Tračna žaga - vodoravna

MBH CY 280 NL

Stanje: novo, NEBES TM 275 Bandsaw – 400 V Three Phase, NEW “CE” - INDUCTION motor - Cast iron frame - Adjustable cutting angle from 0° to 60° - Entire structure made of cast iron - Electric pump for blade lubrication and cooling - Oil-bath blade tension gauge - Front controls and two cutting speeds - Coolant pump bypass switch - Blade guide with hard metal (H.M.) pads Cutting capacities: - Round at 0°: 220 mm - Square at 0°: 200 x 200 mm - Flat at 0°: 230 x 185 mm - Round at 45°: 150 mm - Square at 45°: 150 x 150 mm - Flat at 45°: 150 x 200 mm - Round at 60°: 90 mm - Square at 60°: 90 x 90 mm - Flat at 60°: 90 x 120 mm - Power: 1.3 HP - Voltage: 400 V - Blade size: 2450 x 27 x 0.90 mm - Weight: 265 kg Lsdsh Nm Ncspfx Al Njaa

Stanje: delavnici obnovljeno (rabljeno), Please read the technical specifications thoroughly. If the machine is under consideration as an investment for you, we kindly ask that you provide your full identification, including a correct telephone number and email address, in order to receive a quotation. Deckel FP1 AKTIV (3-axis Active) Lasdpfsxpwfgsx Al Nea Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - 3-axis active digital display HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head swivels and extends horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Centralised lubrication Footprint (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been cosmetically refurbished and technically inspected. Videos demonstrating the geometry can be provided upon request. Backlash Y axis: 0.15 mm Backlash X axis: 0.3 mm Backlash Z axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y axis: 0.002 mm (measured over 150 mm) Parallelism deviation X axis: 0.002 mm (measured over 300 mm) The following parts have been renewed: - Central lubrication checked - Heidenhain digital display overhauled - Set of wipers installed - LEDs in active display replaced - Oil change - Vertical milling head newly fitted with bearings - Oil sight glass replaced Price: net, ex works, loaded from stock

Stanje: novo, Cutting capacity at 90°: round 305 mm Lasdeupw R Aspfx Al Nja Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cut! • Optimize workflow with CNC control Parameters such as quantity and material lengths can be entered, with automatic kerf compensation • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with various section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut-off lengths from 2 mm to 9,999 mm, remnant length 170 mm. Included: - Micro-spray unit - Leveling elements

