Vodni-/vlečni vretenasti stružnica, premer struženja nad posteljo 400–499 mm nakup rabljenega (217)

Stanje: novo, Swing over bed: 410 mm Swing over cross slide: 240 mm Turning length: 1,000 mm Swing in the gap: 530 mm Spindle speed: 65 – 1,810 rpm Centre height: 205 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Total power requirement: 2.2 kW Machine weight approx.: 0.9 t Space required approx.: 1.9 x 0.8 x 1.3 m Leadscrew and feed shaft lathe with: • 3-axis digital readout fully installed • Electromagnetic main spindle brake • Automatic feed in longitudinal and transverse direction • Safety relay • Micrometer stop Gjdpfom Rlb Nox Ab Tjuk • Coolant device • 3-jaw chuck with 1 set each of hard and soft jaws • German operating manual.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Torno Leit & Zugspindel "DREHMA - DA 410x1500" / Nuova macchina dimostrativa - Macchina dimostrativa / Anno di costruzione 2025 - Marcatura CE - Visualizzatore digitale - Diametro tornibile su bancale 410mm - Diametro tornibile su carrello 225mm Godpfsw Sd Afox Ab Teuk - Diametro tornibile in gola 580mm - Lunghezza di tornitura 1500mm - Passaggio barra 52mm - Gamma di velocità / Cambio 45-1800 giri/min - Avanzamenti automatici longitudinali / trasversali - Filettature / Metriche / Pollici ecc. - Contropunta CM4 - Lubrificazione centralizzata - Potenza motore 3,5 kW - Lunetta fissa e mobile - Portautensili Multifix + 4 inserti - Mandrino a 3 griffe 200mm - Mandrino a 4 griffe 250mm - Piatto - Protezione mandrino - Protezione zona di lavoro frontale - Impianto di raffreddamento - Lampada di lavoro - Contropunta rotante + mandrino portapunta - Piedi macchina - Documentazione Dimensioni: LxPxA 2,5x1x1,6 metri / Peso 1850Kg Salvo errori e omissioni.

Stanje: rabljeno, Swing diameter over bed: 480 mm Godpfotqqx Asx Ab Teuk Swing diameter over cross-slide: 300 mm Turning length: 1500 mm Center height: 240 mm Center distance: 1500 mm Spindle bore: 42 mm Spindle speeds: 14 – 1400 rpm Total power requirement: kW Machine weight approx. 2.4 t Machine dimensions (L x W x H): 3.00 x 1.05 x 1.40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX toolpost, live center

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 52 mm, premer struženja: 450 mm, stružna dolžina: 1.600 mm, Pinacho lathe model L1 225 x 1600mm bed length, swing over bed 450mm, swing over gap 690mm, swing over cross-slide 215mm, spindle bore 52mm, 18 speeds from 32 to 1800rpm, 5.5 HP motor, equipped with steadies, quick-change toolpost, and various accessories. The lathe is in good condition. Gsdpjv Rm Udjfx Ab Teuk

Stanje: dober (rabljeno), Težki stružnica, stružnica, stružna postelja, vodilno-vlečni stružnica, Leit- und Zugspindel-stružnica -Proizvajalec: Meuser, vodilno-vlečni stružnica tip M-IV-S -Postelja stroja: kaljena -Dolžina struženja: 3800 mm -Premer struženja nad posteljo: 720 mm -Premer struženja nad suportom: 440 mm -Vretenina odprtina: Ø 95 mm -Hitrosti vretena: 22,4 - 1000 o/min -Klinično vpenjalo Forkardt Ø 400 mm -Držalo konjička: MK6 -Pogon: 18 kW -Oprema: 1x luneta, Multifix nosilec orodja, orodja glej fotografije Godpfxswrfkfo Ab Tsuk -Dimenzije: 5930/1650/H1600 mm -Teža: 7500 kg

