airflow): 2,700 Pa Sound pressure level MAX (distance to unit 1m): 67 dB (A) Fan motor: 5.5 kW, 230/400 V, 50 Hz, 3,000 rpm, IP 54 Operating mode: continuous, intermittent Collection drum volume: 2 x 165 l Dimensions (L x W x H): 2,130 (2,540) x 900 x 1,962 mm Weight: approx. 705 kg Accessories: 1 frequency converter 5.5 kW for the fan of the SMU dust extractor, manufacturer Eaton (Item no. 114004) with control integrated into the dust extractor’s control panel to maintain constant airflow during filter saturation, including safe fan shutdown during filter cleaning. Individual adjustment of suction pressure / airflow as required. The converter increases system efficiency, saves energy, and reduces wear on materials and machinery. Technical features: - Motor rating 5.5 kW, - Integrated PID controller, - Automatic energy optimization, - Integrated manual/automatic changeover, - Commissioning menu for rapid parameter setup, - Integrated radio interference filter according to EN 55011-1B, - Synchronization with freely rotating motor shaft, - Including pressure transducer 0-50 mbar (pressure cell). 1 slide valve control for 1 – 8 processing machines (Item no. 113197) Kdedpfx Aevwfu Njh Deu Activation of up to 8 electro-pneumatic shut-off valves in the extraction ductwork at the respective processing machines, triggered by volt-free contacts or monitoring coils on the machines. 8 monitoring coils STWA1 (Item no. 600668) for contact monitoring at the processing machines, suitable for all STW types.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, filtrirna površina: 13,5 m², negativen tlak: 2.450 Pa, skupna višina: 2.125 mm, skupna širina: 870 mm, skupna dolžina: 2.045 mm, skupna masa: 340 kg, nazivni pretok: 1.832 m³/h, vhodna napetost: 400 V, moč: 3 kW (4,08 KM), vrtljajska hitrost (min.): 2.865 obr/min, vhodna frekvenca: 50 Hz, Schuko dust extractor/vacuum Vacomat 180 X Pe, in good condition. Ksdpfx Ahsv Iam Is Dsdu

Leto izdelave: 1994, Stanje: zelo dobro (rabljeno), Mobile extraction unit Scheppach HA 3200 Kjdpfx Aheghrvxj Dedu

Stanje: novo, Tip DC9030 Kdedpfxsfiiwue Ah Dsu Pretok zraka: 3900 m³/h Premer priključka: 3×100 mm Premer ventilatorja: 300 mm Kapaciteta vreče: 307 l Vreča zbiralnika: ø 480 × 4 3-fazni Moč motorja: 2,2 kW Teža: 63 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna višina: 2.720 mm, skupna širina: 750 mm, skupna dolžina: 1.650 mm, premer sesalne cevi: 250 mm, BOLMAR MC2 Chip Extractor 4.0 kW Specification: • Condition – brand new • Manufacturer – BOLMAR • Model – MC2 • Turbine motor power – 4.0 kW • Turbine inlet – 250 mm dia. Kdjdstq Eiwepfx Ah Dju • Filter surface area – 5.4 m² • Capacity – 6,900 m³/h • Noise emission – 89.5 dBA • Collection bag diameter – 2 x 600 mm • Weight – 95 kg • Overall dimensions – 165 x 75 x 272 cm (L x W x H) Additional information: • Machine is brand new, never used • The photos shown depict the actual condition of the item for sale • Possibility of connecting and testing the device on site • The price listed in the auction does not include VAT

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Europac Filter System EP 704 DS Year of manufacture: 2013 S/n 1340 2 filter bags, diameter 660 mm Extraction capacity approx. 5,100 m³/h Filtration efficiency: 1 micron Motor power: 7.5 kW, three-phase 400 V 50 Hz Noise level: 70–90 dB(A) Main outlet diameter: 250 mm Chip bags approx. 1.65 m³ Mobile platform (on castors) Protection class: IP 54 Dimensions: 2.0 m x 1.65 m Height: 3,060 mm Kedpfotp Su Nex Ah Dedu Weight: 300 kg Technical data subject to change.

Stanje: rabljeno, Leto izdelave: 1996, including control cabinet for motor start and 24 V shutter control used, in good condition Manufacturer: AL-KO Model: Mobil Jet 200 Year of manufacture: 1996 Clean air unit / negative pressure GS dust tested Motor: 3.0 kW Connection diameter: 200 mm Pressure: 1560 Pa Airflow rate: 2,780 m³/h Discharge drums: 2 pieces Pneumatic filter cleaning Pressure gauge Original price approx. €11,300.00 Space requirement: approx. 2000 mm x 1000 mm x 2200 mm Weight: approx. 500 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Handover in as-inspected condition, without guarantee or warranty Kdedpfx Aevwfgloh Dou

Stanje: novo, Tip DC-9052 Zračni pretok: 4.560 m³/h Premer vhodov: 4 x 100 mm / 1 x 180 mm Premer ventilatorja: 356 mm Kapaciteta vreče: 307 l Vreča za zbiranje: ø 480 × 4 Kjdpfx Asfiiwxoh Djdu 3-fazni, 400 V / 50 Hz Moč motorja: 5,6 kW Dimenzije: 2.764 x 585 x 2.355 mm Transportne dimenzije: 1.600 x 720 x 840 mm Teža: 125 kg