Vodni-/vlečni vretenasti stružnica, premer struženja nad posteljo 400–499 mm nakup rabljenega (217)

Stanje: novo, Parallel lathe with Fervi T075/400V3A digital readout. Monobloc cast iron bed. Centre height: 230 mm Max. swing over bed: 460 mm Max. swing over carriage: 270 mm Max. swing in gap: 690 mm Tool height: 25 mm Distance between centres: 1500 mm Distance between guides: 300 mm Spindle bore taper: MT7 Spindle bore: 58 mm Spindle nose: Camlock D1-8 Spindle speeds (12): 25–1700 rpm Longitudinal feeds (42): 0.031–1.7 mm/rev Cross feeds (42): 0.014–0.784 mm/rev Metric threads (41): 0.1–14 mm Inch threads (60): 2–112 TPI Tailstock quill stroke: 130 mm Tailstock taper: MT4 Motor: 400 V 50 Hz 5.5 kW Coolant pump: 400 V 50 Hz 90 W Machine dimensions: 2750 x 1080 x 1370 mm Net weight: 2020 kg Total dimensions: 2870 x 1180 x 1570 mm Gross weight: 2200 kg Guodpfx Abevbqv He Tok Included accessories: 3-jaw self-centering chuck Ø250 mm / D1-8 4-jaw self-centering chuck Ø300 mm / D1-8 Faceplate Ø350 mm Fixed stead rest Travelling (follow) steady rest Reducing sleeve MT 7/4 Fixed tailstock centre MT 4 Rotating tailstock centre MT 4 Threading dial indicator Quick-change tool post guard Spindle guard Rear splash guard Type B quick-change tool post LED light Coolant system Electromechanical foot brake Carriage gears in oil bath Rapid-lock tailstock carriage

Stanje: dober (rabljeno), Well-maintained TOS TRENCIN SUI40-50 lathe Gujdpfx Abjrwd Hzj Tjk Centre distance: 1,500 mm Swing over bed: 500 mm Swing over cross slide: 320 mm Spindle speed: 14 to 2,240 rpm The machine is operational and in good condition.

Stanje: dober (rabljeno), Leto izdelave: 1999, Deli, ki so prikazane na fotografijah z roko, niso vključene. Gusdpfow Uiguox Ab Tjk Tehnični podatki so prikazani na sliki.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Through-hole 75 mm Chuck 500 mm with rotating jaws Gusdpfeqwgz Usx Ab Tok Max. workpiece diameter 640 mm

Stanje: zelo dobro (rabljeno), - Digital 3-axis position display. - Accessories included. Working Area Centre distance: 1000 mm Centre height: 200 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 250 mm Distance from compound slide to turning centre: 40 mm Bed width: 260 mm Longitudinal slide travel: 900 mm Gedpfxow U Ac Nj Ab Tjuk Cross slide travel: 220 mm Compound slide travel: 110 mm Bed saddle guide length: 380 mm Tool shank cross section: 20x20 mm² Spindle Spindle nose as per DIN 55 029 (Camlock): 5" Spindle bore: Ø 50 mm Internal taper as per 7178: 1:22 Max. face plate diameter: Ø 260 mm Max. chuck diameter: Ø 200 mm Spindle speed range: 40 – 3000 rpm Speed control: stepless Mechanical gear steps: 4 Drive Motor Three-phase motor with integrated brake Stepless speed control (frequency inverter) Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Tailstock Quill diameter: Ø 50 mm Quill stroke: 120 mm Quill taper: MT 3 Machine Dimensions Overall length: 1950 mm Overall height: 1635 mm Overall width: 1060 mm Spindle height over floor: 1133 mm Total machine weight: 865 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, premer struženja nad prečnim suportom: 420 mm, izvrtina vretena: 106 mm, premer struženja nad ležiščem sani: 650 mm, premer struženja nad zgornjim sanežem: 420 mm, stružna dolžina: 2.000 mm, hitrost pomika os X: 5 m/min, hitrost podajanja os Z: 10 m/min, skupna dolžina: 1.900 mm, skupna širina: 2.100 mm, skupna višina: 1.900 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 1 obr/min, skupna masa: 5.100 kg, premer trikrake glave: 650 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, DMT stružnica KERN CD650 je primerna za precizna dela in težko obdelavo. Idealna za izdelavo posameznih kosov in maloserijsko proizvodnjo. Dodatne informacije: Teža: 5.100 kg Mere: Stroj: 1,9 m + končna dolžina x 2,1 m x 1,9 m (D x Š x V) Električna omara: 1,2 x 0,5 x 1,6 m (D x Š x V) Oprema in opcije: C-os s cikli vrtanja, rezkanja in graviranja ter možnostjo prostega ICP vnosa Ethernet in USB priključek za povezavo v mrežo Transportni trak za odrezke Originalna dokumentacija Fiksna in gibljiva luneta Samo-centrirna 3-čeljustna vpenjalna glava Ø400 mm Godpfew A Iu Iox Ab Teuk Bdoc Rx Trsw A Iu Iofvsg Neodvisna 4-čeljustna vpenjalna glava Ø600 mm Vpenjalna/prijemalna plošča Ø650 mm Razne notranje/zunanje čeljusti Fiksne in gibljive konice Približno 30 večnamenskih držal tipa C Vrtalna glava z MK5 vpetjem

