Center stružnica

Bernardo Solid 460 x 2000 Pro

Stanje: novo, Bernardo Universal Lathe Solid 460 x 2000 Pro Vario Technical Specifications Centre distance: 2000 mm Centre height: 230 mm Swing over bed: 460 mm Swing over gap: 690 mm Swing over cross slide: 274 mm Bed width: 300 mm Spindle bore: 80 mm Spindle mount: DIN 55029, D1-8 Speed range: 25 – 250 / 250 – 1700 rpm Longitudinal feeds (42): 0.055 – 3.065 mm/rev Cross feeds (42): 0.025 – 1.386 mm/rev Metric threads (41): 0.1 – 14 mm Inch threads (60): 2 – 112 TPI Quill diameter: 60 mm Quill travel: 130 mm Quill taper: MT 4 Motor power: 5.5 kW (7.5 HP) Machine dimensions (W x D x H): 3250 x 1080 x 1370 mm Weight approx.: 2030 kg Features • Modern main spindle bearing with precision angular contact ball bearings • Standard Delta frequency inverter for high torque at low speeds and nearly constant speed under load • Stepless speed control; the set speed is shown on a digital display Ijdpfx Asxl Tcmjgpja • Hardened and ground gears and shafts, also in the feed gearbox • Standard with rapid traverse (longitudinal and cross) to reduce non-productive times • Central, user-friendly control for feeds and threads, with leadscrew and feed shaft • Gears are oversized, hardened, and precision ground • Speed and feed adjustment is simple, smooth, and precise • The machine bed is cast in one piece, extremely torsion-resistant and low in vibration, meeting key requirements for accurate turning Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Fixed steady rest – through-hole diameter max. 150 mm • Travelling steady rest – through-hole diameter max. 110 mm • Initial fill with Shell Tellus 46 • Face plate 450 mm • Quick-change toolpost with 4 holders • Safety guard for quick-change toolpost • Foot pedal with brake function (CE compliant) • Coolant system • Frequency inverter • Slip clutch • Rapid traverse (longitudinal and cross) • Change gears • Reducing sleeve • 2 centre points • Thread dial • LED machine lamp • Chip guard (rear wall) • Operating tools

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 330 mm, izvrtina vretena: 78 mm, premer struženja nad ležiščem sani: 520 mm, višina središča: 260 mm, stružna dolžina: 1.500 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.670 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 2.135 kg, nosilec puše: MK 4, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Centre height: 260 mm Centre distance: 1500 mm Spindle bore: 78 mm Spindle nose: DIN 55029 Camlock D8 Spindle speed range: 20–2000 rpm Drive power: 7.5 kW Weight approx. 2135 kg Equipment includes: - Infinitely variable speed control - Hardened and precision ground Z-axis guideways - Turcite coatings (on mating surfaces) of cross and top slides - Manual central lubrication with a pump for longitudinal and cross slides - Complete coolant system with rear splash guard and slide splash guard Ijdpfxjctutms Agpea - Chuck guard - Switching rod with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine levelling pads

