Sz Sägemaschinen-Zentrum Gesellschaft mbH

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, dolžina tračnega lista: 2.450 mm, PRODAM TRAČNO ŽAGO FMB PHOENIX, MALO RABLJENA..... Itsdpfxjxfauce Ah Djn

Stanje: novo, Cutting diameter: 180 mm Cutting capacity at 90°: square 180 x 180 mm Cutting capacity at 90°: flat 200 x 150 mm Cutting capacity at 45°: round 115 mm Cutting capacity at 45°: square 110 x 110 mm Cutting capacity at 45°: flat 125 x 110 mm Cutting capacity at 60°: flat 70 x 70 mm Cutting capacity at 60°: square 70 x 70 mm Cutting capacity at 60°: round 70 mm Blade speed range: 40 / 80 m/min Saw blade length: 2,130 x 20 x 0.9 mm Itedjxaa Tnopfx Ah Don Total power requirement: 0.75 kW Machine weight approx. 190 kg Equipment: - compact / robust manual band saw - with single-sided mitre device up to 60° to the left - hydraulic lowering of the saw bow * infinitely variable feed adjustment * automatic cut-off at end of cut - 2x saw blade speeds - saw blade guide with carbide plates - manual vice with quick-release - machine base - coolant system - manual saw blade tension (star grip at front) - 1x angle stop - 1x metal saw blade - operating manual

Stanje: novo, Cutting capacity at 90° (round): approx. 100 mm Cutting capacity at 45° (round): approx. 65.0 mm Cutting capacity at 90° (flat): 100 x 150 mm Cutting capacity at 45° (flat): 60 x 100 mm Saw blade dimensions: 1470 x 13.0 x 0.65 mm Voltage: 230 V Band speed: 45.0 m/min Weight: 26.0 kg Dimensions (L x W x H): 700 x 320 x 420 mm The mobile bandsaw EBS 100 C is the ideal machine for on-site installation work on construction sites. Its smooth and vibration-free operation enables precise cuts. SOLVES MANY SAWING PROBLEMS ON THE CONSTRUCTION SITE Dry cutting (no coolant required) - Outstanding price-performance ratio thanks to a wide range of applications - Includes workpiece stop for efficient operation - Adjustable saw bow for mitre cuts up to 45° - Ideal for construction site use due to its low weight - Standard version includes integrated chip collection container Isdpfx Ajxaa Apoh Dstn - Optimum cutting results due to ball-bearing saw blade guide - Quick-release vice included in delivery Scope of delivery - Saw blade - Workpiece stop - Quick-release vice - Ergonomic handle - Chip collection container

Stanje: novo, Cutting diameter: 120 mm Cutting capacity at 90° (flat): 120 x 102 mm Cutting capacity at 90° (square): 112 x 112 mm Cutting capacity at 45° (flat): 78 x 78 mm Cutting capacity at 45° (round): 80.0 mm Cutting capacity at 60° (flat): 50 x 43 mm Cutting capacity at 60° (round): 50.0 mm Cutting speed: 35 – 80 m/min Saw blade length: 1440 x 13.0 x 0.65 mm Voltage: 230 V Motor power: 1300 Watt Weight: 18.0 kg Dimensions (L x W x H): 520 x 400 x 900 mm Portable metal bandsaw for cuts from 0° to 60° Dry cutting (no coolant) Up to 60% faster cutting compared to conventional bandsaws thanks to the NG system with reverse rotation of the saw blade. - Dry cutting (no coolant) - Innovative, coupled blade tensioner for monitoring and adjusting correct blade tension - Steel vice with prism guide - Powerful 1300 W motor - "Constant Speed" variable speed control with current limiter Isdpfx Ahoxaawts Detn - Sturdy, robust frame made from formed steel - Bow locking device for easy transport Included accessories: - Adjustable length stop, 500 mm - Detailed operating instructions & maintenance manual - Circuit diagrams and exploded drawings - Saw blade for pipes and profiles

