Tračna žaga

GEORGE CY210N

Stanje: novo, Maximum welding current: 300 A Open-circuit voltage: 55 - 76 V Supply voltage: 400 V Weight: 75 kg Hsdeu Aw Shspfx Afwoff Dimensions (LxWxH): 950 x 560 x 880 mm Shielded gas welding machine: - with pulse function - 300 Ampere - 400 Volt - 3 m torch hose package - Earth cable - Wire feed rollers for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0 mm

Stanje: novo, Leto izdelave: 2026, Horizontal band saw with a swiveling arm for metal cutting, enables cutting in a plane perpendicular to the axis of the workpiece as well as at any angle from 0 to 60º. Material feeding can be performed manually or with any mechanical feeder, with automatic tool feed. The blade guides are equipped with dedicated carbide plates and bearings, which significantly affects blade guidance, its durability, cut straightness, precision, and cut quality. The saw arm is made of profiled CAST IRON. The control panel is located next to the arm. The drive from the electric motor is transmitted to the drive wheel of the cutting blade via a worm gear motor. The blade is tensioned on two cast iron wheels with a manual tensioner and guided by an adjustable rolling and linear carbide guide set. There is a separate coolant reservoir with an electric pump inside. The descent speed of the arm (cutting speed) is adjusted with a hydraulic cylinder. Feed speed is controlled via the control panel. Two blade speeds are selectable: 36 and 72 m/min. In the rest position of the arm (after the cutting process), the blade drive is automatically switched off. Safety is ensured by the blade covers and microswitches that stop the motor after the cutting cycle or upon opening any of the covers; additional protection is provided by the automatic shutoff of the bandsaw in the event of blade breakage. Technical specifications Band saw blade dimensions 2455×27×0.9 mm Blade tensioning mechanical (manual) Blade speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm descent control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400 V Hfodpfx Asvuf S Njfwsf Motor power 1.1 kW Net/Gross weight 220 kg / 284 kg Warranty 12 months Manual operation yes CE declaration yes Miter angles 0º ø230 mm 260×150 mm 225×225 mm 45º ø165 mm 180×130 mm 165×165 mm 60º ø105 mm 100×90 mm 110×110 mm *Please note: the device is supplied by default without a CEE connector, as there are many different types. If you would like to receive a connector along with the machine, please contact the seller before purchasing or during the ordering process.

Stanje: novo, Bandsaw blade --- 2925 x 27 x 0.9 mm Sawing speed --- variable 20 ~ 80 m/min Motor --- 400V - 2.2 kW Weight --- 495 kg Cutting capacity 90° ----- 270 mm / 260 x 320 mm Cutting capacity 60° ----- 140 mm / 140 x 140 mm Cutting capacity 45° ----- 230 mm / 220 x 220 mm Cutting capacity -45° ---- 200 mm / 220 x 150 mm INCLUDES Bandsaw blade Workpiece stop Base cabinet Manometer for bandsaw blade tension Bandsaw blade guide with carbide inserts Quick-release vice Coolant pump Hydraulic cylinder Motor protection switch Hodpsga Tzuefx Afwsff Automatic end stop

Stanje: novo, Leto izdelave: 2026, Professionelle, sehr leistungsstarke und effiziente Metallbandsäge mit 45° schwenkbarem Sägebügel. Die perfekte Lösung für Schlossereien, Produktionsbetriebe und Handwerkswerkstätten. Seit vielen Jahren unerreicht - die Konstruktion und die massive Bauweise machen sie zur idealen Wahl. Maschinenbeschreibung Die professionelle und äußerst leistungsfähige Metallbandsäge mit 45° Schwenkarm, CORMAK BS 712 SW, basiert auf ausgereiften Lösungen und ist in ihrer Klasse konkurrenzlos. Der aus geformtem Sphäroguss gefertigte Sägebügel sorgt für Steifigkeit während des Betriebs und absorbiert sämtliche Vibrationen. Das Bedienfeld ist am Sägebügel angebracht. Die Maschine besticht durch hohe Effizienz und eine unkomplizierte Bedienung. Sie ermöglicht Schnitte in der Vertikalebene sowie in der zur Achse des Schnittmaterials senkrechten Ebene oder unter jedem beliebigen Winkel im Bereich von 45° bis 90°. Das Werkstück kann manuell oder durch eine beliebige Zuführeinrichtung zugeführt werden. Der Vorschub erfolgt während des Schneidens gravitationsgesteuert nach dem Prinzip des Ölflusses in einem zweikammerigen Hydraulikzylinder. Die passende Senkgeschwindigkeit des Sägebügels wird durch ein Ventil reguliert, das den Ölfluss zwischen den Zylinderkammern steuert. Die robuste, stabile und präzise Bauweise sowie der durchgehende Guss-Sägebügel gewährleisten hohe Steifigkeit und Stabilität beim Schneiden und somit Genauigkeit und langfristige Zuverlässigkeit. Das für die Maschine verwendete 20 mm breite Sägeband ermöglicht das Schneiden großer Stückzahlen. Die erforderliche Bandschnittgeschwindigkeit wird durch das Übersetzungsverhältnis der Riemenscheibe zwischen Schneckengetriebe und Antriebsmotor eingestellt. Technische Daten: Motorleistung: 1,1 kW Bandschnittgeschwindigkeiten: 22/33/45/65 m/min Stromversorgung: 400 V Bandabmessungen: 2360 × 20 × 0,9 mm Schnittbereich: 45°L – 45°R Gewicht: 145 kg Abmessungen: 1280 × 575 × 1140 mm Schnittkapazität: Winkel 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 Der angegebene Preis ist ein Nettopreis. Versandkosten sind nicht im Preis enthalten. Hfodpfx Afow U Skvewjf Für weitere Informationen kontaktieren Sie uns bitte telefonisch oder per E-Mail. Unser vollständiges Angebot finden Sie auf unserer Webseite.

Leto izdelave: 2001, stanje: pripravljen za uporabo (rabljen), Delovna dolžina: 2040 mm, maksimalna zmogljivost reza: 3 mm, število gibov: 30 gibov/min, višina mize: cca 850 mm, zadnji prislon: 750 mm. Dimenzije stroja (D/Š/V): cca 2400 mm/2000 mm/1450 mm, teža: cca 1500 kg. Ogled na lokaciji je možen. Hjdpfx Afox Hz Nyjwjff

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90 degrees (flat): 280 x 220 mm Cutting capacity at 90 degrees (square): 220 x 220 mm Hodpfx Aexaa S Rjfwsff Cutting capacity at 45 degrees (flat): 220 x 200 mm Cutting capacity at 45 degrees (round): 230 mm Cutting capacity at 45 degrees (square): 200 x 200 mm Cutting capacity at 60 degrees (flat): 140 x 100 mm Cutting capacity at 60 degrees (square): 100 x 100 mm Cutting capacity at 60 degrees (round): 150 mm Vice opening: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space required: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic, semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP microprocessor controller EVO for full function control * Mounted on the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of the saw bow lowering - Saw blade guides made of carbide plates - Hydraulic saw blade tensioning, incl. digital value display - 2 saw blade speeds - 1 Bi-Metal saw blade - 1 angle stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation features: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Tehnične specifikacije glejte PDF datoteko. Hodexp Hygjpfx Afwoff

Leto izdelave: 1980, stanje: pripravljen za uporabo (rabljen), Dolžina reza: 2520 mm, debelina reza: 4 mm, napetost: 380V, priključek: 16A. Nožev škarij verjetno zaradi obrabe ni več mogoče brusiti, zato jih je treba zamenjati. Ogled na lokaciji je možen. Hfodpfxsxz Ewue Afwef

Stanje: novo, dolžina tračnega lista: 2.480 mm, Metal bandsaw CY275A An extremely high-quality metal bandsaw with reducer and carbide blade guides! The CY275A metal bandsaw is 3-phase and features a lubrication system, blade tension indicator, reducer, and carbide blade guides for precise work and exceptionally long service life. Technical data: Motor with reducer: 1.1 kW / 1,5 HP Voltage: 400V/50 Hz, 3-phase 2 cutting speeds: 45 - 90 m/min Blade size: 2480 x 27 x 0.9 mm Quick workpiece clamp Saw base Cutting at 0° - round 240 mm / square 190 x 190 mm / rectangular 245 x 150 mm Cutting at 45° - round 145 mm / square 150 x 150 mm / rectangular 190 x 150 mm Cutting at 60° - round 90 mm / square 90 x 90 mm / rectangular 120 x 90 mm Net weight: 185 kg Gross weight: 200 kg Hfodpfoxtu U Hex Afwof Packaging (W x D x H) 140 x 65 x 90 cm

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (flat): 110 x 110 mm Vice opening: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 435 kg Space requirement approx.: 1000 x 2000 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts up to 60° - MEP EVO microprocessor control for monitoring all functions * Front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw frame lowering - Saw band guides with carbide plates - Hydraulic blade tensioning – including digital display - 2x band saw speeds - 1x Bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush - Machine base with forklift slots - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice Hfsdpfx Aew U U Uwsfwjf