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rabljeni stružnica TOS SUI 50 - 1500 s številnimi dodatki naprodaj Prodamo robusten in natančen stružnica TOS SUI 50 - 1500 – idealen za delavnice, obdelavo kovin in izkušene mojstre. 🔹 Razdalja med konicami: 1500 mm 🔹 Premer struženja nad posteljo: 500 mm 🔹 Hitrost vretena: 14 – 2240 vrt/min 🔹 Vrtina vretena: 56 mm 🔹 Dimenzije (DxŠxV): 3000 x 1300 x 1500 mm 🔹 Teža: približno 2,9 tone ✅ Stroj je rabljen, a tehnično v dobrem stanju in takoj pripravljen za uporabo. 📍 Lokacija: Werdau Ijdpjwu Dn Ijfx Agpsa 📅 Možen ogled – preprosto se dogovorite za termin! Za več informacij pišite ali pokličite.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 270 mm, izvrtina vretena: 52 mm, premer struženja: 500 mm, največja hitrost vretena: 1.000 obr/min, največja hitrost vrtenja: 2.200 obr/min, vrtljajska hitrost (min.): 22 obr/min, skupna masa: 1.940 kg, Zrepasovaný univerzálny sústruh SN 50 Classic–2000 mm Hlavné vlastnosti: – jednoduché a ergonomické ovládanie – ručne zaškrabované presné plochy – vysoká presnosť obrábania – dlhá životnosť – nízke prevádzkové náklady – jednoduchá údržba – možnosť rezania rôznych typov závitov so širokým rozsahom stúpania Technické parametre: Max. točný priemer nad ložom: 500 mm Iodpfjxghvwsx Agpsa Max. točný priemer nad suportom: 270 mm Vzdialenosť medzi hrotmi: 2000 mm Vreteno: Rozsah otáčok: 22–2000 min⁻¹ Priemer priechodu vretenom: 52 mm Pohony: Celkový príkon: 6,6 kVA Výkon hlavného motora: 5,5 kW Výkon čerpadla chladiacej kvapaliny: 0,1 kW Výkon pre rýchloposuv: 0,55 kW Rozmery: Celková dĺžka: 3640 mm Šírka: 1100 mm Výška: 1580 mm Hmotnosť: 1940 kg Štandardné príslušenstvo stroja: Verzia CE: Kryt skľučovadla Ø 315 mm s koncovým spínačom, predný zástena na triesky, zadný pohyblivý kryt, kryt posuvového skrutkového hriadeľa. Metrícka konfigurácia. Upínacia plocha vretena: bajonet B6 Priemer priechodu vretena: 52 mm Štvorpolohová revolverová hlava na nástroje Elektrická inštalácia pre 3 × 400 V / 50 Hz (verzia s ističom) Ovládanie suportu na pravej strane Vybranie v loži pre zväčšený točný priemer (Ø 700 mm na 230 mm od vretena) Rýchloposuv Koník Hlavný pohon 5,5 kW Zberná vaňa na triesky + systém chladenia Pracovné osvetlenie LED Sklopné páky osí X a Z Farba: RAL 7035-3 / 7016-3 / 6153 Sada ozubených kolies pre rezanie závitov Strižné kolíky (3 ks) Tlačený používateľský manuál

Stanje: novo, Swing diameter 560 mm Turning length 1910 mm Swing diameter over bed slide 355 mm Swing diameter in bed bridge 790 mm Centre height 280 mm Turning length in bed bridge 170 mm Spindle speeds 12 (25-1600) rpm Tailstock taper MK 5 Quill stroke 180 mm Quill diameter 75 mm Spindle mount DIN ISO 702-2 No. 8 Spindle bore 80 mm Iedpfeucgr Iex Agpoa Spindle taper MK 7 Longitudinal feed 35 / 0.059 - 1.646 m/min Face feed 35 / 0.020 - 0.573 m/min Total power requirement 8.5 kW Machine weight approx. 2,560 kg Space requirement approx. 3450 x 1150 x 1650 mm Item no. 3462170 Heavy-duty machine featuring high flexibility, precision, and cost efficiency. Equipped with DPA 31 Plus digital position display and quick-change tool post. Description: - Hardened and ground Z-axis guideways - Guaranteed spindle nose run-out accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 8 - Leadscrew cover - Precisely machined carriage - All guides adjustable via gib strips - Forward/reverse operation on carriage, switchable via leadscrew - Dual-channel safety electronics - Central lubrication in the carriage - Cross slide adjustment range ±90° - Main spindle runs in oil bath - Shafts and gears run in oil bath - Gear wheels easy-running, hardened, ground, and mounted in 2 adjustable precision tapered roller bearings - Switches with life cycle calculation, tested according to EN ISO 13849 - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - Safety handwheels with disengagement function per EN 23125 on X and Z axes - Gears and shafts hardened and ground, running in precision bearings in oil bath - Clearly arranged selection levers for feed speed selection - Enclosed rapid-change feed gearbox design - Emergency stop slam switch, motor protection switch, lockable main switch - Emergency stop device, foot-operated - Tailstock for taper turning, adjustable ±10 mm - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm; quick, easy, and tool-free adjustment using clamping lever - Cable carrier for gentle cable and hose guidance - Heavily ribbed prismatic bed, induction-hardened and precision-ground cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy, complete draining and cleaning per DIN - Thread dial indicator scale adjustable Scope of delivery: - Fixed steady rest, max. passage Ø 165 mm - Travelling steady rest, max. passage Ø 95 mm - LED machine lamp - TH 5615D-TH 5630D: Reducing sleeve MK 7/MK 5 - TH 5620V: Reducing sleeve Ø113 mm / MK 5 - Fixed centre MK 5 - Fixed and revolving centre MK 5 - Quick-change tool post 7-C - Tool holder 32 x 150 type D for square tool bits - Thread dial indicator - Initial machine fill with quality oil - Change gear set - Operating tools Special accessories included: - OPTIMUM 3-jaw chuck, centric clamping, Ø315 mm, Camlock DIN ISO 702-2 No. 8 (Item no. 3442768)

Stanje: rabljeno, Tehnične podrobnosti: Premer struženja nad posteljo: 560 mm Premer struženja nad suportom: 280 mm Dolžina struženja: 2000 mm Višina konic: 280 mm Razdalja med konicami: 1600 mm Izvrtina glavnega vretena: 65 mm Območje vrtljajev: 9...1800 / 24 stopenj min⁻¹ Vzdolžni pomik: 0,025-0,09 mm/obrat Ijdpfewa I Shex Agpsa Prečni pomik: 0,012-0,045 mm/obrat Pomik pinole konjička: 225 mm Priključek konjička: MK5 Skupna priključna moč: 18 kW Teža stroja pribl.: 3,8 t Mere stroja (DxŠxV): 3,7 x 1,6 x 2,05 m Trivpenjalni vpenjalni tulec D=320 mm Zgornji suport vrtljiv ±45°

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 438 mm, izvrtina vretena: 85 mm, premer struženja nad ležiščem sani: 660 mm, višina središča: 330 mm, stružna dolžina: 1.500 mm, poteza s peresom: 165 mm, premer tulec: 85 mm, največja hitrost vretena: 1.500 obr/min, hitrost vretena (min.): 15 obr/min, širina postelje: 400 mm, nosilec puše: MK 5, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Centre height: 330 mm Centre distance: 1,500 mm Spindle bore: 85 mm Spindle nose to DIN 55029: Camlock D8 Isdpfxem E Umij Agpea Number of gearbox speeds: 12 Spindle speed range: 15–1,500 rpm Drive power: 11 kW Weight approx. 2,135 kg Equipment includes: - Each gearbox speed is steplessly adjustable from 50% to 100% - Hardened and precision-ground Z-axis guideways - Turcite coatings (on counter-surface) of the cross and compound slide - Manual central lubrication with one pump for longitudinal and cross slides - Complete coolant system with rear splash guard and splash protection on the slide - Chuck guard - Shift rod with 3 adjustable cams - Machine lamp - Fixed live centre - Set of machine leveling plates

Stanje: novo, Centre height: 250 mm Swing diameter over cross slide: 350 mm Swing diameter in gap: 695 mm Distance between centers: 1,500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide travel: 272 mm Top slide travel: 155 mm Spindle bore: 80 mm Speed range, stepless: (3) 30 - 2,200 rpm Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14 mm Diametral pitch threads: (21) 8 - 44 D.P.I Module threads: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/rev Cross feeds: 0.02 - 0.50 mm/rev Isdpfxjgt E Ile Agpoa Motor power: 5.5 kW Dimensions (LxWxH), approx.: 2,900 x 1,175 x 2,040 mm Weight, approx.: 2,200 kg Features: - Toolmaker’s accuracy - Stepless speed control (3 headstock ranges) - Dynamically balanced main spindle - Rigid machine bed with hardened and ground guideways - One-piece cast iron base - Adjustable precision tapered roller bearings in main spindle - Easy-to-operate feed gearbox with wide feed range in fully enclosed oil bath - Low-maintenance central lubrication - Removable gap bridge - CE certified Equipment: - 3-axis digital readout (resolution 0.005 mm) - Frequency inverter - Machine stand with high splash guard and integrated lighting - Front pull-out chip tray - 3-jaw chuck - Fixed steady rest - Travelling steady rest - Micrometer bed stop - Oil cooler - Two emergency stop buttons and foot pedal with electric braking system - Safety interlocked chuck guard, tool post guard, and lead & feed screw covers compliant with CE European safety standards - Coolant system - Fixed centre - Reducing sleeve for main spindle - Operating tools in toolbox

Stanje: zelo dobro (rabljeno), Maximum turning diameter over bed: 575 mm Maximum turning diameter over carriage: 525 mm Maximum turning diameter over cross slide: 300 mm Distance between centers: 2000 mm Spindle bore diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Maximum cross slide travel: 305 mm Maximum top slide travel: 140 mm Isdpewlgdyefx Agpsa Maximum tailstock quill travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, premer struženja: 500 mm, premer struženja nad ležiščem sani: 500 mm, stružna dolžina: 2.000 mm, SUI 50/2000 – premer struženja 500 mm, dolžina struženja 2000 mm Isdpfow N D Trox Agpsa