Stanje: novo, Robust double-mitre metal bandsaw designed for professional use in metal fabrication and container construction, featuring hydraulic lowering of the saw bow. Technical Data: Cutting capacity: 0° round: 315 mm 0° square: 270 mm 0° rectangular: 250 x 400 mm 45° round: 280 mm 45° square: 280 mm 45° rectangular: 300 x 280 mm 60° round: 180 mm 60° square: 140 mm 60° rectangular: 140 x 180 mm -45° round: 250 mm -45° square: 220 mm -45° rectangular: 280 x 200 mm Cutting speed: 35 / 70 m/min Saw blade: 3460 x 34 x 1.1 mm Working table height: 970 mm Isdpow Hxapjfx Ah Detn Motor power: 2.2 kW Coolant pump motor: 100 W Dimensions (approx.): 2270 x 970 x 1140 mm Weight (approx.): 580 kg Features: - Double-mitre saw with swivel saw bow from left -45° to right +45° - Ideal for cutting pipes, profiles, and solid materials made from stainless steel, iron, etc. for commercial applications - Generously sized cast saw arm for vibration-free operation - Two cutting speeds for optimal adjustment to the workpiece - Hydraulic lowering cylinder - Quick-release vice for fast and easy clamping - Precision-adjustable saw band guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bi-metal saw blade 3460 x 34 x 1.1 mm - Blade tension adjustable via manometer - Carbide guides - Quick-release vice - Workpiece stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Piła taśmowa do metalu o optymalnym zakresie cięcia, powszechnie stosowana w zakładach stolarskich, produkcyjnych oraz rzemieślniczych. Opis maszyny CORMAK BS 128HDRC to piła taśmowa do metalu o optymalnym zakresie cięcia, przeznaczona dla profesjonalistów, wyróżniająca się wydajnością i łatwością obsługi. Obracane ramię w obu kierunkach to istotna zaleta podczas cięcia pod kątem. Mimo niewielkich gabarytów, duża masa własna (103 kg) zapewnia stabilność i brak drgań podczas cięcia większych elementów. Cięty element może być podawany ręcznie lub przez podajnik. Posuw grawitacyjny z przepływem oleju w dwukomorowym siłowniku hydraulicznym. Sterowanie opuszczaniem ramienia odbywa się przez zawór regulujący przepływ oleju między komorami siłownika. Za precyzyjne prowadzenie taśmy odpowiada zestaw łożysk prowadzących. Maszyny wyposażone są w wyłącznik krańcowy i wyłącznik główny zgodne z IP54. Przegubowe ramię piły umożliwia cięcie dwustronne w zakresie -45° do +60°. Dane techniczne: Wymiary taśmy tnącej: 1640×13×0,65 mm Prędkość cięcia: 23/34/54 m/min Moc: 0,55 kW/400V Sterowanie opuszczaniem ramienia: płynne, siłownik hydrauliczny Zakres cięcia: -45° – +60° Wymiary: 942×442×548 mm Waga: 103 kg Maksymalny zakres cięcia [mm]: Kąt 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm Itsdpfx Aowq A Dysh Djn +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Wyposażenie standardowe: - Siłownik hydrauliczny 3. generacji - Stół do cięć pionowych - Szybkomocujący imadło - System chłodzenia time ogranicznik materiału time wyłączniki krańcowe automatyczne time zabezpieczenie termiczne silnika time mobilna podstawa na czterech kołach time instrukcja obsługi Cena podana jest ceną netto. Do ceny nie doliczono kosztów wysyłki. Po więcej informacji zapraszamy do kontaktu telefonicznego lub mailowego. Szczegóły i pełna oferta dostępne na naszej stronie internetowej.

