CNC stružno-rezalni centri nakup rabljenega (644)

Stanje: rabljeno, Leto izdelave: 2016, INDEX C200-sl control Spindle bore: 102 mm Spindle diameter at front bearing: 140 mm Speed: 3,500 rpm Spindle nose: ISO 702/1 8 Chuck diameter: 315 mm Torque: 450 Nm Power: 47 kW Z-axis: 610 mm Feed force in Z: 7,000 N Rapid traverse in Z: 40 m/min Z-axis: 610 mm X-axis: 780 mm Feed force in Z and X axes: 7,000 N Rapid traverse in Z and X: 40 m/min Number of tools: 2x3 pcs. Tool system: VDI 30 Tool turret: Upper X-axis: 580 mm Y-axis: ±140 mm B-axis: 270° Feed force in X/Y/B: 7,000/10,000/614 Nm Rapid traverse X/Y: 40/30 m/min Tool turret 2: Lower Pgjdpoywzxvsfx Ah Isi Y-axis: ±140 mm B-axis: 270° Feed force in Y/B: 10,000/614 Nm Rapid traverse in Y: 30 m/min Speed: 9,000 rpm Spindle nose: HSK-T 63 Torque: 66 Nm Power: 24.5 kW Max. tool length: 300 mm Max. tool diameter: 70 (160) mm Max. tool weight: 5 kg Number of tool stations: 140 positions According to our assessment, the machine is in good used condition and can be demonstrated under power by appointment. The Y-columns have scoring marks, see photo. The accuracy of the machine is not affected as a result. Technical features: - 5-axis machine configuration for simultaneous 5-axis machining with both motor-driven milling spindles - "Smartlight" signal light with LED - Power chuck, Röhm DURO-NC - Foot switch for power clamping on main and counter spindle - Stop device including coolant supply through main spindle - Stop device including coolant supply through counter spindle - Cooling unit for spindle and electrical cabinet cooling, 26 kW / 70 l/min - Extraction system with electrostatic separator, Büchel SH2000 PEV/T - Chip conveyor - Drill breakage detection for tool turrets 1 and 2 using Renishaw laser - Coolant spray gun - Air curtain on the work area window - "Create Myinterface" software package - Brankamp CMS 100 Accessories, depicted tools and clamping devices are included in the scope of delivery only if specified in the additional information. Modifications and errors in the technical data and specifications as well as prior sale reserved!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 725 mm, premer struženja nad prečnim suportom: 590 mm, premer struženja: 376 mm, moč vretenovega motorja: 30 W, največja hitrost vretena: 2.800 obr/min, izvrtina vretena: 115 mm, potovalna razdalja osi X: 280 mm, pomik po osi Z: 830 mm, hitro pomikanje X-os: 24 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 1.112 Nm, prehod palice: 103 mm, Premer palice (maks.): 103 mm, poteza s peresom: 100 mm, premer tulec: 100 mm, hod vretena: 100 mm, premer nihanja nad prečnim premičnikom: 590 mm, nos vretena: A 2-11, premer nihanja nad prečno desko: 720 mm, sila podajanja os X: 9.465 N, podajalna sila osi Z: 17.379 N, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Stroj je kot nov, uporabljen je bil samo za zagon in je kombiniran s Halter Universal BIG 70 LoadAssistant. Možna je tudi ločena kupnja. Pgodpfxeyud Uao Ah Isi

