Sredinski stružnica in stružnica za vreteno

RAMO T45-10

Stanje: rabljeno, Leto izdelave: 1975, Technical Details: Swing diameter over bed: 500 mm Swing diameter over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Centre distance: 1000 mm Spindle speeds: 11.2 – 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 – 1.6 mm/rev – 32 steps Cross feeds: 0.02 – 0.71 mm/rev – 32 steps Total power requirement: 11 kW Approx. machine weight: n/a t Approx. machine dimensions (LxWxH): 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle operation) and available ex location Leipzig. Top slide swivels 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for speeds up to 2000 rpm. Thread cutting: metric, module, imperial Predjv A Sqhopfx Agpjd Chip guard Chuck guard (mechanical) MULTIFIX toolpost with Ø 40 mm boring bar holder Chip tray Coolant supply with pump Leadscrew protection Machine feet UVV (accident prevention regulation) pre-installed *

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, LZ lathe, manufacturer: KERN, type: DS 20 AL, year approx. 1970 Equipped with 3-jaw chuck Forkardt 250 mm, quick-change tool post Multifix size C with holders, and coolant system. Pedpfogqxciex Agperd Swing over bed: 500 mm Swing over cross slide: 250 mm Distance between centers: 1000 mm Spindle speeds: 12 - 1200 rpm Machine powered on and can be demonstrated under power. Good guides.

Stanje: zelo dobro (rabljeno), Univerzalni stružnica, stružnica, stružniška postelja, vodilno-vijačna stružnica -Proizvajalec: WEILER, vodilno-vijačna stružnica tip commodor 42 -Stružniško ležišče: kaljeno -Dolžina struženja: 900 mm -Premer struženja nad ležiščem: 400 mm -Premer struženja nad suportom: 190 mm Prsdpfexapm Rjx Agped -Vrtina vretena: Ø 56 mm -Vrtilna hitrost vretena: 45 - 2000 rpm -Trivočna glava: Röhm Ø 200 mm -Štirivočna glava: Röhm Ø 200 mm -Konus konjička: MK3 -Pogonska moč: 4 kW -Dodatna oprema: 18x Multifix nosilec orodja, vrteča konica, glejte slike -Dimenzije stružnice: 2200/1300/H1410 mm -Teža: 1380 kg

Stanje: novo, Leto izdelave: 2025, Roller diameter: 640 mm Throat depth: 620 mm Cutting depth: 400 mm Tilting table: yes, -0 to +15° Table size: 870 x 620 mm Band speed: 1660 m/min Motor power: 2.2 kW / 400 V Motor brake: yes / automatic Podpfx Aogtdpmogperd Extraction connection: 2 x 120 mm Machine length: 1190 mm Machine width: 780 mm Machine height: 2063 mm Weight: 320 kg

Stanje: zelo dobro (rabljeno), 200m³ stainless steel tanks Number of units: 3 180m³ stainless steel tanks Diameter: 4.70 m Height without legs: 14 m Wall thickness: 4.1 mm Base thickness: 5.1 mm We offer transport to all regions of Europe with our specialized trailer! Pedpfsfngl Nex Agperd

Stanje: dober (rabljeno), Leto izdelave: 2000, Weiler Primus VC, Year of manufacture: 2000, Pedpfx Aov Ifxiegpjrd Digital readout, Centre distance: 500 mm, Max. swing over cross slide: 150 mm, Spindle speed up to 4,000 rpm, Spindle bore: 40 mm, Spindle drive: 1.5 kW, Multifix toolholder, 24 longitudinal feeds, Metric threads, Inch threads,

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 103 mm Centre distance: 1,000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Podpfx Aod I A Dhegpsrd Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2,500 x 1,100 x 1,380 mm

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet Podpfxjvrckqs Agpord >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: rabljeno, Tornio Landonio TMU 1200 Prodeizxvkjpfx Agpsd

Stanje: dober (rabljeno), Centre height: 205 mm Centre distance: 1500 mm Swing diameter over bed: 410 mm Spindle bore: 47 mm Spindle mount: Size 6 Tailstock taper: MT 4 Spindle speeds: 28 - 1250 rpm Feeds (longitudinal/cross): 0.03-1.3 / 0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Pedpfxjv Du Ixj Agpsrd Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg