Stružnica z vodilno/pogonsko vreteno, premer struženja nad posteljo 300–399 mm nakup rabljenega (212)

Stanje: novo, Leto izdelave: 2025, Universal Lathe CORMAK 310 x 900 (TU3109V), VARIO version with stepless spindle speed control. Machining parameters 310 x 900 mm, modern DC motor 1.5kW/230V, equipped with cooling system and digital readout. Recommended for machining hard steels, internal and external surface turning, taper turning, polishing, threading (metric and imperial), drilling, and broaching. Semi-professional model, designed for single-piece and small batch production. Machine version with base. The CORMAK 310 x 900 (TU3109V) 230V universal lathe, thanks to stepless spindle speed adjustment, is an ergonomic machine that meets user requirements. Reduced setup time when working on a wide range of part sizes translates into increased productivity and ease of operation. VARIO version – electronic, stepless spindle speed adjustment via direct current motor and voltage regulator, providing the highest spindle rotational accuracy and improved machining quality of finished parts. Modern DC motor with stepless spindle speed regulation ensures user convenience and shorter setup times. Smooth, efficient drive with excellent speed and torque control characteristics. LCD screen with spindle speed display allows easy monitoring and quick adjustment of spindle speed while setting cutting and threading modes. Gjdpfx Abjric Ide Tokf Two spindle speed ranges: low (80–1000 rpm) for machining hard steels, high (160–2000 rpm) for precision high-speed turning. Easy adjustment of spindle speed and automatic feed from the ergonomic control panel on the gearbox. Bed with induction-hardened, ground guideways. The suitable bed width of 180 mm ensures stable and precise operation. Wide threading range (right- and left-hand threading): metric – (18) 0.2–3.5 mm, imperial – (18) 8–48 TPI. Automatic longitudinal feed 0.085–1.832 (9) mm/rev and cross feed 0.010–0.100 (9) mm/rev – reduces machining time and improves quality when turning long workpieces. Spindle bore 38 mm provides optimal working results, allowing the machining of large-diameter shafts. Compound slide with graduation, swivel ±45°, and tailstock with ±10 mm offset for taper turning. Hardened and ground gears in the spindle gearbox. Leadscrew and feed rod for threading and automatic longitudinal and cross feed. Cooling system and 2-axis digital readout included as standard. Machine is fully compliant with EU directives (CE) as well as Polish and DIN regulations and standards.

Stanje: rabljeno, Leto izdelave: 2002, Turning length: 750 mm Swing diameter: 310 mm Swing diameter over cross slide: 175 mm Spindle bore: 32.0 mm Tailstock quill taper: MK 3 MT Spindle speed: 85 – 2200 rpm Bed width: 200 mm Spindle mount: DIN 55027 size 5 Total power requirement: 2.2 kW Machine weight: approx. 710 kg Dimensions (L x W x H): 1884 x 717 x 1262 mm New price: ~ €20,000 From a technical university (!!) - In tested condition - Machine videos - ?v=iqU7Bkh6INo ?v=aSViqjk51Ik Gedpfx Abexab Tpj Tokf Equipment: - Robust conventional lead- and feed-screw lathe - 3-jaw chuck Ø 160 mm, with spare jaws - "NEWALL" digital readout, front left - MULTIFIX toolpost with 4 holders - Fixed steady rest - Travelling/Follow steady rest - Manually adjustable tailstock - Foot- and spindle brake - Machine vibration-absorbing feet - Operating manual (PDF / NL) * All technical specifications: - Swing diameter over bed: 310 mm - Distance between centers: 750 mm - Swing diameter over cross slide: 175 mm - Spindle bore: 32 mm - Bed width: 200 mm - Spindle mount / DIN 55027 size 5 - Spindle taper: 4.5 M - Spindle speed: 85 – 2000 rpm - Metric thread range: 0.1 – 28 mm - Module thread range: 0.1 – 1.75 - DP thread range: 4 – 70 - Cross slide travel: 150 mm - Top slide travel: 95 mm - Tailstock quill diameter: 40 mm - Tailstock taper: 3 MT - Tailstock quill travel: 100 mm - Motor power: 2.2 kW - Weight: 770 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Višina centra: 160 mm. Gkjdpfx Ajxrbv Ueb Tjf Obračanje nad prečnim vozičkom: 190 mm. Razdalja med konicama: 1000 mm. Premer vretena: 36 mm. Št. obratov: 20-3200. Širina ležišča: 250 mm. Konus zadnjega konika: 4 Motor: 3 kW. Država porekla: Češka republika. Velikost (D x Š x V): 2100 x 950 x 1400 mm. Teža: 1300 kg. Z Berglock hitromenjalnikom orodja. Vsi naši stroji so pred dostavo preizkušeni in servisirani.

Stanje: zelo dobro (rabljeno), Zelo dobro stanje + veliko dodatne opreme Gkedpfow R E Tcsx Ab Tjf

Stanje: dober (rabljeno), Used lead and feed screw lathe COLCHESTER MASTER 3250 Centre height: 170 mm Centre distance: 650 mm Spindle bore: 42 mm Infinitely variable speed: 15–3250 rpm 1 x SCHUNK wedge bar power chuck Ø160mm Gkodpfx Absuqkf No Tjf 1 x MULTIFIX toolholder size B with 4 inserts Machine lamp, chuck guard with electrical interlock Machine mounting feet 1 x live centre 1 x live centre with pressure gauge 1 x drill chuck with morse taper The machine is located with us in 71334 Waiblingen-Beinstein and is immediately available. Inspection of the machine can be arranged by appointment.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 40 mm, višina središča: 160 mm, stružna dolžina: 650 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 20 obr/min, največja hitrost vrtenja: 3.000 obr/min, vrtljajska hitrost (min.): 20 obr/min, skupna masa: 800 kg, nosilec vretena: MK 3, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Availability: on request Gedpfjvnrzqex Ab Tokf Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Spindle speed: 20–3000 rpm, stepless Tailstock taper: MT3 Quill travel: 85 mm Longitudinal feed range: 0.020 – 0.630 mm/rev Cross feed range: 0.006 – 0.200 mm/rev Possible thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and further accessories available on request...

Stanje: novo, Leto izdelave: 2025, izvrtina vretena: 40 mm, premer struženja nad ležiščem sani: 340 mm, stružna dolžina: 760 mm, ERL-V Series Variabele Toerental Draaibank ERL-1330 V Gkjdpfexal Hmsx Ab Tef Ø 340 x 760 mm Spildoorlaat Ø 40 mm Traploos regelbaar toerental Sino digitaal uitleessysteem Vaste bril Meelopende bril Multifix snelwisselbeitelhouder Koelinstallatie LED-verlichting Spindelrem Ø 178 mm klauwplaat Hoogte hart t.o.v. bed: 171 mm Draaidiameter boven bed: Ø 342 mm Draaidiameter in uitsparing: Ø 512 mm Draaidiameter boven dwarsslede: Ø 205 mm Afstand tussen centers: 760 mm Breedte van het bed: 230 mm Uitsparing voor het aanloopplaat: 150 mm Hoofdas en spil: Spilneus, interne conus: D1-4, MK 5 Spilcenterhuls: MK 5 x MK 3 Spilboring: Ø 40 mm Spilsnelheid: L 100~500 tpm, H 500~3000 tpm (traploos regelbaar) Langsgeleiding wagen lengte/breedte: 400 mm / 384 mm Dwarsslede verplaatsing: 180 mm Bovenste slede verplaatsing: 95 mm Schroefdraad en voer: Whitworthdraad: 45 soorten / 2~72 TPI Metrisch draad: 39 soorten / 0,2~14 mm DP draad: 21 soorten / 8~44 DP D.P.M.P. draad: 18 soorten / 0,3~3,5 M.P. Langsvoedingen: 0,05~1,7 mm/omw Dwarsvoedingen: 0,025~0,85 mm/omw Achterbank: Pen diameter: Ø 50 mm Pen verplaatsing: 112 mm Spitsconus: MK 3 Motoren: Hoofdspilmotor: AC 2,2 kW (3 pk) Inverter Koelpomp: 1/8 pk Gewichten (netto/bruto): ca. 850 / 950 kg, 1000 / 1120 kg Verpakkingsmaten: Lengte 2000 mm x 2270 mm, Breedte 965 mm x Hoogte 1900 mm