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 64.297 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2SAY0351, stružna dolžina: 350 mm, premer struženja: 114 mm, potovalna razdalja osi X: 100 mm, pomik po osi Z: 320 mm, model krmilnika: FANUC SERIES 18i-TB, Bez minimalnej ceny – sprzedaż gwarantowana dla najwyższej oferty! Złożenie oferty zobowiązuje do terminowego odbioru w jednym z terminów: między 11.05.2026 a 13.05.2026 lub między 18.05.2026 a 21.05.2026! DANE TECHNICZNE Długość toczenia: 350 mm Średnica toczenia: 114 mm Pgsdeyn Nuxspfx Ah Ioi Prędkość obrotowa wrzeciona (max.): 8 000 obr./min Przelot przez wrzeciono: 25,4 mm Odległość między kłami: 445 mm Odległość między osiami wrzeciona: 485 mm Przesuw osi X: 100 mm Przesuw osi Z: 320 mm Prędkość szybkiego przesuwu osi X: 20 m/min Prędkość szybkiego przesuwu osi Y: 10 m/min Prędkość szybkiego przesuwu osi Z: 30 m/min Moment obrotowy: 30 Nm Średnica obrotu nad prowadnicami: 325 mm DANE MASZYNY Sterowanie: FANUC SERIES 18i-TB Wymiary i ciężar Wymiary (dł. x szer. x wys.): 2 500 x 2 000 x 2 100 mm Waga całkowita: 2 500 kg Producent sterowania: FANUC Napięcie zasilania: 3 x 400 V Częstotliwość: 50/60 Hz Prąd znamionowy: 26 A Przebieg (wg wyświetlacza): 64 297 h WYPOSAŻENIE Konik Wrzeciono główne Rewolwer narzędziowy (12 pozycji) Narzędzia napędzane (6 szt.) Oś Y

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2016, CNC stružnica DMG MORI ecoTurn 450 Z upravljanjem Siemens 840 D SLIMline Letnik izdelave: 2016 Maks. struženi premer: 315 mm Medosna razdalja: 685 mm Pomik X: 224 mm Pomik Z: 600 mm Vretenova odprtina: 91 mm Maks. hitrost vretena: 4000 vrt/min Z naslednjo opremo: Pjdpfx Aheyn Np No Ijgi Drsna zaščita z notranjo osvetlitvijo 12-pozicijski revolver z 12 pogonskimi postajami C-os, Y-os +/- 50 mm 5 kosov pogonjenih orodij VDI 40 60 kosov držal orodij VDI 40 Hidravlična vpenjalna glava HAINBUCH s stopalko Merilna naprava za orodja v delovnem prostoru Prevzemna naprava za obdelovance Konjiček s pinolo 4-barvna signalna luč Transporter za ostružke Izpiralna pištola Sistem za hlajenje z ojačano črpalko 20 bar Navodila za uporabo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 61.440 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 06800003891, Oprema: dokumentacija / priročnik, Ponujamo to pripravljeno DMG GILDEMEISTER CTV 250 CNC stružno-rezkalno središče, letnik 2008. Proizvajalec: DMG GILDEMEISTER Model: CTV 250 Letnik: 2008 Stanje: pripravljeno za uporabo Tip stroja: CNC stružno-rezkalno središče Delovne ure: Vklop: pribl. 76.300h / Delovanje vretena: pribl. 61.440h V prodaji so vključene naslednje komponente: - vključno s paletnim obtok sistemom - vključno s transportnimi trakovi za obdelane dele - transportni trak za ostružke Redno vzdrževanje je bilo opravljeno, dokumentacija je na voljo. Za dodatne informacije ali vprašanja nam pišite ali nas pokličite. Pjdoyt Dudopfx Ah Isgi

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, CNC obdelovalni center DMG DECKEL MAHO DMF 260-11 s pomičnim stebrom (travelling column), primeren za obdelavo velikih in težkih kosov v energetiki, strojništvu ali avtomobilski industriji. Stroj je opremljen z modernim upravljalnim panelom DMG ERGOline in robustno konstrukcijo za visoko natančnost in stabilnost pri obdelavi. Tehnične specifikacije Pomiki osi X: 2600 mm Y: 1100 mm Z: 900 mm Miza velikost mize: 3200 × 1100 mm maks. obremenitev mize: cca 4000 kg Vreteno maks. obrati: 10.000 vrt/min konus: SK40 / SK50 (odvisno od konfiguracije) Krmilni sistem Siemens / Heidenhain (ERGOLINE panel) Magazin za orodja do 60 pozicij Teža stroja cca 25.800 kg Napajanje 400 V / 50 Hz priključna moč cca 77 kVA (po tablici) Oprema Pedeyrrcyopfx Ah Iegi popolnoma zaprta delovna kabina avtomatski zalogovnik orodij hladilni sistem otopni transporter upravljaški panel DMG ERGOline papirna filtracija hladilne tekočine

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, CNC stružnica s protivretencem, 2 revolverji s pogonskimi orodji, zgornji revolver Y-osni pomik 50 mm – leto izdelave (možna popravila, generalka): 2005, zamenjava krogličnega navojnega vretena osi X na zgornjem revolverju leta 2011, menjava vpenjalnega valja – vreteno št. 1 – približno 2018, menjava ležajev na obeh vretencih – 2011, sprotna obnova obeh revolverjev. Tehnični podatki: Obodni premer nad posteljo: 700 mm Največji stružni premer: 520 mm Razdalja med čeli obeh vretenc: 1500 mm Pomik protivretenca: 1100 mm CNC stružnica Emco Hyperturn_690MC TCMY plus s protivretencem, 2 revolverja s pogonskimi orodji, zgornji revolver začetek Y-osi 50 mm. Krmilni sistem: Siemens Sinumerik 840D. Oprema: Pogonska orodja – 2 ravni + 2 kotna Nosilci: 2 v izvrtini + 2 na površini Čeljusti: 2x trde osnovne čeljusti. Popolna dokumentacija za stroj Rezervni revolver – po popolni obnovi. Podpfx Ahoyrqnue Isgi

Stanje: rabljeno, Leto izdelave: 1998, • CNC obdelovalni center Emco, tip VMC 600, letnik 1998 Podpfeyucbfsx Ah Ijgi • Vključuje ročni kolesnik in 3 primeže z vpenjalnimi pripomočki

Stanje: rabljeno, Leto izdelave: 2016, Okuma MULTUS B300II Drehmaschine mit Okuma OSP-P300S-H Steuerung, Y-Achsen-Verfahrweg 160 mm, 60-fach Werkzeugmagazin / Vorbereitung für Hochdruckkühlung: 70 bar / externe Kühlmittelpumpe: 0,8 kW, 6 bar, 20 l/min / Elektrische Spindelorientierung / Luftdüse zur Spannfutter-Reinigung, Kollisionsvermeidungssystem (CAS) / Vorbereitung Späneförderer / Großbohrungsspindel ASA 6": 22/15 kW, 3.800 U/min / Hochpräzise C-Achsen-Positionierung / Durchgehende B-Achse / Werkzeugmagazin mit 60 Plätzen / 0,1 Mikron Auflösung Software / API Library 2 für OSP-P300S / Standard Späneförderer rechts / 15-bar Kühlmittelpumpe, 20 l/min / Filtereinheit mit 4 Gewebefilterbeuteln (25 Mikron), Pumpe 15 bar, 20 l/min, SCHUNK ROTA THW+260-81R A8 Spannfutter mit KITAGAWA SS1770 Zylinder für Großbohrung Hauptspindel, SCHUNK ROTA THW+215-66 A6 Spannfutter mit KITAGAWA SS1452 Zylinder für Gegenspindel, Y-Achsen-Bearbeitungspaket: Helikalinterpolation / Y-Achsen-Drehen mit abgesetztem Werkzeughalter / Koordinatenumrechnung / Doppel-Druckspannsystem für Hauptspindelfutter über M-Codes (irreversibel) / Doppel-Druckspannsystem für Gegenspindel über M-Codes (irreversibel), 5-Achsen-Bearbeitungspaket: Super NURBS auf 5 Achsen / Vektorregelung / DNC-DT-Schnittstelle / Werkzeugpositionskontrolle / 3D-Koordinatentransformation / Helikalinterpolation (inkl. Schrägbahnenprofil-Software), Haupt- und Gegenspindel: ASA 8, 15 kW, 5.000 U/min, 651 mm Stangendurchlass / max. Drehdurchmesser: ⌀630 mm / Umlauf und Abstand zwischen Spindelnasen: 1.290 mm / B-Achse: kontinuierlich, Indexierung 0,001°, HSK63, 11 kW, 6.000 U/min / Frässpindel HSK A63: 10.000 U/min, 16/11 kW. Ursprungsland: Japan Verladung auf ein geeignetes Fahrzeug ist kostenlos. Psdpfx Ahoyrdvle Isgi Maschine steht aus verkaufsbedingten Gründen demontiert in Brescia, Italien.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Machine package from Emco for sale! For sale is a package of two lathes including ALL tool holders and clamping equipment! 1 x Emco 665 MC Plus with subspindle and 2 turrets, year 2006, including 4 meter FMB Turbo 8-80 bar feeder, year 2006. Runs without any issues. 1 x Emco 332 Big Bore with subspindle and 2 turrets, year 2001, including 3 meter FMB 5-55 Turbo bar feeder, year 2016. The 332 currently has a fault with the upper turret engaging the driven tools (most likely the coupling cup is defective). Estimated repair costs approx. €5,000. For this reason, we have further significantly reduced the price. Otherwise, this machine also runs without any issues! Both machines are in daily operation and can be inspected under power. The machines have been operated in single-shift mode. Pgjdeyifnhopfx Ah Isi Since we are selling both lathes as a package (due to a system changeover), this package also includes an extensive range of tool holders, clamping equipment (for all machines), and feed equipment for all bar feeders, which are not individually listed here due to sheer volume! Dismantling and loading of the machines onto customer-supplied trucks can be organized for a small additional fee. As we have now significantly reduced the price once again, we will sell both machines for the fixed price listed here. This offer is valid for 10 more days; after that, the machines will no longer be for sale and will remain in our production.

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Parametri stroja: Dimenzije stroja d x š x v: Psdpfx Ahjyq Iaxj Isgi D maks. 51 mm, L-maks. 120 mm Opis: Stroj je v dobrem tehničnem stanju, po predhodnem dogovoru možnost preizkusa. 54,7 kVA Število orodij 12

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, MAZAK QUICK TURN 250MSY x 1000U Maks. premer obdelave: 380 mm Maks. dolžina obdelave: 1.005 mm Maks. vrtljaji glavnega vretena: 4.000 min⁻¹ Maks. vrtljaji nasprotnega vretena: 6.000 min⁻¹ Maks. premer palice: 80 mm Stroj je opremljen z: - CNC krmilje Mazatrol SmoothG - KITAGAWA trikrako vpenjalno glavo BB-210 za glavno vreteno, premer 254 mm - KITAGAWA trikrako vpenjalno glavo B-206 za drugo vreteno, premer 169 mm - Tool Eye - C-os - C-os nasprotnega vretena, natančnost vnosa 0,0001° - Y-os - avtomatski izmetalec kosov Pgedpfjypa Tbjx Ah Ioi - Ojačana črpalka za hladilno tekočino - Transporter za odrezke - Standardni paket orodja MAZAK

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 43.558 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 07400003691, premer struženja: 120 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 118 mm, model krmilnika: SIEMENS SINUMERIK 840 D POWERLINE, razdalja med vreteni: 900 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within one of the following timeframes: between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Pgjdpfx Ahoym A S Ij Iei Spindle bore diameter: 118 mm Spindle distance: 900 mm X1-axis travel: 290 mm Z1-axis travel: 650 mm X2-axis travel: 180 mm Z2-axis travel: 650 mm Y1-axis travel: ±40 mm Z3-axis travel: 670 mm X3-axis travel: 175 mm Rapid traverse speed X/Z-axis: 30 m/min Rapid traverse speed Y-axis: 15 m/min Number of tool turrets: 2 Number of tools per turret: 12 All turret positions are powered MACHINE DETAILS CNC control: SIEMENS SINUMERIK 840 D POWERLINE Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Operating hours: 88,040 h Spindle hours: 43,558 h EQUIPMENT Chip conveyor Foot switch Note: The machine has the following defects: - The B-axis is defective (located on turret 1) - Guideways and drives show age-related wear - The X2-axis (guide rails) runs slightly misaligned by approx. 0.03 mm (re-measurement required) - Setting axis reference values in the controller does not work - After hydraulic pump failure, a replacement pump was installed and is now operating as a separate unit outside the machine External reference: Bilstein – Lot 2

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, obratovalne ure: 39.361 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 07510001241, stružna dolžina: 1.185 mm, premer struženja: 640 mm, največja hitrost vretena: 12.000 obr/min, teža obdelovanca (maks.): 150 kg, model krmilnika: SIEMENS SINUMERIK 840 D, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter: 640 mm Maximum turning diameter: 640 mm Maximum turning diameter (sub spindle): 400 mm Spindle distance: 1,500 mm Turning length: 1,185 mm Pjdpfx Ahjym A D Ro Isgi Max. workpiece weight: 150 kg Slide travel X1: 550 mm Slide travel Y1: 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm Max. milling spindle speed: 12,000 rpm Max. main spindle speed: 4,000 rpm Max. sub spindle speed: 3,200 rpm Rapid traverse speed, Slide 1 (X/Y/Z): 40 / 24 / 70 m/min Rapid traverse speed, Slide 2 (X/Z): 24 / 36 m/min Rapid traverse speed, Slide 3 (Z): 36 m/min Tool interface: HSK 63 Number of tool positions in chain magazine: 40 MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 7,800 x 4,100 x 3,040 mm Machine weight: 16,500 kg Operating hours: 72,899 h Spindle hours: 39,361 h Bar feeder Model: COCCHE GIOVANNI CNC-DB 110 Year of manufacture: 2008 Serial number: CNCDB-08.306 Weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty and needs to be repaired - The Q2 axis (milling spindle tool changer) malfunctions frequently - The X2 axis (guide rails) is slightly misaligned - Guides and drives are worn consistent with age External Reference: Bilstein- Lot 1

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 346 h, število osi: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and a rapid traverse rate of 24 m/min on the X-axis. If you are looking for high-quality turning and milling capabilities, the Hurco CNC TMX 8 MYSi turning-milling center should be considered. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm Pgodeym T Itepfx Ah Isi • Repeatability: 0.005 mm • Max. turning diameter: 508 mm • Max. turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Max. main spindle speed: 4,500 rpm • Max. sub-spindle speed: 6,000 rpm • Synchronizing spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar pass-through: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Maximum motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interruption capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included; swiveling holders are not included.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 92.000 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D, število osi: 5, This 5-axis Index G 200 RATIO LINE was manufactured in 2003. It features a Y-axis travel of 120 mm, a main spindle diameter of D65, and a sub-spindle diameter of D60. The machine is equipped with a turret with 12 stations and live tooling on both turret 1 and 2. If you are looking for high-quality turning and milling capabilities, you should consider the Index G 200 RATIO LINE turn-mill center we are offering for sale. Please contact us for further details. • C-axis on main and sub-spindle • Thread cutting without compensating chuck • Electronic shaft • Additional V24 RS232 interface in the control cabinet • Send/Trace function • MDE interface (machine on, machine running, part counter) • Marposs (Brankamp) collision monitoring CMS100 • 3D machine model for kinematic simulation in CAM programming • Control cabinet cooling unit • Main spindle D65 • Sub-spindle D60 • Coolant flushing of the sub-spindle (electrically actuated shut-off valve) • Foot switch • Turret (12 stations), top and bottom • Live tooling on turret 1 and 2 • "Synchronous tailstock" control function for turret 2 • Y-axis 120 mm • Automatic sliding door (hydraulic) • Coolant pump 80 l / 8 bar • High-pressure coolant connection for slides 1 and 2 with solenoid valve • Coolant spray gun • Preparation for extraction and filter system connection • Operating hours approx. 92,000 h Pgjdpfx Ahoylw Dcj Iji Additional Equipment • Gantry unloading device with actuated gripper, NC controlled • Gripper fingers D4-45 mm and D40-65 mm • Indexed conveyor belt • UNIMAG interface • Chip conveyor (hinged belt), discharge height 1250 mm • KNOLL vacuum rotary filter (emulsion version) • High-pressure pump 80 bar • Workpiece holding: • Collet chuck for draw tube, HAINBUCH (main and sub-spindle) • Power chuck D210 with quick jaw change, Schunk (main and sub-spindle) • Stop device • Optional: large assortment of driven tool holders and spare parts inventory

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, moč vretenovega motorja: 3.700 W, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 142 mm, pomik po osi Z: 250 mm, skupna višina: 1.720 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 18iT, This 4-axis lathe MIYANO BNJ 42S was manufactured in 2004 and is equipped with two turrets and a Fanuc 18iT control for precision turning operations. It features a bar capacity of 42 mm and spindle speeds up to 5,000 rpm. Fitted with an LNS Hydrobar MiniSprint bar feeder and standard fixed as well as powered tool holders, this machine optimizes productivity. Consider the MIYANO BNJ 42S machine we are offering for sale. For further information about this lathe, please contact us. Additional equipment - Bar feeder: LNS Hydrobar MiniSprint - Tool holders: Standard fixed and 2 powered tool holders Machine benefits Qualitative machine advantages - High spindle speed range, reliable Fanuc control Technical machine advantages - Fixed headstock lathe with 2 turrets, powered tool turret Additional information Pgjdpfox D Eh Sjx Ah Ioi Machine still under power Dimensions Machine depth: 1,450 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, moč vretenovega motorja: 26.000 W, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 630 mm, pomik po osi Z: 1.585 mm, skupna višina: 3.025 mm, skupna širina: 2.360 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-F with 15" display, največja dolžina izdelka: 5.125 mm, število osi: 7, This 7-axis DN SOLUTIONS PUMA MX2600ST was manufactured in 2023. As-new, showroom model. It features a maximum spindle speed of 4,000 rpm and a bar capacity of 76 mm. The machine is equipped with a multi-tasking configuration including 3 spindles and a lower turret with 12 stations. If you are looking for a high-quality turning and milling center, consider the DN SOLUTIONS PUMA MX2600ST turning-milling center for sale. Contact us for further details. • As-new, showroom model • Configuration: Multi-tasking with 3 spindles and lower turret • Chuck size: 10" (255 mm) • Bar capacity: 76 mm • Travels: • X1 / X2: 630 / 230 mm • Z: 1,585 mm • Number of axes: 7 (fully controlled) • X1 / Z1 / Y1: Milling spindle axes • B axis: Milling spindle swivel/tilt (approx. 240° range) • X2 / Z2: Lower turret axes • C axis: Spindle indexing/rotation Pgsdpfeyrtc Uex Ah Iji • Spindle motor power: 26 / 22 kW • Spindle architecture: 3 spindles, including top-mounted milling spindle • Lower turret: 12 stations, BMT 65 interface • Tool interface: CAPTO C6 (milling head) • Guideway type: Linear guideway • Precision: 0.001° indexing accuracy on B and C axes • Thermal control: Intelligent thermal compensation and optimized cooling to minimize thermal displacement • Cooling system: Coolant flushing for right/left spindle; high-pressure coolant through lower turret and milling spindle • Filtration/Monitoring: Level monitoring; flow sensor • Data/Software: AICC machining; data server 1 GB Additional equipment • Renishaw RMP60 measuring probe • Tool setter • Automatic door (automation) • Oil skimmer • Optional: Chip conveyor (hinged belt conveyor). Price on request • The machine is delivered with a standard basic package: fully equipped turret head, including base holders.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, moč vretenovega motorja: 15.000 W, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 135 mm, pomik osi Y: 30 mm, pomik po osi Z: 230 mm, skupna višina: 2.070 mm, skupna širina: 2.300 mm, proizvajalec krmilnikov: FANUC, največja dolžina izdelka: 3.510 mm, število osi: 8, This 8-axis DN SOLUTIONS PUMA TT1300SYYB turning-milling center was manufactured in 2019. It is a mint condition showroom model. The machine features a dual-spindle and dual-turret configuration, allowing for independent operation. With a maximum spindle speed of 6,000 rpm and integrated high-speed C-axis and Y-axis, it offers advanced capabilities for complex machining tasks. If you are looking for high-quality turning solutions, consider the DN SOLUTIONS PUMA TT1300SYYB machine we are offering for sale. Contact us for further details. • Configuration: twin-spindle / twin-turret (independent operation) • Chuck size: 6" (170) • Bar capacity: 51 mm • Travel paths: X1/X2 135/80 mm; Z1/Z2 530/530 mm; Y-axis 30/40 mm • Spindle motor power: 15 / 11 / 7.5 kW • Turret stations: 12 / 12 (BMT 45) • Guideways: roller guideways • Features: Integrated high-speed C-axis and Y-axis for complex machining Additional Equipment • High-pressure coolant through turret • Oil skimmer • Coolant supply through right/sub-spindle • Parts ejector (sub-spindle) • Part catcher on main spindle with collection bin • Parts removal conveyor for sub-spindle • Tool presetting device (automatic, electric) • Automatic shutoff • Interface for bar feeder (bar feeder not included) • 3-color status indicator light • Optional: chip conveyor (hinged belt conveyor). Price on request • Machine is supplied with a standard base package: fully equipped turret including base holders. • Optional accessories: • 5 pcs. external turning toolholders BMT45 20x20 single (500-0665) • 2 pcs. facing toolholders BMT45 20x20 left/right (500-0668) • 1 pc. external turning toolholder BMT45 20x20 double single (500-0669) • 2 pcs. double external turning holders HS (500-0686) • 1 pc. parting blade holder (500-6317) • 7 pcs. drill holders ID 25mm BMT 45 (500-5898) • 2 pcs. double internal turning toolholders GS • 2 pcs. coolant-through cover drill holders (500-5687) • 2 pcs. reduction sleeve sets (drilling) Pedpfxjyrr Suo Ah Ijgi • 2 pcs. reduction sleeve sets (drilling) • 1 pc. PRECI-FLEX ER20 adapter set (BMT 45P) (500-0524) • 2 angled externally cooled Eppinger AGWs • 2 straight externally cooled Eppinger AGWs Additional Information Like new, showroom model Technical Specification Counter Spindle: No Driven Tools: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, potovalna razdalja osi X: 800 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: 640M Nexus, število osi: 4, Ta 4-osni Mazak NEXUS HCN 6000 je bila izdelana leta 2006. Opremljena je z Mazatrol 640M Nexus krmiljem, 800 mm pomika v oseh X, Y in Z ter rotacijo B-osi za 360°. Hitrost vretena dosega do 10.000 vrt/min, orodjarna pa ima 120 mest. Miza prenese obremenitev do 1.000 kg. Preverite možnost nakupa tega Mazak NEXUS HCN 6000 stružno-rezkalnega centra. Za več informacij nas kontaktirajte. • Rotacija B-osi: 360° • Velikost mize: 500 x 500 mm • Dovoljena obremenitev: 1.000 kg • Orodjarnik: 120 pozicij Pgjdpoygl Ncsfx Ah Ioi • Visokotlačno hlajenje: 70 barov Dodatna oprema • Odsesavanje ostružkov (transportni trak za ostružke) Tehnične specifikacije Konus ISO 50

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 48.973 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840 D, število osi: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It is equipped with a Siemens 840 D control system, a sub-spindle, and a bar feeder package for enhanced versatility. The machine features a 980-liter coolant system and a hinged belt conveyor for efficient operation. If you are seeking high-quality turning and milling machines, you should consider the DMG MORI CTX Beta 800 4a that we are offering for sale. Please contact us for additional details regarding this machine. • 2 x 16-position Sauter star VID 30 turrets • Siemens 840 D • Eccentric turning and milling operations • TC variable spindle speed • Sub-spindle • Glass scales for Y1, Z1, Z2, Z3, X1, X2, X3 axes Additional Equipment: • 980-liter coolant tank with 8 bar/20 L and 20 bar/40 L, programmed via M-function • Paper band filter • Chuck flushing system for main spindle external • Chuck flushing system for sub-spindle external • Coolant spray gun • Hinged belt conveyor • Bar feeder package • Window cleaning with compressed air Pgodpfxjx D Nd Ds Ah Isi • SK package for aluminum machining • Artis CTM tool breakage monitoring

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 12.125 h, moč vretenovega motorja: 29.000 W, največja hitrost vretena: 5.000 obr/min, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 840D, število osi: 6, This 6-axis EMCO Hyperturn 665MC Plus turning-milling center was manufactured in 2008. It features a multi-axis CNC system with a Y-axis and B-axis, enabling complete machining of turning and milling components. Equipped with integrated spindle motors on both the main and counter spindles, it offers a spindle speed of up to 5,000 rpm for the main spindle and 7,000 rpm for the counter spindle. The machine includes a 24-position tool magazine and is controlled via a SINUMERIK 840D system. If you are looking for high-quality turning and milling capabilities, consider the EMCO Hyperturn 665MC Plus, which we offer for sale. Please contact us for further information about this machine. Additional Equipment • Tool turret: 12-position radial VDI 30 tool turret with directional logic for up to 12 driven tool stations • B-PowerMill: Motorized milling spindle with a 24-pocket tool magazine, 210° swivel range • Optional tool package: Includes static and driven tool holders, collet holders, reduction sleeves, and actuating clamps • Hollow clamping cylinder with draw tube / part ejector and coolant flushing through the counter spindle / finished part catcher • Finished part collection device / coolant system integrated in the chip conveyor / high-pressure pump (14 bar) and fine filter • Flush pumps (3.7 bar) / electrical cabinet air conditioning / electrostatic oil mist separator • Hydraulic unit / machine lamp / foot switch interface / signal lamp • Documentation with electronic handwheel, PC keyboard, network readiness, tool monitoring, process window, cleaning pistol Pgodpex D Hwnjfx Ah Ioi • Main spindle clamping system: Hainbuch BZI 80 pull-to-center Machine Advantages Technical Machine Benefits • Counter spindle: 22 kW / Counter spindle: 0–7,000 rpm • Main spindle: kk 6 (bar capacity 65 mm) / Counter spindle: kk 6 • Y-axis travel: +/- 50 mm • C-axis for main and counter spindle • Counter spindle: 3-jaw chuck, 210 mm • Approx. 40 Capto C4 tool holders for milling spindle • Loader lm 1200 • The machine does not have ShopTurn programming. It must be programmed with ISO code, with simple cycles available for drilling, milling, swiveling, etc. • 12-station turret and a milling spindle