Stanje: rabljeno, Leto izdelave: 2002, Cutting diameter: 210 mm Cutting capacity at 90° (flat): 270 x 200 mm Cutting capacity at 90° (square): 200 mm Cutting capacity at 45° (round): 180 mm Cutting capacity at 45° (flat): 180 x 190 mm Cutting capacity at 45° (square): 180 mm Vice width: 200 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2750 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Iedowkvqtjpfx Ah Dotn Machine weight: approx. 0.35 t Space requirement: approx. 0.95 x 1.7 x 1.9 m Bandsaw machine equipped with: - Cut-control system - Double mitre facility, 45° right and left - Mitre facility adjustable via turntable - Coolant system

Stanje: novo, Cutting diameter: 315 mm Bandsaw blade dimensions: 3460 x 1.1 x 34 mm Cutting speed: 35 / 70 m/min Cutting width: 400 x 250 mm Iodpfx Ajwfyq Teh Djtn Cutting capacity at 45°, round: 250 / 280 mm Cutting capacity at 45°, square: 220 / 280 mm Cutting capacity at 60°, round: 180 mm Cutting capacity at 60°, square: 140 mm Connection voltage: 400 V Total power requirement: 2.2 kW Machine weight: approx. 0.6 t Dimensions (L x W x H): 2.1 x 1.0 x 1.5 m Mitre bandsaw - Mitre cuts up to 45° left and right - Mitre cuts up to 60° right - Vice with quick-release device - Blade tension monitored via manometer - Electric coolant system

Stanje: novo, Leto izdelave: 2025, Optimum Gear-Metal Bandsaw OPTIsaw SD 200V For Demanding Sawing Applications Item number: 3300205 DESCRIPTION - Quiet operation - Robust cast construction - Steplessly adjustable bow descent via hydraulic cylinder with throttle valve - Microswitch for automatic cutoff at end position - Clearly legible scale for angle adjustment - Supplied as standard with high-quality bimetal saw blade - Saw blade tension adjustable from the front by handwheel - Ball-bearing saw blade guide - Sturdy machine base with large wheels and a convenient transport handle for easy relocation of the machine - Adjustable material stop for series cuts - Safety switch for saw blade cover - Fully equipped, allowing the user to start productive work immediately after commissioning TECHNICAL DATA Dimensions and Weights Length (product) approx.: 1382 mm Width without material stop approx.: 434 mm Width/depth (product) approx.: 533 mm Width with material stop approx.: 533 mm Height (product) approx.: 1200 mm Height lower end position approx.: 790 mm Height upper end position approx.: 1200 mm Net weight approx.: 130 kg Worktable height: 530 mm Electrical Data Drive motor power: 0.75 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 100 W Machine Data Saw blade speed: 26 – 80 m/min Isdpfev Sg T Nex Ah Dstn Saw blade length: 2360 mm Saw blade width: 19 mm Saw blade thickness: 0.9 mm Mitre angle: 0 – 45° Feed: Steplessly adjustable Raising of saw bow: Manual Cutting Capacity Cutting range 0° round (solid): 180 mm Cutting range 0° square (solid): 180 mm Cutting range 0° rectangle vertical (solid): 180 x 240 mm / 50 x 300 mm Cutting range +45° round (solid): 110 mm Cutting range +45° square (solid): 150 mm Cutting range +45° rectangle vertical (solid): 110 x 170 mm SCOPE OF DELIVERY Material stop Bimetal saw blade Machine base

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, dolžina tračnega lista: 3.850 mm, širina tračne žage: 27 mm, skupna višina: 9 mm, hitrost rezanja: 25 mm/min, moč: 2,2 kW (2,99 KM), Model tračne žage Karmetal DDG 300X340 ENC, izdelana leta 2023, omogoča močno in natančno rezanje za industrijsko uporabo. Zaradi visoko učinkovitega motorja in nastavljive hitrosti rezanja je idealen pomočnik v kovinsko-predelovalni industriji. ✅ Znamka: Karmetal ✅ Model: DDG 300X340 ENC ✅ Leto izdelave: 2023 ✅ Hitrost rezanja: 25 – 90 m/min ✅ Glavna moč motorja: 2,2 kW ✅ Hidravlični motor: 0,37 kW – 1400 vrt/min ✅ Motor za hlajenje: 0,09 / 0,12 kW – 2800 vrt/min Itodpfx Ajv Hdu Toh Dsn ✅ Dimenzije tračnega lista: 3850x27x0,9 mm ✅ Glavna napetost: 3x400V, 50-60 Hz

