Stroj za rezkanje odmičnih gredi

Doosan H1000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 3.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 770 mm, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, širina mize: 1.000 mm, dolžina mize: 4.150 mm, obremenitev mize: 4.000 kg, 3-Axis Machining Centre Hedelius - BC 100 MAGNUM X-axis travel: 3500 mm Y-axis travel: 1000 mm Z-axis travel: 770 mm Table length: 4150 mm Table width: 1000 mm Table load capacity: 4000 kg Feed rate X-axis: 30,000 mm/min Feed rate Y-axis: 30,000 mm/min Feed rate Z-axis: 30,000 mm/min Tool holder: 50 ISO/BT/MK Spindle power: 50 kW Spindle speed: 4,500 rpm Redpowycmmsfx Ag Tsp Tool changer: 50 positions Number of controlled axes: 3 Chip conveyor: yes Coolant system: yes Length: 8,000 mm Width: 5,000 mm Height: 3,700 mm Weight: 30,000 kg

Stanje: rabljeno, Leto izdelave: 2018, Control system: CELOS / F31iB5 / Mapps 4S Max. turning diameter: 670 mm Turning length: 1,538 mm Max. bar capacity: 81 mm X1-axis: 675 mm Y-axis: mm Z1-axis: 1,562 + 164 mm B-axis: ° A-axis: 1,542 mm X2-axis: 200 mm Y2-axis: +/- 40 mm Z2-axis: 1,542 mm Max. spindle speed: 4,000 rpm Drive power: 26 / 22 kW Spindle bore: Ø 91 mm Max. spindle speed: 5,000 rpm Drive power: 22 / 18.5 kW Spindle bore: Ø 73 mm Speed range: 0 – 12,000 rpm Drive power: 28 / 23 kW Tool holder: Capto C6 Number of tool positions: 76 Max. tool diameter: Ø 70 / Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Number of tool holders: 10 Shank length for square tools: 20 mm Shank diameter for boring bars: Ø 32 mm Drive power: 5.5 / 5.5 / 3.7 kW Torque: 16.9 / 13.1 / 8 Nm X-axis rapid traverse: 50 m/min Y-axis rapid traverse: 40 m/min Z-axis rapid traverse: 50 m/min A-axis rapid traverse: 36 m/min X2-axis rapid traverse: 25 m/min Y2-axis rapid traverse: 18 m/min Z2-axis rapid traverse: 40 m/min B-axis rotation speed: 100 rpm Hollow clamping device: Ø 67 mm Operating hours: approx. 23,250 h Spindle hours: approx. 8 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Kitagawa hollow chuck on main and sub-spindle - Foot switch (double) for spindle 1 and spindle 2 - Full indexing of the tool spindle - Turret tailstock function - Suitable coolant type: water-soluble coolant - Chip conveyor - Coolant system 70 bar, manuf. Hydrajet - Air blow at spindle 1 and spindle 2 - Automatic measuring arm at main spindle - Workpiece ejector at the spindle - Parts unloader - Prepared for bar feeder - Interface for mist separator - 2x RotorClear - 4-color signal lamp Rjdpfxoyfh R Hs Ag Tep - Multi-dry filter - Automatic probing and tool correction - Memory expansion - Cycle for plane transformation - Coolant spray gun Accessories, depicted tools and clamping devices are only included in the scope of delivery if specified in the additional information. Modifications and errors in technical data and information as well as prior sale reserved!

Stanje: zelo dobro (rabljeno), Workpiece diameter - max. 600 mm Thread length: 7000 mm Module - max. 8 / 12 Module - min. 1 Swivel range: ° Cutter diameter: 63 - 140 mm Spindle speeds - stepless: 45 - 450 rpm Machine weight: approx. 12.5 t Space requirement: approx. 9.0 x 2.0 x 2.2 m Condition: Well maintained, checked and partially overhauled by specialist company. The existing milling head has been replaced by an overhauled universal milling head. Equipment: Differential for angled machining Redpjwgizdefx Ag Tjp Automatic indexing device (interchangeable index plates!) for splined and multi-start components; also extensive set of bushings, support rollers and around 70 change gears. Conversion of milling head speed control to frequency inverter with corresponding high-performance motor is a great advantage and saves much setup time. Accessories: Around 70 change gears, 3 bushing setting tools of various sizes, about 20 bushings, 2 roller supports, 2 centers for direct mounting on the clamping spindle, 350 mm chuck, 2 spare index plates.

Stanje: zelo dobro (rabljeno), Travel paths: 510 x 360 x 300 mm Table size: 600 x 360 mm Spindle taper: BT30 Spindle speeds: up to 12,000 rpm Tool changer: 20 positions Control: FANUC 18i-MB Through-spindle coolant Various accessories Rodpfeuy S Hbex Ag Top MARCELS MASCHINEN CH

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2006, CNC univerzalni rezkalni in vrtalni stroj DECKEL MAHO DMU 80 P duoBlock Z vodenjem poti MILL PLUS iT Letnik: 2006 Pomiki: X 800 Y 800 Z 800 Območje vrtljajev: 0 – 8.000 min⁻¹ brezstopenjsko (SK 50) Z naslednjo opremo: NC okrogla miza 900 mm x 700 mm vpenjalna površina (max. obremenitev mize 1,4 t) Univerzalna rezkalna glava z gnano osjo B Univerzalni menjalec orodij z 40 mesti v magazinu, dvojni grabilnik (SK 50) Polna zaščitna kabina z drsnimi vrati in notranjo osvetlitvijo IKZ – 40 bar Transporter za ostružke Rotoclear 3D merilna tipala Heidenhain TS 641 Način delovanja 3 + 4 Elektronski ročni kolešček 50 kosov držal orodij SK 50 Rodpfexn Aczjx Ag Top 3 kos nastavljive strojne noge po višini Transportna oprema Navodila za uporabo

Stanje: rabljeno, Manufacturer: LORENZ Model: LS 630 Condition: Used Stock Number: DCL1722 Module: 12 Max. Diameter: 630 mm Rsdpfowr Dx Uex Ag Tsp Working Stroke: 220 mm Distance Table/Spindle Center: 450 mm Machine Weight: 10,000 kg Table Bore Diameter: 450 mm Table Diameter: 730 mm Spindle Diameter: 110 mm Distance Table to Spindle: 580 mm

Stanje: rabljeno, Leto izdelave: 2014, Workpiece length: 100 mm Swing diameter: 80 mm Number of spindles: 2 Rodpfovx Uvfsx Ag Tjp Control system: FANUC 31i-B5 Workpiece weight: 2.00 kg Centre height: 170 mm Grinding wheel diameter: 100 mm Grinding wheel bore: 32 mm Max. grinding wheel width: 20 mm Max. peripheral speed: 125 m/sec Steady rest passage: 45 - 60 mm Total connected load: 75.00 kW Machine weight approx.: 25.00 t Space requirement approx.: 5.00 x 3.50 x H3.50 m Cam grinding machine for cam components. Equipped with FANUC 31i-B5 control for non-cylindrical grinding; loading gantry; CO2 extinguishing system; suitable for CBN grinding wheels; tailstock; steady rest; diamond wheel dresser for the grinding wheel mounted on the dressing spindle; grinding spindle stock version 12 (two grinding spindles independently movable).

Stanje: rabljeno, Leto izdelave: 1992, Technical Details: Spindle diameter: 100 mm X travel: 1500 mm Y travel: 1450 mm Z axis: 930 mm W axis: 506 mm B axis (table): 360° Control system: Heidenhain TNC 407 Tool holder: SK50 Spindle speed: 5 - 1,600 rpm / stepless Table load capacity: 4.0 t Table size: 1100 x 1400 mm Rotary table: 360° Feed rates (X/Y/W/Z axis): 2 - 2000 mm/min Rjdou Idqbjpfx Ag Tep Rapid traverse (X/Y/W/Z axis): 5000 mm/min Total power requirement: 40 kW Switch cabinet dimensions: 2000 x 600 x 2000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Machine weight approx.: 14 t CNC drilling and milling machine with hydraulic power unit Equipment: Measuring probe Electronic handwheel Hydraulic counterbalance Y-axis Universal milling head And a range of accessories – please inquire! Subject to prior sale.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1984, Pressing force: 3,600 kN, Pressing stroke: 1.7 mm, Pressing capacity: 6,120 J. Stroke: 60 mm, Installation height: 340 mm. Table clamping width/depth: 440 mm/525 mm, Tool holder width/depth: 440 mm/320 mm. Dimensions (LxWxH): 1,300 mm x 2,000 mm x 2,230 mm, Weight: approx. 6,300 kg. Rjdsr A Eifopfx Ag Tsp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, OKUMA Euro Center V50 Year of manufacture: 2002 Redjrfw Nhepfx Ag Tep Control system: OSP-U100L Travels: X-axis: 1020 mm Y-axis: 510 mm Z-axis: 525 mm Table load capacity: 680 kg Clamping area: 1200 x 510 mm Tool changer: 20 magazine positions Chip conveyor