Stanje: dober (rabljeno), Leto izdelave: 1970, Make: Metalexport Poland Year of manufacture: 1970 Type / Model: TUE 40 Machine number: 8604 Control: conventional Distance between centers: 1,500 mm Spindle bore: 38 mm Center height: 210 mm Swing diameter over bed: 420 mm over cross slide: 240 mm in the gap: 600 mm Guodpjv N Tu Iefx Ab Tjk Speed range: 22.4 to 1,000 rpm Feed: Connection: kW Accessories/Equipment: Fixed and travelling steady rest, 4-way tool post; 200 mm 3-jaw chuck; coolant system Condition: good Weight: approx. 2.5 t Dimensions: 2,800 x 800 x 1,200 mm

Stanje: pripravljen za uporabo (rabljen), Lathe, make Takisava, type TAL 510, equipped with chuck, quick-change tool post, and live center. Gedpfxsvyuuqj Ab Touk

Stanje: dober (rabljeno), Leit- & vlečna stružnica GEMA LZ 200 -Triosni digitalni prikazovalnik "NOVO" -Vodila "ZELO DOBRA" -Višina konic: 200 mm -Razdalja med konicama: 1000 mm -Obratovalni premer nad ležiščem: 400 mm -Obratovalni premer nad suportom: 200 mm -Premer odprtine vretena: 54 mm -Avtomatski vzdolžni / čelni pomiki -Območje vrtljajev: 36–2200 obr/min -Konjiček MK 4 – pomik 200 mm -Tročeljustna vpenjalna glava 250 mm -Električna zaščita vpenjalne glave -Multifix z vložki -Hladilna naprava -Delovna svetilka -Strojne noge -Kad za ostružke Dimenzije: DxŠxV 2x1,2x1,6 metra / Teža 1800 kg Godpfow Ic Uxsx Ab Touk Pridržujemo si pravico do napak in sprememb.

Stanje: rabljeno, Leto izdelave: 1973, Swing diameter over bed 490 mm Swing diameter over cross slide 280 mm Turning length 2000 mm Gujdstqqvvjpfx Ab Tjk Centre height 245 mm Centre distance 2000 mm Spindle bore 62 mm Total power requirement 7.5 kW Machine weight approx. 3.5 t Machine dimensions (L x W x H) 3.78 x 1.17 x 1.42 m Accessories: 3-jaw chuck 240 mmø, faceplate 400 mmø, MULTIFIX tool post, fixed steady rest, coolant system

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, H. Ernault Somua lathe model Cholet 550, with 1,600 mm distance between centers, 500 mm swing over bed, and 275 mm swing over cross slide. Features 12 spindle speeds ranging from 32 to 1275 rpm, 52 mm spindle bore, equipped with a 3-jaw universal chuck, quick-change tool post, and various accessories including a steady rest. The lathe is in good condition. Gedpevdkmdofx Ab Touk

Stanje: dober (rabljeno), Leto izdelave: 1980, Težki stružni stroj, stružnica, strugarski stroj, stružnica z vodilnim in pogonskim vretenom - Proizvajalec: VDF Heidenreich & Harbeck, stružnica z vodilnim in pogonskim vretenom, tip V3 - Postelja stroja: kaljena - Dolžina struženja: 1700 mm - Premer struženja nad posteljo: 500 mm - Premer struženja nad suportom: 300 mm - Vretena odprtina: Ø 57 mm - Hitrosti vretena: 19 - 2000 obr/min Guodpfotvhryox Ab Tjk - Čeljustno vpenjalo: Forkardt Ø 250 mm - Sprejem konjička: MK4 - Luneta: 150 mm - Pogon: 7,5 kW - Dodatki: hitrovpenjalna klešča, držalo orodja, orodja glej slike - Dimenzije: 1440/3370/H1515 mm - Teža: 2510 kg

