Center stružnica

OPTIMUM OPTIturn TM 3310 D

Stanje: novo, Leto izdelave: 2025, Metal lathe TYTAN 750 VARIO, 230V with stepless spindle speed adjustment. Machining parameters: 250 x 750 mm, DC motor: 1.1 kW / 230V. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking, and reaming. Typically used in small industrial plants, workshops, garages, etc. Main advantages: - Modern DC motor with infinitely variable spindle speed control ensures user convenience and shortens calibration time. - LCD display for spindle speed allows monitoring and quick adjustment during cutting and threading operations. - Two spindle speed ranges: low (50-1125 rpm) for machining hard steels and high (100-2250 rpm) for precision turning at high speeds. - Thread cutting capabilities: metric – 18 types (0.2-3.5mm), imperial – 21 types (8-56 TPI), with the ability to cut both right- and left-hand threads. - Automatic longitudinal feed with 6 speed ranges (0.07 to 0.40 mm/rev) significantly reduces machining time without compromising the quality of long workpieces. - The machine is fully compliant with EU directives (CE) and Polish as well as DIN standards. Technical specifications: 3-jaw chuck: 125 mm Max turning diameter over bed: 250 mm Turning diameter over cross slide: 150 mm Turning length between centers: 750 mm Djdpfx Aasw H Raus Howf Max installed part length (chuck/center): 700 mm Bed width: 135 mm Tool post dimensions: 65 x 65 x 20 mm Max tool dimensions: 12 x 12 mm Spindle bore: 30 mm Spindle taper: MT4 Spindle speed adjustment: stepless (L/H) Spindle speed ranges: L: 50–1125 / H: 100–2250 rpm No. and range of metric threads: (18) 0.2–3.5 mm/rev No. and range of imperial threads: (21) 8–56 T.P.I. No. and range of longitudinal feeds: (6) 0.07–0.4 mm/rev Compound slide travel: 70 mm Longitudinal travel: 650 mm Cross slide travel: 135 mm Tailstock quill diameter: 30 mm Tailstock quill travel: 60 mm Tailstock taper: MT2 Motor power S1/S6: 1.1/1.32 kW / 230 V Dimensions (L/W/H) without stand: 1310 x 610 x 490 mm Dimensions (L/W/H) with stand: 1350 x 560 x 1250 mm Weight without stand: 165 kg Weight with stand: 180 kg Standard equipment: - 3-jaw chuck (125 mm) - Fixed and travelling steady rests - Change gears - Fixed center MT2 - Fixed center MT4 - Left and right jaws (1 set) - Oil gun - Chip tray - Chuck and tool post keys - Set of service tools - Safety guards compliant with CE standards

Stanje: rabljeno, Leto izdelave: 1980, Drilling capacity in steel (diameter): 23 mm X-travel: 400 mm y-travel: 285 mm Dsdpfxet Hw Sbj Aa Howf Total power requirement: 3 kW Machine weight approx.: 1,400 kg A C I E R A (Switzerland) Semi-automatic precision drilling and milling machine with BREGNARD coordinate table Model: 23 TR 50 Year of manufacture: approx. 1980 #36586 X-axis (longitudinal): 400 mm Y-axis (transverse): 285 mm Z-axis (vertical, quill): 120 mm W-axis (drilling head slide): 470 mm Table size: 520 x 410 mm Min./Max. distance vertical spindle to table top: 230 / 700 mm Table traverse approx.: 280 mm Spindle overhang approx.: 270 mm Spindle speeds (infinitely variable in 2 ranges): 45 – 4,000 rpm Spindle mount: SF 32 Drilling capacity in steel: 23 mm Feed rates: 0.1 / 0.04 / 0.02 mm/rev 0.6 / 0.25 / 0.12 mm/rev Workpiece weight approx.: 300 kg Spindle drive: 2.5 kW Total drive approx.: 3 kW - 400 V - 50 Hz Weight approx.: 1,400 kg Accessories / Special Equipment: • BREGNARD precision coordinate table TR 50 for X/Y axes with pneumatic rapid traverse via hand switch, longitudinal travel 400 mm / cross travel 285 mm • Automatic drilling feed with shut-off, simple depth stop • Electrical control panel with buttons for rapid adjustment of the drill head, shut-off at upper quill position, etc. • Many tool holders with special taper mount, clamping tools, drill chuck • Integrated coolant system, central lubrication, foldable chip guard • Machine lamp Condition: good – ready for demonstration, ideal machine for single parts and small batches, very robust construction. Please click here soon for a video of the machine. Delivery: ex stock - as inspected Payment: strictly net – upon receipt of invoice

Stanje: dober (rabljeno), Leto izdelave: 2010, LZ Lathe, Manufacturer: JET, Model: GHB-1330, Year of manufacture: 2010 Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix tool post size A, 2 steady rests, and coolant system. Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Dwedpfxsqwgzqs Aa Hjf Spindle bore: 38 mm The machine is in good condition, coming from a training workshop. Machine documentation is available.

Stanje: novo, Leto izdelave: 2024, Ring Bending Machine Zopf - incl. digital display - three powered rollers with smooth surface - manual adjustment of the upper roller - working position horizontal and vertical - Model ZB 30/3 MD - shafts supported with tapered roller bearings - use of interchangeable guide rails on the guide carriage Djdedktnvspfx Aa Hswf - roller diameter 76–86 mm - shaft diameter 20 mm - shaft speed 11 rpm - drive motor 0.18 kW - bending capacity round tube 30 mm - flat bar 25x6 mm - angle iron 20x20x4 mm - weight 80 kg

Stanje: novo, WM210V - ROGI VARIO METAL LATHE 230V-1Ph Swing over bed: ----- 210 mm Swing over cross slide: ----- 110 mm Centre height: ----- 105 mm Distance between centres: ----- 400 mm Bed width: ----- 100 mm Cross slide travel: ----- 75 mm Compound slide travel: ----- 55 mm Spindle bore: ----- 21 mm Spindle mount: ----- MT3 Spindle speed range: ----- variable 50 - 2500 rpm Thread cutting imperial: ----- 10 - 44 TPI (8) Dwedpfjga Txcjx Aa Hjf Thread cutting metric: ----- 0.5 - 3 mm (10) Quill travel: ----- 60 mm Quill diameter: ----- 30 mm Quill taper: ----- MT2 Motor power: ----- brushless 600 Watt Weight: ----- 75 kg STANDARD ACCESSORIES * 3-jaw 100 mm chuck - self-centering * 4-way tool post * Chip tray * Rear splash guard * Chuck guard * Leadscrew cover * Tool post guard * Change gear set * Digital speed display * Fixed centres * Forward / Reverse switch * Toolkit in case OPTIONS * 4-jaw 100 mm chuck - independent * Flange for 4-jaw 100 mm chuck * Fixed steady rest WM210V * Travelling steady rest WM210V * Faceplate WM210V * Stand/cabinet WM210V

Stanje: potreben popravila (rabljeno), Machine number: 1464 Type / Model: FUW 250/IV Travel paths x-y-z: 400 - 220 - 400 mm Table size: 630 x 350 mm Clamping area of table: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Longitudinal feed rate: 6.3 to 1,250 mm/min Cross feed rate: 6.3 to 1,250 mm/min Power supply: 7.4 kW Dodpfed Hl Stox Aa Hjwf Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1972, Natančni stružni stroj, stružnica, stružniška klop, stružnica z vodilnim in vijačnim vretenom -Proizvajalec: VDF Heidenreich & Harbeck, stružnica z vodilnim in vijačnim vretenom, tip 24R0 -Strojna postelja: kaljena -Stružna dolžina: 1230 mm -Premer struženja nad posteljo: 500 mm -Premer struženja nad izrezom: 355 mm Dwodew Sxgxspfx Aa Hof -Premer struženja nad suportom: 290 mm -Vrtina vretena: Ø 56 mm -Število vrtljajev vretena: 19 - 2000 obr/min -Klinasta glava: Forkardt Ø 250 mm -Konus konjička: MK4 -Pogon: 5,5 kW -Dodatki: 1x podporni nosilec, 7x Multifix nosilcev orodij, glej fotografije -Dimenzije: 1180/3050/V1345 mm -Teža: 1907 kg

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Dodpfxortd Uwj Aa Hjwf Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stanje: novo, Swing diameter 420 mm Turning length 1500 mm Swing diameter over cross slide 250 mm Swing diameter in the bed gap 590 mm Center height 210 mm Turning length in the bed gap 260 mm Spindle speed(s) 16 (45-1800) rpm Tailstock taper MK 4 Quill stroke 120 mm Dedok Egrpepfx Aa Hjwf Quill diameter 50 mm Spindle nose DIN ISO 702-2 No. 6 Spindle bore 52 mm Spindle taper MK 6 Longitudinal feed 17 / 0.05 - 1.7 m/min Face feed 17 / 0.025 - 0.85 m/min Total power requirement 4.6 kW Machine weight approx. 1340 kg Space requirement approx. 2440 x 915 x 1375 mm Fully equipped lead and feed screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduation 0.04 / 0.02 mm - Four-way tool post - All guides adjustable with gib strips - Top slide adjustment range ± 90° - Guaranteed spindle nose concentricity better than 0.015 mm - Main spindle runs in oil bath - Gear wheels smooth-running, hardened and ground, mounted with 2 adjustable precision taper roller bearings - Handwheels decoupled and tested to EN 23125 - Two-channel right-left selector switch tested to EN 23125 - Switches with life cycle calculation, tested to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI adjustable via control panel shift lever, no change gears required - Forward/reverse on carriage operable via shift spindle - Central lubrication in carriage - Machine base and bed cast as single Meehanite piece - Leadscrew cover - Emergency stop pedal - Safety handwheels with disengagement function in X and Z axes - Tailstock adjustable ± 10 mm for taper turning - Tailstock quill and handwheel with adjustable fine graduation 0.025 mm - Rapid, simple, tool-free adjustment via clamping lever - Strongly ribbed prismatic bed, induction-hardened and precision ground, made of cast iron - Coolant system with separate tank, fill level indicator, and oil separator; easy and complete draining and cleaning to DIN standard - LED machine lamp at chip guard Models TH 4210D and TH 4215D with digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed and glare-free - Glass linear scales Scope of delivery - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MK 6 / MK 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial machine fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw lathe chuck, self-centering, Ø 250 mm Quick-change tool post SWH5-B set

Stanje: novo, Neue Ausrüstung, hergestellt in Dänemark. Hubzeit: 18 Sekunden. Dwedpfxod Hp Efs Aa Hsf Be- und Entladen mittels Palettenhubwagen. Die Lasten werden auf eine ergonomisch korrekte Arbeitshöhe angehoben. Fernbedienung für Heben/Senken mit Not-Aus-Funktion. Leistungsaufnahme: 0,75 kW. Tragfähigkeit: 1.000 kg. Spannung: 3 x 400 V. Minimale Hubhöhe: 80 mm. Maximale Hubhöhe: 780 mm. Außenmaße: 1.420 x 1.140 mm. Innenfreiraum: 585 mm. Hub-/Senkgeschwindigkeit: 42 / 48 mm/s. Gewicht: 235 kg.