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions: 3375 x 27 x 0.9 mm Band speed: 18 – 110 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Space requirement: approx. 1.5 x 1.75 x 1.9 m Double-mitre metal bandsaw with AutoCut function - Mitre cuts up to 60° left and 45° right - Ball-bearing rotary table - Side-adjustable clamping vice Laedpfx Ajnq Sansl Noa - Heavy-duty, large material support - Automatic coolant system Image shows semi-automatic version.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Cutting Capacity 0° round (pipe) 300 mm Cutting Capacity 0° round (solid material) 180 mm Cutting Capacity 0° rectangular horizontal (hollow section) 320 x 290 mm Cutting Capacity 0° bundle (pipe) 320 x 160 mm Cutting Capacity -45° round (pipe) 300 mm Cutting Capacity -45° round (solid material) 110 mm Cutting Capacity -45° rectangular horizontal (hollow section) 300 x 280 mm Cutting Capacity -60° round (pipe) 200 mm Cutting Capacity -60° round (solid material) 80 mm Cutting Capacity -60° rectangular horizontal (hollow section) 190 x 200 mm Cutting Capacity +45° round (pipe) 270 mm Cutting Capacity +45° round (solid material) 110 mm Cutting Capacity +45° rectangular horizontal (hollow section) 270 x 200 mm Table height for material infeed 800 mm Main motor 2.6 kW Cutting speed, infinitely variable 20 - 100 m/min Saw blade size 3660 x 27 x 0.9 mm Machine dimensions (L x W x H) approx. 1800 x 950 x 1400 mm Net weight 585 kg Accessories / Special Features: • Semi-automatic pivoting frame metal band saw • After starting the cutting cycle, the vice automatically clamps – after the process ends, it returns to the starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting e.g. stainless steel, tool steel, hollow sections, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing rotary table • Saw arm inclined by 25°, resulting in longer blade life • Swivelling saw arm from +60° to -45° • Chip removal brush for optimal cleaning and maintenance of the saw blade • With frequency inverter: allows for infinitely variable adjustment of the saw blade speed from 20 - 100 m/min. • BRP – Saw blade monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control the upper and lower position of the saw arm • No need to set the upper end point • Length stop with scale, 3 m removal on the left side Laodpfxoxz Dqms Al Nsa • Cut probe • Swivelling control panel • Micro spray unit • 2 x roller conveyors: 3 m unloading on the left and 6 m infeed on the right • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Leto izdelave: 2013, obratovalne ure: 702 h, stanje: rabljeno, Leistung: 17 kW (23 PS) Motormarke: Briggs & Stratton, Vanguard Allgemeiner Zustand: gut Technischer Zustand: gut Optischer Zustand: gut Lajdjxgti Ajpfx Al Nsa Wenden Sie sich an Christian Theißen, um weitere Informationen zu erhalten. Hersteller: Rapid Typ: 430 Baujahr: 2013 Produktart: Gebraucht Daten: Gesamtabmessungen LxBxH: 2046 x 1190 x 1200 mm Antriebsart: Benzin, 17 kW / 23 PS Motor: Briggs & Stratton, Vanguard Stunden: 702,5 Gewicht: 410 kg Besonderheiten: Briggs & Stratton 2-Zylinder-Viertakt-Benzinmotor mit 23 PS, Getriebe: stufenloser hydrostatischer Fahrantrieb mit Einscheibentrockenkupplung, Lenkholm: werkzeuglos höhenverstellbar, Lenkung: Lenkbremseinrichtung, Bereifung: 23x8,50 - 12AS, Kraftstoff: Benzin, Gewicht: ca. 215 kg, Zusatzsteuergerät für Hydraulik, Baujahr: 2014 / Lipco Mulchgerät (Schlegelmäher), Typ: ME 104-LZ, Gewicht: 170 kg, Baujahr: 2014, Arbeitsbreite 1 m. Preis auf Anfrage Standort: 41468 Neuss: sofort verfügbar

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean-air extraction unit with H3 certification Suction inlet: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum airflow: 1,140 m³/h Rated airflow: 814 m³/h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: Ex stock 54634 Bitburg - immediately available - Ljdpfohkztwsx Al Noaa

Leto izdelave: 2026, stanje: rabljeno, New: Yes Lsdpoypcy Dsfx Al Njaa Price: On request

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, volumenski pretok: 2.600 m³/h, sesalna zmogljivost: 2.600 m³/h, raven hrupa: 79 dB, skupna višina: 2.200 mm, skupna dolžina: 1.000 mm, skupna širina: 800 mm, skupna masa: 200 kg, trajanje garancije: 12 meseci, Odsesavanje za dvojne kotne žage ali žage, ki se uporabljajo v aluminijastem sektorju, npr. Emmegi / Elumatec / Mecal / FOM / Rapid / Pertici itd. Če iščete zmogljivo in tiho odsesavanje, ste na pravem mestu. Alternativno je na voljo tudi predkrmilna naprava z vključenim stikalom za vašo dvojno kotno žago, ki deluje preko breznapetostnega kontakta. Lasdpfx Ajwii Hxjl Nsa Odsesavanje je odlično primerno za aluminij / PVC / jeklo. Zelo zmogljivo in izredno tiho odsesavanje, ki ostaja pod 80 db! 2600 m³ na uro sesalne zmogljivosti 3 kW motor Odsesavanje vključuje 14 metrov cev z 2 izhodoma.

Stanje: rabljeno, No. 04489 Mobile Extraction Unit / Mobile Dust Extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust class 2, 0.2 mg/m³ Design type 1, for extracting combustible dusts in Zone 22 400 V, 3 kW, with power cable and plug Nominal air flow rate 1850 m³/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m² Filter cleaning by hand crank Ledpfxoxnprcs Al Neaa Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Unit is mobile CE compliant Including new spare filter Operating manual available Transport dimensions approx. 1700 x 800 x 2100 mm (LxWxH) Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale in as-is condition Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: “sold as inspected”. Terms of payment: Prices plus statutory VAT, payment before collection or dispatch. Delivery terms: ex stock