Stanje: novo, Leto izdelave: 2025, Swing diameter over bed 400 mm Swing diameter over cross-slide 246 mm Turning length 1250 mm Gujdpfx Aswp Tbgeb Tjk Centre height 195 mm Spindle bore 54 mm Drive power 7.5 kW - New machine - - Handwheel on the left of the cross-slide with 3-axis digital readout FAGOR INNOVA 30iT and micrometer for bed * For more information about the precise standard configuration and available options, please visit our website or contact us directly *

Stanje: dober (rabljeno), Leto izdelave: 2007, Description Leadscrew and feed shaft lathe OPTIMUM D320 x 920 SG Centre height: 160 mm Centre distance: 920 mm Spindle speed: 65 – 1800 rpm, 18 steps Swing over support: 178 mm Swing over bed gap removed: 430 mm Turning length in bed gap: 115 mm Spindle taper: MT 5 Spindle mount: Camlock ASA D1-4 Spindle bore: 38 mm Top slide travel: 85 mm Cross slide travel: 165 mm Gujdpfxow A Rczo Ab Tjk Tailstock taper: MT 3 Tailstock quill stroke: 110 mm Longitudinal feed (32): 0

Stanje: novo, WORKING AREA – TURNING - Max. swing diameter: 470 mm - Max. turning diameter: 235 mm - Max. workpiece length: 1000 mm BED GAP / BRIDGE - Swing diameter in the bed gap: 690 mm MAIN SPINDLE - Spindle bore: 58 mm - Spindle speed range from: 20 rpm - Spindle speed range up to: 2000 rpm - Number of gear steps: 12 - Spindle diameter: 58 mm LEAD AND FEED SCREW - Longitudinal feed (z) from: 0.05 mm/rev - Longitudinal feed (z) to: 0.82 mm/rev - Cross feed (x) from: 0.02 mm/rev - Cross feed (x) to: 0.4 mm/rev TAILSTOCK - Quill taper: MT 4 ELECTRICAL DATA - Total power consumption: 5.5 kW Gusdpfx Aefcqtcob Tek DIMENSIONS / WEIGHT - Footprint (left/right): 1900 mm - Footprint (front/back): 810 mm - Overall height: 1220 mm - Total weight: approx. 1800 kg The machine is available with between-centres distances from 760 mm to 2000 mm. This offer is for a stock machine at a special price (New price incl. these options: 28,962.-?) The machine is in stock in 6500 Landeck / TYROL and can be inspected under power. We will be pleased to send you a non-binding quotation with your desired detailed specifications. --> The description as well as standard and special equipment can be found in the PDF file. This stock machine is equipped as follows: Including the following standard accessories, among others: - Triple-bearing precision spindle with SKF (FAG) bearings - Mechanical spindle brake - Complete electrical equipment - Coolant system with rear splash guard and splash guard on the carriage - Chuck guard - Shift rod with 3 adjustable cams - Fixed centre - Covered leadscrew - Set of machine leveling pads - 24 V machine lamp - Operating manual with inspection protocol - CE declaration of conformity Including special accessories, among others: Article No. 5200 B Tool holder head B, type Multifix (without tool holder) Article No. 6405 DA3A-470-1000 Digital position display ARBAH (Made in EU) 1 for SJ-470/1000S, including counter, 3 scales, stand, covers, and installation Article No. 5300 3544-250-6 3-jaw chuck BISON, steel body, Ø 250 mm, Camlock D-6, self-centering, bore Ø 76 mm with one set each of one-piece hard and soft jaws

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 220 mm, izvrtina vretena: 50 mm, premer struženja: 400 mm, premer struženja nad ležiščem sani: 400 mm, premer struženja nad zgornjim sanežem: 220 mm, višina središča: 200 mm, stružna dolžina: 1.000 mm, Stružnica z odmikom v ležišču TOS SN 40B Model: SN 40B Premer nad ležiščem: 400 mm Premer nad vozičkom: 220 mm Premer v izrezu: 600 mm Gjdjxxyy Sjpfx Ab Tjuk Razdalja med konicama: 1000 mm Hitrosti vretena: 22 – 2000 min⁻¹ Premer vretena: 50,8 mm Motor: 5,5 kW Stroj je opremljen z: 3-čeljustna glava 4-čeljustna glava Hitroizmenljiv nosilec orodja Fiksna luneta

Stanje: skoraj kot novo (rabljeno), Horizontalni stružnica - rabljena Premer struženja nad posteljo (mm): 385 Gujdpfx Aeg R Sm Ijb Tjk Razdalja med konicama (mm): 900 Premer vretena (mm): 51,5 Maks. premer struženja nad prečno sani (mm): 220 Obrati/min (RPM): 38 - 1600 (16x) Moč (kW): 2,94 Napetost (V): 380 Frekvenca (Hz): 50

Stanje: zelo dobro (rabljeno), Leto izdelave: 1972, Natančni stružni stroj, stružnica, stružniška klop, stružnica z vodilnim in vijačnim vretenom -Proizvajalec: VDF Heidenreich & Harbeck, stružnica z vodilnim in vijačnim vretenom, tip 24R0 -Strojna postelja: kaljena Gujdpfxjw Sxgxj Ab Tjk -Stružna dolžina: 1230 mm -Premer struženja nad posteljo: 500 mm -Premer struženja nad izrezom: 355 mm -Premer struženja nad suportom: 290 mm -Vrtina vretena: Ø 56 mm -Število vrtljajev vretena: 19 - 2000 obr/min -Klinasta glava: Forkardt Ø 250 mm -Konus konjička: MK4 -Pogon: 5,5 kW -Dodatki: 1x podporni nosilec, 7x Multifix nosilcev orodij, glej fotografije -Dimenzije: 1180/3050/V1345 mm -Teža: 1907 kg

Stanje: novo, Natančni vodilno-vlečni stružnica Proizvajalec: OPTiturn Model: TM 3310 D Kataloška št.: 3403025 Stanje: Novi stroj Višina konice: 165 mm Razmak med konicami: 1.000 mm Hitrost vretena: 65 - 2.000 min⁻¹ (9 stopenj) Serijska oprema: Gsdpoh I N Sbjfx Ab Tsuk - 3-osni digitalni prikazovalnik DPA 31 PLUS - Trivraten 160 mm vpenjalni tulec - Električno zavorni glavni motor - Podstavek stroja z lovilcem ostružkov - Štirikratni nosilec orodja - LED strojna svetilka - Redukcijski tulec MK 5/MK 3 - Fiksna centrirna konica MK 3 - Električno varovana zaščita vpenjalnega tuleca - Set izmenjalnih zobnikov - Oljno polnjenje - Orodje za upravljanje - Navodila za uporabo

Stanje: rabljeno, Swing diameter over bed: 410 mm Swing diameter over cross slide: 240 mm Turning length: 1000 mm Guodpfx Aevcrmcsb Tjk Centre height: 205 mm Centre distance: 1000 mm Spindle bore: 47 mm Spindle speeds: 28 - 1250 rpm Feeds - longitudinal: 0.03 - 8.8 mm/rev Feeds - cross: 0.006 - 1.84 mm/rev Threads - metric pitch: 0.25 - 76 mm Threads - imperial: 1/2 - 152 TPI Threads - module: 0.25 - 22 mm Bed width: 320 mm Tailstock quill diameter: 55 mm Tailstock taper: MT 4 Cross slide travel: 290 mm Top slide travel: 120 mm Total power requirement: 5.5 kW Machine weight approx.: 1.3 t Machine dimensions (L x W x H): 2.32 x 1.15 x 1.22 m Accessories: RÖHM 3-jaw chuck 160 mmø, MULTIFIX toolpost with 2 tool holders, stationary steady rest, centre, coolant system

Stanje: novo, Turning diameter: 325 mm Turning length: 1000 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 440 mm Speeds: 12 (85-2000) rpm Tailstock MT 3 Quill stroke: 100 mm Quill diameter: 40 mm Spindle mount: DIN 55027 No. 5 Spindle bore: 32 mm Longitudinal feed: 0.006 - 1.77 m/min Cross feed: 0.003 - 0.885 m/min Total power requirement: 2.2 kW Machine weight approx.: 770 kg Gedetycpaepfx Ab Teuk Space requirement approx.: 2150 x 950 x 1350 mm Equipment: - Coolant system - Machine lamp - Chip guard rear wall - Spindle guard - Chuck guard - Tool holder guard - Change gears *Special equipment: - 3-jaw chuck Ø 160 mm Type 3204/ DIN6350, BISON - MULTIFIX quick-change tool post Type A, incl. 4 tool holders - 2-axis digital readout DRO Newall - Foot pedal with brake function CE

Stanje: novo, Bernardo Universal Lathe Solid 460 x 2000 Pro Vario Gjdpfjxl Tcmsx Ab Tjuk Technical Specifications Centre distance: 2000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feeds (42): 0.055 – 3.065 mm/rev Cross feeds (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill travel: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1370 mm Weight approx.: 2030 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Stepless speed control; the set speed is shown on a digital display • Hardened and ground gears and shafts, also in the feed gearbox • Standard with rapid traverse (longitudinal and cross) to reduce non-productive times • Central, user-friendly control for feeds and threads, with leadscrew and feed shaft • Gears are oversized, hardened, and precision ground • Speed and feed adjustment is simple, smooth, and precise • The machine bed is cast in one piece, extremely torsion-resistant and low in vibration, meeting key requirements for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – through-hole diameter max. 150 mm • Travelling steady rest – through-hole diameter max. 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change toolpost with 4 holders • Safety guard for quick-change toolpost • Foot pedal with brake function (CE compliant) • Coolant system • Frequency inverter • Slip clutch • Rapid traverse (longitudinal and cross) • Change gears • Reducing sleeve • 2 centre points • Thread dial • LED machine lamp • Chip guard (rear wall) • Operating tools

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1980, Funkcionalnost: nepreverjeno, številka stroja/vozila: C20018, izvrtina vretena: 53 mm, premer struženja: 460 mm, premer struženja nad ležiščem sani: 240 mm, stružna dolžina: 1.000 mm, največja hitrost vretena: 2.000 obr/min, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! TEHNIČNI PODATKI Vrtina vretena: 53 mm Obratovalni premer: 460 mm Premer nad sanmi: 240 mm Dolžina struženja: 1.000 mm Hitrost vrtenja: 32 – 2.000 o/min PODROBNOSTI STROJA Skupna dolžina: 2.200 mm Skupna širina: 1.000 mm Skupna višina: 1.300 mm OPREMA - Konjiček Gsdpjw Ngqyjfx Ab Touk - Štirivalentna vpenjalna glava, premer: 200 mm

Stanje: novo, Precizni vodilni in vlečni vretenasti stružnica Proizvajalec: OPTIMUM Model: OPTiturn TZ 4V Gusdpfjg Hkmrsx Ab Tok Art. št.: 3432245 Stanje: Nov stroj Višina konice: 200 mm Razdalja med konicama: 800 mm Obratov: 50 - 3.000 min⁻¹ brezstopenjsko nastavljivo prek 2 stopenj menjalnika s SIEMENS inverter variabilnim pogonom Standardna oprema: - 3-osni digitalni prikazovalnik DPA 32 - digitalni prikazovalnik vrtljajev na vretenu - fiksni centrirni konus MK 3 - hitromenjalni nosilec orodja velikost B - nosilec stružnega noža BD - redukcijski tulec MK 6 / MK 3 - fiksna luneta ø 10 - 130 mm - gibljiva luneta ø 10 - 100 mm - hladilna naprava - izvlečna posoda za ostružke - LED strojna svetilka - servisno orodje

Stanje: novo, Swing diameter 760 mm Turning length 3000 mm Swing diameter over bed slide 520 mm Guedpfeqv Iw Tjx Ab Tek Centre height 380 mm Spindle speeds 17 (7.5 - 1015) rpm Tailstock Morse taper MK6 Quill stroke 225 mm Quill diameter 105 mm Spindle bore 132 mm Longitudinal feed 0.039 - 18 mm/min Cross feed 0.02 - 9 mm/min Total power requirement 15 kW Machine weight approx. 4700 kg Space required approx. 4900 x 1650 x 1650 mm Equipment: - Coolant system - Machine lamp - Chip guard (rear wall) - Spindle guard - Chuck guard - Tool holder guard - Change gears *Special equipment - 3-jaw chuck Ø 400 mm, type 3204/DIN6350, BISON - MULTIFIX quick-change tool post type C, incl. 4 tool holders - 3-axis digital readout DRO Newall - Foot pedal with brake function CE

Stanje: novo, Bernardo Universal Lathe Solid 460 x 1000 Pro Vario Technical Specifications Centre distance: 1000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 270 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Spindle speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feed range (42): 0.055 – 3.065 mm/rev Cross feed range (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Imperial threads (60): 2 – 112 TPI Tailstock quill diameter: 60 mm Tailstock quill travel: 130 mm Tailstock taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (L x W x H): 2300 x 1080 x 1600 mm Weight approx.: 1730 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control, set speed readable on digital display • Hardened and ground gears and shafts, including in the feed gearbox • Rapid traverse (longitudinal and cross) as standard to reduce idle times • Central, ergonomic controls for feeds and threading, with lead screw and feed shaft • Gears are large, hardened, and ground to precision • Speed and feed adjustment is simple, smooth, and precise • The machine bed is cast in one piece, extremely torsion-resistant and low-vibration, providing the basis for precise turning operations Scope of delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – max. passage diameter 150 mm • Travelling steady rest – max. passage diameter 110 mm • First fill with Shell Tellus 46 • Faceplate 450 mm • Quick-change tool post with 4 holders • Safety guard for quick-change tool post • Foot pedal with brake function according to CE Guedpfx Abjxl Tcaj Tok • Coolant system • Frequency inverter • Safety slip clutch • Rapid traverse (longitudinal and cross) • Change gears • Reducing sleeve • 2 centre points • Thread dial indicator • LED machine light • Chip guard at rear • Operating tools

Stanje: novo, Natančen vodilni in povlečni vretenast stružnica Znamka: OPTiturn Model: TH 4210 Art. št.: 3462050 Stanje: Nova naprava Višina konice: 210 mm Razdalja med konicami: 1.000 mm Gedpfx Abjdbgxcj Tjuk Standardna oprema: - Podstavek stroja - Štirikotni nosilec za orodje - LED strojna svetilka - Redukcijska puša MK 6/MK 4 - 2 fiksni centrirni konici MK 4 - Fiksna luneta, 15–105 mm - Sledilna luneta, 10–65 mm - Zaščitni pokrov za vpenjalno glavo, električno zaščiten - Naprava za hlajenje - Komplet menjalnih zobnikov - Oljno polnjenje - Orodje za upravljanje - Navodila za uporabo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1983, Turning length 1500 mm Turning diameter 475 mm Turning diameter over cross slide 290 mm Swing in gap 655 mm Speed range 14.0 – 2000 rpm Longitudinal feed 0.05 – 0.736 mm/rev Spindle bore 61.0 mm Tailstock taper MK 4 Quill travel 200 mm Quill diameter Ø 70.0 mm Spindle nose DIN 55022 Gr. 6 Gjdjxfwc Ropfx Ab Tsuk Voltage 380 V Total power requirement 7.5 kW Weight 2400 kg Dimensions (LxWxH) 3080 x 1160 x 1485 mm From a maintenance workshop (university hospital) In good condition (!!) With original documentation and machine card Equipment: - Sturdy electro-mechanical conventional lathe - KLOPFER 4-jaw chuck Ø 200 - MULTIFIX tool post with 3 holders - Movable tool post guard - Adjustable bed stop - Machine bed with removable bridge (gap) - Sliding tailstock incl. live center - Swiveling machine lamp - Machine leveling feet - Swarf guard (rear, sliding) - Emergency stop button at front - Original operating manual and machine card

Stanje: novo, Bernardo Universal Lathe Smart 410 x 1500 Pro Vario Godpfx Aoxl Ta Seb Touk Technical Specifications Centre Distance: 1500 mm Centre Height: 210 mm Swing over Bed: 420 mm Swing over Gap: 580 mm Swing over Cross Slide: 255 mm Bed Width: 250 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1 – 6 Speed Range, 2 Stages: 30 – 550 / 550 – 3000 rpm Longitudinal Feed Range (17): 0.05 – 1.7 mm/rev Cross Feed Range (17): 0.025 – 0.85 mm/rev Metric Threads (42): 0.2 – 14 mm Imperial Threads (45): 2 – 72 TPI Quill Diameter: 50 mm Quill Travel: 140 mm Quill Taper: MK 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (W x D x H): 2590 x 1050 x 1600 mm Weight approx.: 1325 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control; the set speed is displayed digitally • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly feed and threading controls with lead and feed shaft • Modern headstock bearings with high-precision angular contact ball bearings • Equipped as standard with frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, including the feed gearbox • Simple, smooth, and precise speed and feed adjustment • Traversable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap enables machining of large-diameter workpieces Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Faceplate 350 mm • Fixed steady rest – max. Ø 135 mm • Travelling steady rest – max. Ø 65 mm • Foot pedal with brake function according to CE • Four-way tool post • Safety device for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • Initial fill with Shell Tellus 46 • Coolant system • Slip clutch • Threading dial • LED machine lamp • Change gears • Reducing sleeve • 2 centres • Chip guard • Operating tools

Stanje: novo, Bernardo Universal Lathe Smart 410 x 1000 Pro Vario Technical Specifications Centre Distance: 1000 mm Centre Height: 210 mm Swing Over Bed: 420 mm Swing Over Gap: 580 mm Swing Over Cross Slide: 255 mm Bed Width: 250 mm Spindle Bore: 52 mm Spindle Mount: DIN 55029, D1 – 6 Speed Range, 2 Steps: 30 – 550 / 550 – 3000 rpm Longitudinal Feeds (17): 0.05 – 1.7 mm/rev Cross Feeds (17): 0.025 – 0.85 mm/rev Metric Threads (42): 0.2 – 14 mm Imperial Threads (45): 2 – 72 TPI Quill Diameter: 50 mm Quill Travel: 140 mm Quill Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Gjdpfx Asxl Tarob Tjuk Machine Dimensions (W x D x H): 2090 x 1050 x 1600 mm Approx. Weight: 1145 kg Features • Supplied as standard with Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Infinitely variable speed control; set speed is shown on digital display • Prism bed made of cast iron, inductively hardened and precision ground • Central, user-friendly controls for feeds and threading via leadscrew and feed shaft • Modern main spindle bearing with precision angular contact bearings • Standard equipment includes frequency inverter and 3-axis digital readout • Hardened and ground gears and shafts, also in the feed gearbox • Speed and feed selection are simply designed, smooth, and precise to operate • Sliding tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable bridge allows machining of workpieces with large diameters Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw steel chuck PO3-200 mm / D6 • Face plate 350 mm • Fixed steady rest – max. passage diameter 135 mm • Travelling steady rest – max. passage diameter 65 mm • Foot pedal with CE brake function • Four-way tool post • Safety guard for four-way tool post • Micrometer longitudinal stop • Turret stop with fine adjustment • Frequency inverter • Initial filling with Shell Tellus 46 • Coolant system • Slip clutch • Thread dial indicator • LED machine lamp • Change gears • Reducing sleeve • 2 centre points • Chip guard • Operating tools

Stanje: novo, Bernardo Universal Lathe Solid 460 x 2000 Pro Technical Specifications • Distance between centers: 2000 mm • Center height: 230 mm • Swing over bed: 460 mm • Swing over gap: 690 mm • Swing over cross slide: 270 mm • Bed width: 300 mm • Spindle bore: 80 mm • Spindle mount: DIN 55029, D1-8 Gujdpfjxl Dzasx Ab Tek • Speed range (12 steps): 25 – 1700 rpm • Longitudinal feed range (42 steps): 0.055 – 3.065 mm/rev • Cross feed range (42 steps): 0.025 – 1.386 mm/rev • Metric threads (41): 0.1 – 14 mm • Inch threads (60): 2 – 112 TPI • Quill diameter: 60 mm • Quill travel: 130 mm • Quill taper: MT 4 • Motor power: 5.5 kW (7.5 HP) • Machine dimensions (W x D x H): 3250 x 1080 x 1600 mm • Weight: approx. 1995 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Hardened and ground gears and shafts, including in the feed gearbox • Central, user-friendly control for feeds and threads via leadscrew and feedscrew • Large-sized, hardened, precision-ground gears • Simple, smooth and precise speed and feed adjustment • Rapid traverse in longitudinal and cross axes as standard for reduced non-productive times • One-piece cast machine bed, extremely rigid and low in vibration, ensuring high precision turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Faceplate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. workpiece diameter 150 mm • Follow rest – max. workpiece diameter 110 mm • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Motor with magnetic brake according to CE standards • Foot pedal with brake function according to CE • Slip clutch • Rapid traverse for longitudinal and cross travel • Change gears • 2 dead centers • Reducing sleeve • Thread chasing dial • LED machine lamp • Chip guard (rear) • Operating tools