Stanje: kot nova (razstavni stroj), Metal band saw demonstration unit MBS210FH Itsdpfx Aevrvupsh Djn with smooth-action hydraulics, automatic cut-off, electric coolant system, quick-release vise, base frame, CE certified, 169kg; Sample image Price subject to change; errors, misprints, and typographical mistakes excepted.

Stanje: novo, Cutting capacity at 90 degrees (round): 125 mm Cutting capacity at 90 degrees (square): 125 mm Cutting capacity at 90 degrees (rectangular): 127 x 125 mm Saw blade dimensions: 1435 x 12.7 x 0.65 mm Blade speed: 38 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Dimensions (L x W x H): 720 x 380 x 450 mm Both straight and mitre cuts can be performed at angles between 45 and 90 degrees. With the metal band saw you will work not only precisely, but also quickly: the blade speed can be variably adjusted between 38 and 80 meters per minute. Itsdpfx Ajupw R Nsh Djn Weighing only 25 kilograms, the saw is mobile and can be used on site.

Stanje: novo, Cutting range at 90 degrees: round 130 mm Cutting range at 90 degrees: square 127 x 127 mm Saw blade dimensions: 1140 x 13 x 0.65 mm Band speed max.: 144 m/min Total power requirement: 1.1 kW Machine weight approx. 15 kg Dimensions (L x W x H): 500 x 300 x 400 mm Portable and detachable metal bandsaw Features: Powerful 1100-watt motor. Itedpfx Ahjupw N Ee Den Includes 2 saw blades, work table, and integrated LED lighting. Equipped with an adjustable variable handle. Lightweight and easy to handle. Suitable for universal applications in the workshop, on construction sites, or for private use.

Stanje: novo, Leto izdelave: 2025, Cutting diameter 335 mm Saw blade length 4400 x 34 x 1.1 mm Table height 750 mm Feed 5 - 2300 mm per stroke Cutting area at 90 degrees: flat 500 x 335 mm Cutting area at 45 degrees: round 330 mm Cutting area at 45 degrees: flat 320 x 335 mm Cutting area at 45 degrees: round left 305 mm Cutting area at 45 degrees: flat left 305 x 335 mm Cutting area at 30 degrees: round 180 mm Cutting area at 30 degrees: flat 170 x 335 mm Cutting speed 15 - 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2,550 kg Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - Safety system according to CE standards using light barrier - Proven MEBA double-column linear bandsaw design with integrated MEBA gripper feed system, stroke length 5 - 2300 mm - MEBA - Visualized program entry with CNC control Fully automatic operation with freely selectable angles between 30° - 135°, length and quantity. Simplified program creation and management for up to 255 programs. The operator enters the sawing tasks via a cut diagram display panel. Input errors are minimized, allowing simple and reliable production order creation by different operators. - MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring, guaranteeing optimal conditions for each cutting job: constant pressure for solid material, constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive, max. stroke length 2300 mm with integrated roller conveyor up to 3000 mm. - Dual-sided opening of the gripper jaws on the feed system. Ribbed inserts for heavy material transport. - Saw frame made from solid, vibration-damping steel welded construction. - Saw band inclined by 3° relative to the material support surface, ensuring top cutting performance and life span when sawing steel construction profiles. - Combined saw band guides, precision bearings for gentle saw band redirection. Beveled carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection of the saw band and the fixed clamping jaw; thus, there is no change in cutting length when the angle changes. The cutting kerf width is automatically compensated at each angle position. - NC miter angle programming. Control panel is always free-standing for these systems. - Patented double miter clamping system (ERP No.), automatic positioning of clamping jaws. The clamping device automatically moves along with the material, according to the desired mitre, ensuring material is always clamped squarely and close to the saw band. Material clamping is performed using full stroke cylinders. - Rapid-lowering of the saw frame via automatic height selection just above the workpiece. In serial cutting, the saw frame travels just above the material, allowing the next workpiece section to be positioned. Optimal cycle times for both single and serial cutting. - AC frequency-controlled saw band drive, continuously adjustable from 15 - 150 m/min Itjdpfx Ahoulnb Ds Don - Backlash-free, preloaded, low-maintenance linear ball guides for material feed and saw frame feed, ensuring smooth and jerk-free operation.

Stanje: novo, Leto izdelave: 2025, CORMAK HBS260 Bandsaw for cutting pipes, profiles, and bars is widely used in all metalworking shops where precision, quality, and cutting speed are essential. The model features a swiveling arm from 0° to 60°. The robust frame ensures accurate and quiet operation. Equipped with a removable chip tray for easy cleaning! Machine Features The CORMAK HBS260 horizontal metal bandsaw with a swiveling arm allows cutting perpendicular to the axis of the material as well as at any angle between 0° and 60°. Material feeding can be done manually or with any mechanical device, while the blade feed is automatic. The blade guides are fitted with special carbide pads and bearings, significantly improving blade guidance, lifespan, straightness, precision, and quality of cut. Carbide guidance greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed-circuit system. The saw head is made from a single cast iron piece, and the 27 mm wide saw blade enables high-volume cutting of both profiles and solid materials. The vice is placed in an adjustable bed and comes with a quick-release clamp. The blade guides feature carbide pads and roller bearing systems – it is these CARBIDE GUIDES that are responsible for cutting precision and straightness. The upper part of the base is designed as a tray for draining coolant and capturing chips generated during cutting. The cast iron worktable with the swiveling arm and control panel on a separate arm is mounted to the base. During operation, the primary cutting motion is the movement of the blade, while the feed is achieved by the arm descending. The descent speed (cutting speed) is controlled via a hydraulic cylinder. Feed rate is adjustable from the operator’s panel. There are two selectable blade speeds: 35 and 70 m/min. When the arm reaches the bottom position (after the cut is complete), the blade drive is switched off automatically. Safety features include blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional safety is ensured by automatic shut-off in the event of blade breakage. Technical Data Blade size [mm]: 2500 x 27 x 0.9 Manual (mechanical) blade tension Blade speeds [m/min]: 35, 70 Stepless arm descent regulation – hydraulic cylinder Vice base height [mm]: 860 Saw wheel diameter [mm]: 300 Saw frame swivel [°]: 0-60 Power supply: 3-phase 400V Main motor power [kW]: 1.1/1.5 Coolant pump motor power [kW]: 0.05 Machine dimensions with base [cm]: 150x80x140 Weight [kg] gross/net: 210 / 180 Extras included: Itjdpfx Ahsudi Uze Den 2 x M42 bi-metal saw blades 5L Emulgol coolant ZW580 magnetic chip collector