Stanje: rabljeno, Turning length 600 mm Gkedsxaamuepfx Ab Tjf Swing diameter over bed 360 mm Swing diameter over cross slide 190 mm Bed width 295 mm Spindle speed range 45 - 2240 rpm Spindle bore 33.0 mm Tailstock quill taper MT 3 Longitudinal feed 0.02 - 0.8 mm/rev Cross feed 0.0125 - 0.5 mm/rev Total power requirement 5.5 kW Machine weight approx. 1900 kg Dimensions (LxWxH) 2050 x 950 x 1280 mm Completely overhauled and repainted in 2013 Cost approx. 16,000 Euro Equipment: - WMW NILES 3-jaw chuck Ø 200 mm - Multifix quick-change toolpost size B with inserts - Live center - Chuck key - Movable tailstock - Operating manual

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Schaublin 150 High Precision Lathe with 2-Axis Digital Readout ND780 Technical Specifications: >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Centre distance: 630 mm >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric threads: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable spindle speeds: 55–3,000 rpm >> Rapid traverse motor: 1,500 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1,200 kg Accessories: Godpfx Aowynlusb Tokf >> 160 mm three-jaw chuck, 1 set of jaws >> Multifix B, 3 tool holders >> Collet chuck with collets >> Change gears >> Stops >> Coolant system >> 1 box of reversible jaws >> Centre points >> Operating manual About the Machine: For sale is a Schaublin 150 high-precision lathe. The machine runs, features a rapid traverse, and is in good used condition. Take advantage of the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, - Digital display. - Accessories included. Centers Center height 170 mm Center distance 650 mm Swing over bed 350 mm Swing over cross slide 196 mm Swing in gap 535 mm Width in front of faceplate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Taper in bush No. 3 MT Spindle speeds 3 speed ranges 0 – 3250 rpm Main drive motor 7.5 kW (10 HP) Bed Carriage guideway width 318 mm Guideway type V-guide and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-change toolpost Dickson No. 2 Tailstock Quill diameter (nominal) 63 mm Quill travel 145 mm Morse taper No. 4 MT Offset ±12 mm Leadscrew Diameter 32 mm Pitch 6 mm or 4 TPI Threads Metric pitch 0.2 – 14 mm (51 pitches) Inch thread TPI 2-56 (56 pitches) Module thread pitches 0.2 – 3.5 (20 pitches) Diametral pitch (DP) 8 – 56 (20 pitches) Feeds Metric (R10 series) 0.018 – 1.2 mm/rev Inch (R10 series) 0.0007 – 0.048 in/rev Facing feed = approx. half of longitudinal values Machine height Floor to spindle center 1070 mm Overall length 1250 mm machine 2500 mm Overall width 1100 mm Overall height 1300 mm Coolant pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Gksdpfx Aotr Ud Sjb Tjf Weight 1250 mm between centers approx. 1450 kg

Stanje: novo, Praktikant VC plus The new standard in conventional precision lathes. High-quality, energy-efficient, precise, and universally deployable for production, training, and further education. This machine stands out with: forward-looking technology maximum precision durability operator-friendly ergonomics minimal footprint and a wide range of accessories. The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical Data: WORK AREA Center height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Distance between centers: 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Front bearing diameter: 70 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: stepless FEED RANGE Number: stepless Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill travel: 85 mm Internal taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER display WTS 15 VC plus - Large, clear 15" touchscreen, rotatable and swiveling, 1366 x 768 resolution - Change control screens via swipe gestures - All functions accessible via app manager - Control panels can be configured, placed, and scaled freely - Import drawings / sketches from PDF via USB interface, individually zoomable - Video-assisted machine maintenance - Context help menu (instead of WEILER VC plus display) - Coolant system 18 liters incl. coolant pump Gkedpehw N Ntjfx Ab Tof The machine is available for immediate delivery and can be inspected in our showroom in 71334 Waiblingen-Beinstein. For details on equipment, please contact us.

Stanje: novo, Swing diameter over bed: 400 mm Swing diameter over cross slide: 264 mm Gkodpfxjupxrhj Ab Tjf Turning length: 1000 mm Swing diameter in gap: 550 mm Spindle speed: 44 - 2000 rpm Center height: 200 mm Spindle bore: 52 mm Tailstock quill taper: MT 4 Connection voltage: 400 V Total power requirement: 1.5 / 2.4 kW Machine weight approx.: 0.9 t Space requirement approx.: 1.9 x 0.8 x 1.56 m Equipment / Accessories: - 3-axis digital readout - 3-jaw chuck, 200 mm - 4-jaw chuck, 200 mm - Faceplate, 320 mm - Fixed steady rest - Travelling steady rest - 4-way toolpost - Halogen machine lamp - Machine lamp - Foot brake - Removable chip tray, chip guard - Hardened and ground bedways - Complete coolant system - Chuck guard - Machine tools

Stanje: potreben popravila (rabljeno), Turning length 1000 mm Swing diameter over bed 380 mm Swing diameter over cross slide 190 mm Spindle speed range 25 - 2000 rpm Gkjdjw U U Uqspfx Ab Tef Number of spindle speeds 18 Spindle bore Ø 56.0 mm Tailstock quill taper MK DIN 228 / MK 4 Quill stroke 150 mm Bed width 310 mm Spindle mount DIN 55027 / 6 Longitudinal feeds 0.022 - 0.8 mm/rev Cross feeds 0.011 - 0.4 mm/rev Thread cutting metric 0.3 - 10.0 mm Operating voltage 380 V Total power requirement 7.5 kW Machine weight approx. 1600 kg Basic functions available Machine has various leaks Sold as is at a special price! Lathe with precision-ground and induction-hardened bed. Very well suited, e.g., for use in workshops and training centers. - Machine video - ?v=zCGu4i6V5dM Equipment: - robust lead-screw and feed-screw lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX tool post - size B - with 3 inserts - movable tailstock, including quick-action drill chuck - swarf guard rear panel - front emergency stop button - adjustable bed stop - coolant device including coolant tray - operating manual (PDF)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm Gkjdpfx Aovrckqeb Tsf >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: zelo dobro (rabljeno), - Multifix quick-change toolpost “B” - Quick-action collet chuck device Centre height: 150 mm Centre distance: 630 mm Spindle bore: 40 mm Gsdpfohmkh Tex Ab Tokf Spindle speed (stepless): 55 – 3000 rpm Feed rate: 0.05 – 0.35 mm/rev Spindle / tailstock taper: MT 5 / MT 3 Swing over cross slide: 177 mm Swing over bed: 340 mm Power: 4.45 kW Dimensions: 1730 x 970 x 1300 mm Weight: 1250 kg

Stanje: novo, Swing diameter over bed: 320 mm Swing diameter over cross slide: 200 mm Turning length: 900 mm Swing diameter in gap: 320 mm Spindle speed: 75 - 2000 rpm Centre height: 160 mm Spindle bore: 38 mm Tailstock quill taper: MT 3 Connection voltage: 400 V Total power requirement: 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.6 x 0.75 x 1.7 m SINO digital readout 3-jaw chuck 160 mm 4-jaw chuck 160 mm Faceplate 250 mm Fixed steady rest Quick-change tool post with 4 tool holders Machine lamp Chip tray, chip guard Gkjdpohwavrofx Ab Tsf Hardened and ground bed ways Chuck guard Machine tools

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Gsdpfevrcqdox Ab Tokf Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: novo, Swing diameter over bed: 320 mm Gjdsupxlnopfx Ab Tskf Swing diameter over cross slide: 220 mm Turning length: 600 mm Swing diameter in gap: 320 mm Spindle speed: 60 - 1650 rpm Centre height: 160 mm Spindle bore: 38 mm Tailstock quill taper: MT 3 Electrical connection: 400 V Total power requirement: 1.1 kW Machine weight approx.: 340 kg Space requirement approx.: 1.4 x 0.75 x 0.7 m 3-jaw chuck: 160 mm 4-jaw chuck: 200 mm Faceplate: 200 mm Fixed steady rest Travelling steady rest 4-way tool post Halogen machine lamp Chip tray, chip protection wall Hardened and ground bed ways Longitudinal and cross feed Complete coolant system Chuck guard Change gear set Machine tools

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160B Precision Centre Lathe – 3-Axis K&C Digital Readout System (NEW) Refurbished with acceptance protocol confirming new machine tolerance levels. Technical Data: >> Machine Number: 87 160 760 >> Centre Height: 160 mm >> Distance Between Centres: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feed Rates: 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake, switchable >> Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m Accessories & Equipment: >> 3-axis K&C digital readout system (new), including 12-month manufacturer's warranty and operating manual Gjdpfx Abjvrdlce Tokf Functions: mm/inch switching, coordinate mode ABS/INC, value halving, reference mark, tool memory for up to 200 tools, taper calculation, radius/diameter display, instant zero reset, and count direction switching >> New collet system, collets NEW from 3 to 25 mm in 1 mm increments >> Three-jaw chuck 160 mm, new, with 2 sets of jaws >> Multifix size A toolpost system with 3 tool holders >> Electronic spindle protection >> New LED machine lamp >> New machine mounts >> Splash guard >> Operating manual, spare parts list (PDF) About the Machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe meeting toolroom precision, in fully overhauled geometric condition. Refurbished, with acceptance protocol confirming new machine tolerance specification. For operator safety: electronic spindle protection, covered lead and feed screws, 2 emergency stops, and a braking motor. This newer generation of Weiler lathes is highly operator-friendly and can produce ground-quality surface finishes. You are welcome to inspect the machine under power onsite and verify its condition firsthand.

Stanje: novo, Swing diameter over bed: 400 mm Swing diameter over cross slide: 264 mm Turning length: 1000 mm Swing diameter in gap: 550 mm Spindle speed: 44 - 2000 rpm Center height: 200 mm Spindle bore: 52 mm Godpskxhqvjfx Ab Tskf Tailstock quill taper: MT 4 Connection voltage: 400 V Total power requirement: 1.5 / 2.4 kW Machine weight approx.: 0.9 t Space requirement approx.: 1.9 x 0.8 x 1.56 m Equipment / Accessories: - 3-axis digital readout - 3-jaw chuck, 200 mm - 4-jaw chuck, 200 mm - Faceplate, 320 mm - Fixed steady rest - Travelling steady rest - 4-way toolpost - Halogen machine lamp - Machine lamp - Foot brake - Removable chip tray, chip guard - Hardened and ground bedways - Complete coolant system - Chuck guard - Machine tools

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm Gkedswrm Dtepfx Ab Tof >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of Manufacture: 1986 >> Machine No.: 86-160-348 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 8 steps, from 96 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027, Size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric Thread Pitches: from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be engaged >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Accessories and Equipment: >> 3-axis Digital Readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> Collet chuck system, collets as new, range 1–29 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix toolpost size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard Gkjdpfewthbiex Ab Tof >> Machine feet >> Coolant system About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled, refurbished, and repainted in light grey. All carriages move very smoothly and evenly. The machine runs quiet even at high speeds. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Center height: 200 mm >> Swing diameter over bed: 400 mm >> Swing diameter over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, infinitely variable from 35–3000 rpm >> Tailstock quill travel: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint/installation dimensions approx.: length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and Equipment: >> 3-axis position display >> 1 piece 3-jaw chuck with 1 set of jaws >> Toolholder with 3 pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: Gksdowag Stjpfx Ab Tjf For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, used very little. The machine is, of course, fully functional. All slides move very smoothly and evenly. The bedways are in excellent condition. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: >> Machine No. 90-1495 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Godovambcopfx Ab Tskf Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW >> Rear safety cover >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Technical Specifications: >> Year of manufacture: approx. 2000, Machine no. D3F H1 010 Gjdpfx Aowvuf Tob Tskf >> Centre height: 170 mm >> Swing diameter over bed: 340 mm >> Swing diameter over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35–3000 rpm >> Quill stroke: 120 mm >> Tailstock: Morse taper 3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Space requirements: approx. length 1.600 x depth 0.9 x height 1.3 meters >> Weight: approx. 730 kg Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Functions: Metric/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming (200 positions), taper calculation, radius/diameter, rapid zeroing, count direction switching >> 1 piece 3-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B tool post with 2 holders >> Chip guard >> Coolant system About the Machine: Offered is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in excellent condition. The machine is naturally fully functional. The bedways are in very good condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new 3-jaw chuck. Take the opportunity to inspect this machine under power on site and see the condition for yourself.