Sredinski stružnica in stružnica za vreteno

KAMI DKM 410L

Stanje: zelo dobro (rabljeno), Swing diameter over bed 1000 mm Distance between centers 2000 mm Center height 500 mm Swing diameter over cross slide 700 mm Spindle bore 128 mm Spindle speeds 6.4–1,600 rpm Ffsdpfx Afewhkdcelst SIEMENS 810 D control system Various accessories MARCELS MASCHINEN CH

Leto izdelave: 1996, Stanje: dober (rabljeno), številka stroja/vozila: 96.01112.1496, Stationary high-pressure pump unit Hammelmann HDP 112 mounted on a base frame. Comparable to, but not a Kamat, Uraca, or Woma unit. Pump type: HDP 112 Operating pressure: 300 bar Flow rate: 153 l/min Drive speed: 1500 rpm Drive power: 90 kW Equipped with VEM Motor 90 kW 3~ motor, IP55 Includes pressure regulating valve Includes safety valve Includes oil cooling system Ffsdpfxohtnnie Aflst Dimensions (LxWxH): approx. 2300 x 1000 x 1400 mm Weight: approx. 1500 kg Year of manufacture: 1996 Condition: in good used condition.

Stanje: novo, Dimensions (L x W x H): 1610 x 460 x 920 mm Fedpfx Aeu Iml Usfljft Weight: 93.5 kg Number of drawers: 20 pcs. Workshop trolley with 20 drawers and 40 mm solid wood worktop. Fixed, double ball-bearing drawer slides; anti-slip mat in each compartment. Heavy-duty rubber top mat, central locking system, 6 heavy-duty castors (125 mm), including 4 swivel castors with brakes. Central locking system for all drawers. Anti-slip mat in each compartment. Robust, double ball-bearing slides for drawers. All drawers are 100% extendable.

Stanje: novo, Leto izdelave: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range 30° right / 45° left Cutting capacity in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping 60mm Recommended options: Micro-spray system Laser line Clamping pressure regulator Ffodpfjh S Nxpjx Aflot Powered chip brush Manual lifting roller Setup elements

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Ffodpfxjfg E Hpe Aflst Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller Fedofgyicepfx Afloft • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Fodpfxefd Abas Afleft Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: novo, Dimenzije D-Š-V 1860x595x150 mm Teža 125 kg Število predalov 10 kos. Voziček za orodje z dolžino 158 cm. Delovna miza z 10 predali, vrati in zadnjo steno. Skupne mere (povsem sestavljeno) 186 x 59,5 x 149 cm. Dimenzije samo vozička za orodje z vključenimi kolesi in ročaji 186 x 56 x 94,5 cm. Mere odprtega prostora za levo vrati 40 x 52 x 54 cm. Mere desnih zgornjih 4 predalov 36,5 x 50 x 7 cm. Ffjdsu Imlbepfx Aflot Mere desnega 5. predala 36,5 x 50 x 31,5 cm. Mere levega zgornjega predala 100 x 50 x 10,5 cm. Mere levega 2. in 3. predala 61,5 x 50 x 7 cm. Mere levega 4. in 5. predala 61,5 x 50 x 15 cm. Največja nosilnost koles 175 kg na kolo (skupaj 1050 kg). Največja nosilnost na predal 30 kg. Lastna teža cca. 125 kg Dimenzije pakiranja 167 x 66 x 106 cm.

Stanje: dober (rabljeno), Spectro CIROS CCD Water Analysis Device Ffsdpfx Ajfiqn Usflot - Height: 105 cm - Width: 150 cm - Depth: 75 cm Good condition, fully functional. Can be inspected and tested on site. International shipping available. Inspection: Please note that, to avoid any misunderstandings, the item can be viewed and tested under power before purchase. If you have any questions, please ask them prior to purchasing to prevent any uncertainties. For general inquiries or to schedule a viewing appointment, I am always available at the phone number listed below. Errors in description and prior sale excepted. VAT will be shown separately on my invoices. Shipping via freight forwarder.

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 103 mm Centre distance: 1,000 mm Swing over bed: 500 mm Swing in gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Fsdpfx Aod I A Dhsfljft Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2,500 x 1,100 x 1,380 mm