Stanje: dober (rabljeno), Leto izdelave: 1974, Type / Model: 16K20 Control: conventional Distance between centers: 750 mm Spindle bore: 55 mm Center height: 220 mm Swing diameter over bed: 440 mm Speed range: 12 to 1,600 rpm Feed: Connected load: 10 kW Accessories/Equipment: Condition: good Weight: approx. 2.4 t Gedpfsvug Dtex Ab Tsuk Dimensions: 2,600 x 1,200 x 1,700 mm

Stanje: dober (rabljeno), Kern lathe D 23 V with Forkard chuck, Multifix B quick-change toolpost, and digital readout Godpfx Ajvl Ig Deb Touk

Stanje: novo, Leto izdelave: 2025, Industrial Metal Lathe CORMAK TORNADO 460x1500 – features double cast iron bed and robust construction, equipped with a 12-speed gearbox and a powerful 5.5 kW / 400V induction motor, delivering maximum torque and a large 82 mm spindle bore. Key Benefits: - Versatile applications: This lathe is ideal for a wide range of tasks, including internal and external turning, taper turning, metric, imperial, module, and DP threading, polishing, drilling, and broaching. - Stable construction: The 300 mm wide cast iron bed is hardened and precision ground, ensuring high vibration reduction and stable operation even under heavy loads. - Digital precision: Fitted with a digital readout (DRO) on two axes (longitudinal and cross), displaying exact travel values on the screen via optical linear scales. - High-quality spindle: Reinforced spindle bearing system and large 82 mm bore ensure optimal performance. The set includes a 250 mm 3-jaw chuck and a 320 mm 4-jaw chuck, along with a 5.5 kW drive motor. - Efficiency and productivity: Rapid longitudinal and cross feed control via joystick significantly reduces machining time, while hardened and ground spindle gearbox gears ensure long-term durability and reliability. - Extensive threading capability: Capable of cutting right and left threads in metric (41) from 0.1 to 14 mm, imperial (60) from 2 to 112 T.P.I., module (34) from 0.1 to 7 M.P., and DP (50) from 4 to 112 D.P., with parameter changeovers possible without gear wheel replacement, facilitating fast and convenient operation. - Precise thread counting: Equipped with a thread chasing dial, allowing quick carriage return to the initial position after disengaging the lead screw nut. - Ergonomic and user-friendly: Intuitive control panel on the gearbox allows quick adjustments of spindle speed and automatic feed. - Machining large workpieces: Removable bed gap allows for turning parts up to 690 mm in diameter and 240 mm in length (with gap removed), increasing the machine’s versatility. Technical Specifications: Swing over bed: Ø460 mm Swing over cross slide: Ø274 mm Swing in gap (diameter x width): 690 mm x 240 mm Centre height: 230 mm Distance between centers: 1500 mm Bed width: 300 mm Max. tool cross-section: 25 x 25 mm Total cross slide travel: 290 mm Total top slide travel: 120 mm Spindle bore: Ø82 mm Spindle nose: D1-8 Spindle taper: Ø90 (1:20) Number of spindle speeds: 12 Spindle speed range: 25–2000 rpm Leadscrew diameter & pitch: Ø35 mm x 6 mm Inch threads, pitch: 2–112 TPI (60) Metric threads: 0.1–14 mm (41) DP gears: 4–112 D.P. (50) Module gears: 0.1–7 M.P. (34) Longitudinal feed: 0.031–1.7 mm/rev (42) Cross feed: 0.014–0.784 mm (42) Tailstock quill travel: 120 mm Gusdpfxsvzzqbs Ab Tok Tailstock quill diameter: Ø60 mm Morse taper: MT4 Main spindle motor: 5.5 kW Coolant pump motor: 0.09 kW Machine dimensions (LxWxH): 2720 x 1040 x 1340 mm Net weight: 2445 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, premer struženja nad prečnim suportom: 196 mm, izvrtina vretena: 42 mm, premer struženja: 350 mm, Stružnica Harrison V350 Guedpfx Abjxc H D Eo Tok Leto izdelave: 2008 Spremenljivo število vrtljajev v treh prestavah, od 20 do 3250 vrt/min. Digitalni prikaz po dveh oseh znamke Acu-rite. Vzdolžni in prečni pomik. Premer struženja nad posteljo: 350 mm Premer struženja nad suportom: 196 mm Premer struženja v izrezu: 535 mm Vpenjanje glave: Camlock D1-4 Vretensko izvrtina: 42 mm Vpenjanje konjička: MK4 Opremljena s hitroizmenljivim nosilcem Multifix B in hladilnim sistemom.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 155 mm, premer struženja: 570 mm, Pinacho lathe, model S90/285-155, with 3,100 mm between centers, 155 mm spindle bore. Equipped with two chucks, one mounted on the front and one on the rear of the headstock. Comes with digital readout, swing over bed 570 mm, swing over gap 800 mm, swing over cross slide 350 mm. A highly versatile lathe, ideal for thread cutting in metric, Whitworth, modular, and pitch threads. 155 mm spindle bore, 7.5 HP motor, rapid-change tool post, steady rest included. The lathe is in very good condition. Guodpfowqz Dxex Ab Tek

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 280 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 470 mm, višina središča: 235 mm, stružna dolžina: 1.000 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.150 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.800 kg, nosilec puše: MK 4, Centre height: 235 mm Centre distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Guodecirnispfx Ab Tek Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surfaces) of the carriage and cross slide Manual central lubrication with a pump for the longitudinal and cross slides Complete coolant system with rear splash guard and carriage splash protection Chuck guard Control rod with 3 adjustable cams Machine lamp Fixed centre Set of machine mounting plates

Stanje: rabljeno, Swing diameter over bed / mm Swing diameter over slide / mm Guedpfsv Rgzwjx Ab Tjk Turning length / mm Total power requirement / kW Machine weight approx. / t Space requirement approx. / m

Stanje: novo, Leto izdelave: 2025, Swing diameter over bed 460 mm Swing diameter over saddle 270 mm Turning length 1500 mm Centre height 230 mm Spindle bore 76 mm Drive power 11 kW - New machine - with 2-axis digital readout ACU-RITE incl. constant cutting speed mounted on saddle, MULTIFIX quick-change toolpost size MC * For more information about the exact standard equipment and available options, please visit our website or contact us directly * Gedpfxewrma Uo Ab Tsuk

Stanje: novo, Bernardo Universal Lathe Compact 400 V Technical Specifications Centre Distance: 850 mm Centre Height: 200 mm Swing Over Bed: 400 mm Swing Over Cross Slide: 245 mm Bed Width: 260 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1-5 Speed Range, 2 Steps: 50 - 450 / 450 - 2500 rpm Longitudinal Feed Range: (20) 0.025 - 2 mm/rev Cross Feed Range: (20) 0.012 - 1 mm/rev Metric Threads: (26) 0.2 - 14 mm Inch Threads: (42) 1 - 80 TPI Quill Diameter: 50 mm Quill Stroke: 120 mm Quill Taper: MT 3 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 1900 x 1000 x 1610 mm Weight approx.: 1185 kg Features • Equipped as standard with Delta frequency inverter for high torque at low speeds and near constant speed under load • Infinitely variable speed control, set speed is displayed digitally • Massive prism bed with additional ribbing to minimize vibration effects • Versatile applications in general engineering, production, single-part manufacturing, etc. • Modern precision angular contact spindle bearings • Machine bed is cast in one piece, extremely torsion-resistant and low vibration, meeting essential requirements for precise turning • Space-saving installation with pull-out chip tray at the front • Standard 52 mm spindle bore for machining large shaft diameters Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PO3-200 mm / D5 • Faceplate 320 mm • Fixed steady rest – max. 130 mm passage diameter • Follow rest – max. 100 mm passage diameter • Coolant system • Quick-change tool post with 4 holders • Safety guard for the quick-change tool post • Micrometer longitudinal stop • Slip clutch • Motor with magnetic brake according to CE standard • Initial fill with Shell Tellus 46 • Frequency inverter • Digital speed display • Pull-out chip tray • LED machine lamp Guodpfx Absd Ertrs Tok • Change gears • Reducing sleeve • 2 centre points • Chip guard • Operating tools

Stanje: rabljeno, Leto izdelave: 1974, premer struženja nad ležiščem sani: 480 mm, širina na sredini: 1.500 mm, Lead and Feed Screw Lathe Manufacturer: Heidenreich & Harbeck Model: Hanseat 480 Completely overhauled in 2012 Technical data Make: Heidenreich & Harbeck Model: Hanseat 480 Year of manufacture: 1974, completely overhauled in 2012 Control: conventional Centre distance: 1500 mm Swing diameter over bed: 480 mm Swing diameter over cross slide: 295 mm Spindle speed range: 20 – 2190 rpm Gedpjwm D Ilofx Ab Tjuk Dimensions (LxWxH): 3.50 x 1.20 x 1.55 m Machine weight: 1200 kg Equipment - 3-jaw chuck D 250 mm, mounted - Faceplate D 400 mm - 10 quick-change tool holders - 1 steady rest All information without guarantee. A demonstration under power is possible at any time in our showroom.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 41 mm, stružna dolžina: 1.000 mm, Amutio Cazeneuve Lathe Model HB 500 with 1000 mm between centers. Maximum swing over bed: 500 mm, maximum swing over cross-slide: 300 mm, spindle bore: 41 mm. Equipped with 18 spindle speeds ranging from 25 rpm to 2000 rpm. Includes Fagor digital readout, fixed and traveling steadies, safety guards, and operates on 220V. Guedpfsv Rnfqjx Ab Tek

Leto izdelave: 1961, Stanje: rabljeno, Centre height 235 mm Gjdpfxel Ab Hte Ab Tjuk Turning diameter 470 mm Spindle speed 2700 rpm Turning length 1500 mm Incl. accessories

Stanje: novo, Bernardo Lead and Feed Shaft Lathe Master 410 Pro Distance between centres: 1000 mm Centre height: 205 mm Swing diameter over bed: 410 mm Swing diameter over gap*: 530 mm Swing diameter over cross slide: 260 mm Bed width: 205 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range (16): 45 – 1800 rpm Longitudinal feed range (48): 0.043 – 0.653 mm/rev Cross feed range (48): 0.014 – 0.206 mm/rev Metric threads (36): 0.4 – 7.0 mm Imperial threads (28): 4 – 56 TPI Gujdpfx Abofft N Se Tek Quill diameter: 45 mm Quill travel: 125 mm Quill taper: MT 3 Motor power: 1.5 / 2.4 kW Machine dimensions (W x D x H): 1820 x 920 x 1500 mm Weight: approx. 760 kg * Removable bed gap: 235 mm Scope of delivery: - 3-axis digital readout i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Fixed steady rest – max. capacity diam. 70 mm - Travelling steady rest – max. capacity diam. 60 mm - Coolant system - Initial filling with Shell Tellus 46 - Removable chip tray - Face plate 280 mm - Four-position toolpost - Safety guard for four-position toolpost - Slip clutch - Micrometer longitudinal stop - Thread dial indicator - LED work light - Reducing bush - Change gears - 2 centre points - Foot pedal with braking function (CE compliant) - Motor with magnetic brake (CE standard) - Chip guard/rear splash guard - Base frame - Operating tools

Stanje: rabljeno, Leto izdelave: 1968, Swing diameter over bed 450 mm Turning length 1000 mm Swing diameter over cross slide 232 mm Motor power 10 HP Spindle speed 31 - 1600 rpm Machine weight approx. 1.7 t Gsdpfeuddc Tjx Ab Teuk Required space approx. 2.50 x 1.30 x 1.60 m Including documentation