Stanje: novo, Leto izdelave: 2025, CORMAK HBS275 Bandsaw for cutting pipes, profiles, and bars is widely used in all metalworking shops where precision, quality, and cutting speed matter. This model features a swiveling arm (0-60°), and the blade guides are carbide-based. The frame design ensures accurate and quiet operation. Machine Features This horizontal metal bandsaw with a swiveling arm allows cutting at right angles to the material axis as well as at any angle from 0 to 60°. Materials can be fed manually or using any mechanical device, while the tool feed occurs automatically. The blade guides feature special carbide pads and bearings, significantly affecting blade guidance, longevity, straightness, and cutting accuracy and quality. Carbide guidance greatly reduces machine and blade wear. The machine is equipped with a high-efficiency coolant pump in a closed-loop cooling system. The saw arm is made from a single-piece cast iron and, combined with the 27 mm cutting band used in this model, enables full-volume batch cutting of profiles and solid materials. The vise is positioned on an adjustable bed and features a quick-release clamp. Blade guides are fitted with hard metal - carbide inserts and a rolling bearing system. It is precisely the CARBIDE BLADE GUIDES that ensure cut precision and straightness. The arm features an automatic blade tension sensor and is inclined at 25 degrees to increase blade longevity. A cleaning brush is mounted under the arm to keep the blade clean and in optimal condition. Machine drive is transmitted via a worm gear. A cast iron worktable is attached to the base with a swiveling arm and a control panel on a separate arm. During the cutting process, the main cutting motion is the movement of the cutting band, with the feed movement provided by the descent of the arm. The descent speed of the arm (cutting speed) is controlled via a hydraulic cylinder. Feed speed is adjusted from the saw's control panel. Two cutting band speeds are available: 37.5 and 75 m/min. When the arm reaches its lowest position (after cutting), the cutting band drive is switched off automatically. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle is completed or any guard is opened; there is an additional safety feature that automatically stops the saw in case the band breaks. The drive is transmitted via a motor with a worm gear. Itsdpfx Aheudi Une Djn The motor is equipped with a thermal fuse to protect against overheating during operation. Technical data TOTAL POWER: 1.5 kW SUPPLY: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE DIMENSIONS: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VISE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (ARM UP) (L x W x H): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cutting Capacity ANGLE Round [mm] Rectangular [mm] Square [mm] 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100 The price does not apply to machines purchased in Poland.

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 27 x 0.9 mm Table height: 950 mm Cutting speed: 18–110 m/min Cutting diameter: 255 mm Cutting capacity at 90° (square): 240 mm Cutting capacity at 90° (flat): 300 x 180 mm Cutting capacity at 45° (round): 210 mm Cutting capacity at 45° (square): 190 mm Cutting capacity at 45° (flat): 200 x 160 mm Cutting capacity at 60° (round): 135 mm Cutting capacity at 60° (square): 110 mm Cutting capacity at 60° (flat): 130 x 100 mm Cutting capacity at 45° right (round): 180 mm Iedpst I D Tusfx Ah Djtn Cutting capacity at 45° right (square): 160 mm Cutting capacity at 45° right (flat): 180 x 100 mm Total power requirement: 1.5/1.8 kW Machine weight approx.: 350 kg Space requirement approx.: 1700 x 900 x 2000 mm Manufacturer no.: 20437 Description: - Mitre cuts left 60° and right 45° - Quick-action vice, adjustable in T-slot for fast repositioning - Hydraulic brake cylinder - Large, ball-bearing turntable for easy mitre adjustment (durable) - Chip removal brush - Machine base with automatic cooling system - Lockable main switch, separate emergency stop - EMC (Electromagnetic Compatibility), UVV (Accident Prevention Regulation) - Current consumption display (indicates saw band wear, tool monitoring) - Automatic increased power output with the proven Berg & Schmid 3-stage AutoCut system

Stanje: rabljeno, Horizontal Mitre Band Saw KNUTH with Minimum Quantity Lubrication, Model HB 250A Metalworking bandsaw with pivoting saw bow. Serial No. 201603004 Year of manufacture: 2016 Cutting capacity at 90° round: Ø 225 mm Cutting capacity at 90° square: 190 x 190 mm Cutting capacity at 90° rectangle: 245 x 150 mm Cutting capacity at 45° round: Ø 145 mm Cutting capacity at 45° square: 145 x 145 mm Cutting capacity at 45° rectangle: 200 x 145 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 x 90 mm Cutting capacity at 60° rectangle: 110 x 70 mm Saw blade: 2480 x 27 x 0.9 mm Wheel diameter: 290 mm Blade speed: 45 / 90 m/min Compressed air requirement: approx. 5 bar (minimum quantity lubrication) Working height: 910 mm Motor power: 1.1 kW Connection: 400 Volt, 50 Hz - Two-stage electric motor for blade speed selection - Stepless lowering adjustment via hydraulic cylinder - Automatic shut-off after cut completion - Saw bow infinitely adjustable for mitre cuts up to 60° - Manometer for blade tension - Vice with quick-release short stroke clamping system Isdsrvm Npspfx Ah Djtn - Coolant system with electric pump - Minimum quantity lubrication UNI-Microspray I (year: 2017) - Workpiece stop Space requirement (L x W x H): 1450 x 700 x 1450 mm Weight: 185 kg Excellent condition

Stanje: novo, Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. for industrial applications. Technical data: Cutting capacity: Round 0°: 235 mm Iedpfjqbr Suex Ah Djtn Square 0°: 200 x 200 mm Flat 0°: 280 x 190 mm Round 45° right: 190 mm Square 45° right: 170 x 170 mm Flat 45° right: 190 x 180 mm Round 60°: 120 mm Square 60°: 120 x 120 mm Flat 60°: 120 x 115 mm Round 45° left: 175 mm Square 45° left: 145 x 145 mm Cutting speed, stepless: 20 - 90 m/min Saw blade: 2645 x 27 x 0.9 mm Working height, approx.: 990 mm Coolant pump: 100 W Saw motor: 1.5 kW Connection: 230 V Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm Weight, approx.: 295 kg Features: - Double miter bandsaw with swiveling saw bow from left -45° to right +60° - Large cast iron saw arm for low-vibration operation - Stepless adjustable cutting speed for optimal adaptation to the workpiece - Hydraulic lowering cylinder, infinitely adjustable - Quick-release vise for fast and simple workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - CE/IEC compliant, German documentation and service Scope of delivery: - Bimetal saw blade - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vise - Material stop - Coolant system incl. pump - Hydraulic lowering cylinder - Motor protection switch - Automatic cut-off at end of cut - Base frame

Stanje: novo, Cutting diameter: 235 mm Bandsaw blade dimensions: 2480 x 27 x 0.9 mm Cutting capacity (width): 280 x 190 mm Cutting speed: 45/90 m/min Cutting capacity at 60°, round: 120 mm Cutting capacity at 60°, square: 120 mm Cutting capacity at 45°, round: 190 mm Cutting capacity at 45°, square: 170 mm Connection voltage: 400 Volt Total power requirement: 1.1 kW Machine weight: approx. 290 kg Dimensions (L x W x H): 1.2 x 0.8 x 1.2 m Double mitre bandsaw - Mitre cuts up to 60° to the left and 45° to the right Iodpfxep Scqys Ah Djtn - Vise with quick-release mechanism - Blade tension control - Electric coolant system

Stanje: novo, Cutting diameter: 250 mm Saw band length: 3150 x 27 x 0.9 mm Table height: 750 mm Cutting width: 170 x 310 mm Cutting speed: 25 - 90 m/min Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Itodspam E Rspfx Ah Den Cutting capacity at 45° round: 205 mm Cutting capacity at 45° square: 205 mm Connection voltage: 400 Volt Total power requirement: 1.5 kW Machine weight: approx. 0.5 t Dimensions (L x W x H): 0.95 x 1.16 x 1.98 m Robust bandsaw - Double miter cuts: right up to 60°, left up to 45° - AutoCut function - Vice with quick-clamping device - Band tension control - Electric cooling system - Material stop max. 600 mm

Stanje: novo, Leto izdelave: 2025, Piła taśmowa do metalu o optymalnym zakresie cięcia, powszechnie stosowana w stolarstwie, zakładach produkcyjnych oraz rzemieślniczych. Opis maszyny Piła taśmowa do metalu CORMAK BS 128HDRC, charakteryzująca się optymalnym zakresem cięcia, przeznaczona dla profesjonalnych użytkowników, wyróżnia się wydajnością oraz łatwością obsługi. Dużym atutem jest możliwość obrotu ramienia w obu kierunkach, co znacząco ułatwia cięcie pod kątem. Pomimo niewielkich gabarytów, znaczna masa maszyny (103 kg) zapewnia wyjątkową stabilność i minimalizuje drgania podczas obróbki większych materiałów. Podawanie elementu do cięcia może odbywać się ręcznie lub za pomocą podajnika. Posuw w trakcie cięcia odbywa się grawitacyjnie przy udziale przepływu oleju w dwukomorowym siłowniku hydraulicznym. Kontrolę opuszczania ramienia umożliwia zawór sterujący przepływem oleju między komorami siłownika. Dokładne cięcie prostoliniowe zapewnia układ łożysk prowadzących taśmę. Maszyny wyposażone są w wyłącznik krańcowy oraz wyłącznik główny zgodny ze standardem IP54. Obrotowa rama piły umożliwia podwójne ukosowanie w zakresie od -45° do +60°. Dane techniczne Wymiary taśmy tnącej: 1640×13×0,65 mm Prędkość cięcia: 23/34/54 m/min Moc: 0,55 kW/230V Regulacja opuszczania ramienia: płynna, za pomocą siłownika hydraulicznego Zakres cięcia: -45° - +60° Wymiary: 942×442×548 mm Masa: 103 kg Maksymalny zakres cięcia [mm] Kąt 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Wyposażenie standardowe Siłownik hydrauliczny 3. generacji Stół do cięć pionowych Imadło szybkomocujące Układ chłodzenia Ogranicznik materiału – zderzak Automatyczne wyłączniki krańcowe Nowoczesne zabezpieczenie silnika przed przegrzaniem Podstawa mobilna na czterech kołach Instrukcja obsługi Cena jest ceną netto. Cena nie obejmuje kosztów transportu. Iodpjmrp Tljfx Ah Djtn W celu uzyskania dodatkowych informacji prosimy o kontakt telefoniczny lub mailowy. Zapraszamy również do zapoznania się z ofertą na naszej stronie internetowej.

Leto izdelave: 2012, Stanje: zelo dobro (rabljeno), Bernardo Technical Data Cutting capacity round 90°: 125 mm Cutting capacity flat 90°: 100 x 150 mm Cutting capacity round 45°: 95 mm Cutting capacity flat 45°: 95 x 76 mm Cutting capacity round 60°: 50 mm Itjdpfemkimhex Ah Dsn Cutting capacity flat 60°: 50 x 56 mm Working height: 730 mm Saw blade dimensions: 1638 x 13 x 0.65 mm Cutting speeds: 23 / 34 / 54 m/min Motor output S1 100%: 0.55 kW Motor input S6 40%: 0.75 kW Voltage: 230 V Machine dimensions (L x W x H): 1000 x 550 x 1100 mm Weight approx. 68 kg

Stanje: novo, Cutting diameter: 355 mm Saw blade dimensions: 3770 x 34 x 1.1 mm Cutting speed: 20 - 80 m/min Cutting width: 490 x 280 mm Cutting capacity at 45° round: 290 mm Itsdpfxemhm Aqs Ah Don Cutting capacity at 45° square: 250 mm Cutting capacity at 60° round: 230 mm Cutting capacity at 60° square: 180 mm Supply voltage: 400 Volt Total power requirement: 2.2 kW Machine weight: approx. 0.7 t Dimensions (L x W x H): 1.43 x 0.72 x 1.7 m Semi-automatic Mitre Bandsaw - Mitre cuts up to 45° left and right - Mitre cuts up to 60° right - Vise with quick-release device - Band tension control via manometer - Electric coolant system

Leto izdelave: 2016, Stanje: novo, Cutting capacity - round Ø 150 mm Cutting capacity - round 45° Ø 75 mm Cutting capacity - rectangular 150x125 mm Iodpfxjlp U T He Ah Djtn Cutting capacity - rectangular 45° 70x50 mm Cutting capacity - square 125 mm Cutting capacity - square 45° 50 mm Continuously variable speed 25–138 m/min Total power requirement 1.8 kW Machine weight approx. 35 kg