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 24.140 h, skupna masa: 10.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: 31i-NT-SmartX, število osi: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017. It features a bar capacity of up to 65 mm and two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. The machine is equipped with a Samsys bar feeder, an Absolent extraction system, and numerous automated features such as through-spindle coolant supply, parts catcher, and automatic tool setting devices. Take advantage of this opportunity to purchase the Nakamura NTJ100 turning-milling center. Contact us for further information about this machine. Pgedpfx Asx D Iuzsh Iei • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei probe for automatic workpiece measurement (infrared or radio) for left and right spindle • Left and right with automatic swing-out function and 2x 4 measuring directions for rapid and precise tool setting via NC function • Operating hours: 43,399h • Coolant system: through-spindle coolant (CTS); coolant level float switch for machine stop at low level; additional through-spindle coolant flushing (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collection tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic liner • Chuck air blow device for left spindle • Automatic power-off • Preparation for oil mist extraction unit with Ø 150 mm connection stub • Robot/automation preparation: pneumatic flap for robot handling at the top of the door, opening approx. 400 x 400 mm • Handwheel for manual travel of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal light The Samsys bar feeder with a 1.5 m bar loading capacity has the following dimensions: length: 225 cm + 43 cm intermediate guide, width: 120 cm (including loading ramp and control panel), height: 145 cm or 180 cm with open flap. The machine was primarily used for processing aluminum (95%). Additional equipment: • Samsys bar feeder including extension • Absolent extraction unit • Hinge belt swarf conveyor with interface, interval time control, and alarm analysis

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 800 mm, kot vrtenja osi B (max.): 105 °, kot vrtenja osi C (maks.): 360 °, This 5-axis milling and turning center, Matec 30 HV, was manufactured in 2010. It features a travelling column design with a 3,000 mm travel range on the X-axis, 600 mm on the Y-axis, and 800 mm on the Z-axis. The B-axis swivels by ±105°, while the C-axis offers 360° rotation, enabling the machining of complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control unit and a rotary table speed of up to 500 rpm, it allows for precise turning and milling operations. For further information about this mill-turn center, please contact us. Additional Equipment Pgsdpfx Ahsx D Dy Hj Ioi • Turning package: Enables high-precision turning operations in combination with standard milling, facilitating both turning and milling within a single setup. Machine Advantages Qualitative Machine Advantages • 5-axis CNC machining center with travelling column, rotary table, and swivel head Technical Machine Advantages • Full 5-axis capability for complex part geometries • The rotary table is fitted with a manual 3-jaw chuck Rota S Plus 800 by Schunk. • There is no hardware runtime counter on the computer. Additional Information Machine still under power

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 580 mm, pomik osi Y: 80 mm, pomik po osi Z: 935 mm, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP-P200L, število osi: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turning-milling center with a bed overhang of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, tool changer, and a tool magazine for 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking for a high-quality turning machine, you should consider the Okuma Multus B300-W we have for sale. Contact us for more information. • ATC / tool magazine: 40 positions • Tool changer • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm • Sub spindle: A2-6 nose; 38–5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment • Bar loader IF • Approximately 60 HSK 63 tool holders Podox D Rvhepfx Ah Isgi • Half a pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets