CNC stružno-rezalni centri nakup rabljenega (587)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, obratovalne ure: 3.006 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.540 mm, potovalna razdalja osi X: 495 mm, pomik osi Y: 125 mm, pomik po osi Z: 1.560 mm, premer nihanja nad prečno desko: 660 mm, model krmilnika: MSX-711 (MAPPS IV), Partially overhauled machine with only approx. 3,000 spindle hours! TECHNICAL DETAILS Turning length: 1,540 mm Max. turning diameter: 610 mm (Turret 2: 274 mm) Swing diameter over bed: 660 mm Swing diameter over cross slide: 660 mm (Turret 2: 300 mm) Turning/milling spindle X-axis travel: 495 mm Y-axis travel: 125 mm Hodpfx Abex An Uxe Tjfr Z-axis travel: 1,560 mm B-axis: 120 degrees Spindle speed: 12,000 rpm Drive power: 18.5/11 kW (10 min./continuous operation) Tool magazine Magazine capacity: 76 positions Tool holder: Capto C6 Lower turret Number of tool stations: 10 Tool change time: 0.19 s Main spindle Spindle speed: 5,000 rpm Main spindle drive power: 22/18.5 kW (30 min./continuous operation) Sub spindle Spindle speed: 5,000 rpm Sub spindle drive power: 22/18.5 kW (30 min./continuous operation) MACHINE DETAILS Control: MSX-711 (MAPPS IV) Operating hours Spindle hours: 3,006 h Operating hours: 4,526 h EQUIPMENT Spindle 2 with tailstock option Electronic handwheel Interface for high-pressure coolant system Chip conveyor Air blower for chuck and tool tip Automatic tool measurement system for upper and lower turrets Bar feeder interface Hobbing function

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, premer struženja: 380 mm, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 230 mm, pomik po osi Z: 575 mm, največja hitrost protivretena: 6.000 obr/min, TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm X-axis travel: 230 mm Z-axis travel: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Hodpfxsx Di Uis Ab Tjfr Sub-spindle speed: 6,000 rpm Sub-spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-station turret with live tooling Interface for bar loading magazine Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction unit Submitting a bid obligates you to collect the machine no later than week 4 of 2026! TECHNICAL DETAILS Machining Area Maximum machining diameter: 380 mm Bar capacity: 77 mm X-axis travel: 230 mm Z-axis travel: 575 mm Spindle Data Main spindle speed: 4,000 rpm Main spindle motor power: 22 kW Sub-spindle speed: 6,000 rpm Sub-spindle motor power: 7.5 kW MACHINE DETAILS Control: Mazatrol 640T Nexus EQUIPMENT 12-station turret with live tooling Interface for bar loading magazine Short bar loader Multifeed MLI 3-jaw chuck Kitagawa B-210 3-jaw chuck Kitagawa B-206 Automatic parts catcher with conveyor belt Oil mist extraction unit High-pressure coolant: 5 bar Chip conveyor High-pressure coolant: 5 bar Chip conveyor

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 12.125 h, Krmilna enota Blagovna znamka: SIEMENS Model: SINUMERIK 840D Krmilnik Blagovna znamka: SINUMERIK 840D Glavni pogon Območje hitrosti vretena: 0–5000 min⁻¹ Moč motorja vretena: 29 kW Število osi: 6 Dodatna oprema Hjdpfxex D Hwnj Ab Tjfr Revolver za orodje: 12-pozicijski VDI 30 radialni revolver z logiko smeri za do 12 pogonjenih postaj orodja B-PowerMill: Motorizirano rezkalno vreteno z 24-pozicijskim magazinom orodja, 210° zasučno območje Opcijski paket orodij: vključuje nosilce fiksnih in pogonjenih orodij, nosilce kleščnih vpenjal, reducirne tule, in delovne ključe Votli vpenjalni cilinder z vlečno cevjo / Izmetalec kosov in splakovanje skozi protivreteno / Naprava za pobiranje kosov za gotove dele Naprava za pobiranje gotovih delov / Naprava za hlajenje v transportnem traku za odrezke / Visokotlačna črpalka (14 bar) in fini filter Izplakovalne črpalke (3,7 bar) / Klima naprava za elektro omaro / Elektrostatni separator oljne meglice Hidravlična enota / Strojna luč / Vmesnik za nožno stikalo / Signalna luč Dokumentacija vključno z ročnim upravljalcem, PC tipkovnico, mrežno pripravo, nadzorom orodja, stružnim oknom, čistilno pištolo Vpenjalna naprava za glavno vreteno: Hainbuch BZI 80 centrično vpenjanje Ta 6-osni EMCO Hyperturn 665MC Plus CNC stružno-rezkalni center je bil izdelan leta 2008. Opremljen je s CNC sistemom z Y-osjo in B-osjo za celovito obdelavo struženih in frezanih delov. Z integriranimi motorji na glavnem in protivretenu omogoča glavno vreteno do 5000 min⁻¹ in protivreteno do 7000 min⁻¹. Vključuje 24-pozicijski magazin orodja in krmiljenje SINUMERIK 840D. Če iščete kakovostne sposobnosti struženja in rezkanja, razmislite o stroju EMCO Hyperturn 665MC Plus iz naše ponudbe. Kontaktirajte nas za več informacij o stroju. Vrsta uporabe Struženje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 800 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 725 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 260 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 610 mm, vrtilni moment: 250 Nm, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with SIEMENS Sinumerik ONE ShopTurn control system! CNC turning center designed for complete machining of turned/milled parts, featuring integrated spindle motors, counter spindle (water-cooled, preloaded roller guides), and Y-axis at both main and sub spindles. Latest SINUMERIK ONE with ShopTurn conversational programming. Main spindle: • Max. bar capacity: 65 mm Hsdex E Dncjpfx Ab Tjfr • Max. torque: 250 Nm • Speed range: 0–5,000 rpm Counter spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0–7,000 rpm Tool turret: • 12-position VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5,000 rpm Y-axis: • Travel: +/- 40 mm Additional features: • Hollow clamping cylinder incl. draw tube • C-axis for main and sub spindle • Sinumerik ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D Simulation • Residual material detection • USB interface • Control cabinet air conditioning • Coolant system incl. pump (3.5 bar) • Chuck washing (additional pump 3.5 bar) • Part ejector and flushing through the sub spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate • Machine control languages: German/English • Electronic handwheel • EMCO TOOL BREAKAGE AND WEAR MONITORING (SINUMERIK ONE) • Alternating spindle speed Counter spindle as tailstock: This function allows the counter spindle fitted with a live center to support workpieces. Shaft components can thus be supported and machined in machines without a traditional tailstock by using the counter spindle. Max. support force is limited to 50% of the max. axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration via HARTING connector. Signal exchange via Profinet with 2-channel, potential-free safety signals. Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE INTERFACE for MDE/BDE (machine/data acquisition) system integration, standard delivery includes: • Machine ON – AUX ON • Automatic mode • Production operation – program active • Program running and override between 95–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D MACHINE DATA / MT65-G2: 3D model of the machine, including pneumatically operated finished part catcher for gentle unloading of finished components. Parts can be sent to a catch box (standard) or conveyor belt (option). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connection of the EMCO SL1200 short bar loader. ...and more. The machine is immediately available!

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840 Dsl, Description: General: Year of Manufacture: 2013 Control: Siemens 840 Dsl Turning length: 1,185 mm Swing diameter: 540 mm Bar capacity: 75 mm Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 32 kW Max. torque: 360 Nm Chuck: SMW KNCS-N 260-78 C-axis: 0.001° Flushing: Chuck flushing Sub Spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 32 kW Max. torque: 360 Nm Chuck: SMW KNCS-N 260-78 C-axis: 0.001° Flushing: Chuck flushing + through spindle cooling Tool Carrier I (X/Y/Z/B): Hfjdpfoxl Nfqex Ab Ter Technology: Milling spindle on moving column Milling spindle speed: 12,000 rpm Max. power: 22 kW Tool interface: Capto C6 X-axis: 450 mm Y-axis: 200 mm Z-axis: 1,200 mm B-axis: +/- 110° Position measuring systems: Direct (glass scales) Tool Carrier II (/X/Y/Z): Technology: Tool turret on cross-slide Tool drive: Direct drive Speed: 10,000 rpm Power: 14 kW Torque: 34 Nm X-axis: 195 mm Y-axis: 80 mm Z-axis: 1,200 mm Tool interface: VDI 40 Number of tool stations: 12 pcs Automation: Technology: Gantry loader with stacking magazine Workpiece diameter: 50 – 200 mm Max. workpiece height: 230 mm Max. workpiece weight: 15 kg Number of stack adapters: 20 pcs Max. load per stack adapter: 40 kg Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system (IKZ), 80 bar Tool magazine: Chain magazine, 120 stations Workpiece measurement: Renishaw measuring probe Tool breakage monitoring: Swing wire Automation: Gantry loader with stacking magazine Emulsion mist separator: Mechanical Setup mode: Electronic handwheel Work area door: Automatic Chucks: 2x SMW KNCS 260 Tool holders: Various Capto C6 holders

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 40.807 h, Funkcionalnost: nepreverjeno, Full 5 axes. Max. swing diameter over cross slide ø658 mm (ø25.9"). Max. machining diameter (upper turret) ø658 mm (ø25.9"). Max. machining length 2,497 mm (98.31"). Max. bar capacity ø102 mm (ø4.02"). X-axis travel 615 mm (24.21"). Z-axis travel 2,563 mm (100.91"). Y-axis travel 260 mm (10.24"). B-axis indexing range -30° to 210°. Main spindle chuck size 12". Main spindle speed 1 – 3,300 rpm. Main spindle nose A2-8. Main spindle bore ø112 mm (ø4.41"). Main spindle indexing increment 0.0001°. Hydraulic chuck for sub spindle (10" through chuck B-210A0815X). Sub spindle speed 1 – 4,000 rpm. Sub spindle travel (W-axis) 2,175 mm (85.63"). Main spindle nose – A2-8. Main spindle bore – ø91 mm (ø3.58"). Bearing ID – ø130 mm (ø5.12"). Min. indexing increment – 0.001°. Milling spindle type: spindle turret with automatic torque control. Milling spindle speed 12,000 rpm. Max. milling spindle torque 120 Nm (88.5 ft·lbs). Turning tool shank height 25 mm (1"). Boring bar shank diameter ø40 mm (ø1.5"). Rapid traverse speed: X-axis 50 m/min (1969 ipm). Rapid traverse speed: Z-axis 40 m/min (1575 ipm). Rapid traverse speed: Y-axis 40 m/min (1575 ipm). Rapid traverse speed: W-axis 30 m/min (1181 ipm). Tool holder shank HSK-A63 (T63). Tool magazine capacity: 72 tools. Max. tool diameter/length (from measuring position) ø90 mm (ø3.54") (with adjacent tool stations empty: ø125 mm (ø4.92"))/400 mm (15.75"). Max. tool weight 12 kg (26.46 lbs). S/N 285804 (2018/04). Note: No tools included in delivery. Hfsdexdbuujpfx Ab Tsr Equipped with Mazatrol SMOOTH X control. Hydrafeed MSV110 bar feeder S/N C02-18L28. SMW-AUTOBLOCK Telbrook T-17915 SLU-X 3.2 steady rest, ø50–200 mm. Filtration Service Engineering E7377 chip management system S/N 21025 (2019). Automatic tool changer (upper turret). Dual foot pedal switch for chuck operation. Through spindle coolant. Simultaneous delivery of 0.5 MPa (70 psi) coolant through spindle and upper turret coolant supply. Long drill holder, tool length 400 – 1,000 mm, max. ø80 mm. Machine dimensions: L 6,390 mm x W 2,945.5 mm x H 2,770 mm. Machine weight 20,400 kg.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-axis CNC turning center with automatic tool changer, Y-axis, and B-axis, designed for complete machining of turning-milling components. Integrated spindle motors (ISM) on main and counter spindles with a liquid-cooled thermal compensation system. Drive output: Main spindle – 29 kW Counter spindle – 22 kW Speed range: Main spindle: 0-5000 rpm Counter spindle: 0-7000 rpm Spindle interface (DIN 55026): Main spindle: KK 6 (bar capacity 65 mm) Counter spindle: KK 6 Y-axis: Travel range +/- 50 mm The Y-axis is engineered to distribute cutting forces across two axes, resulting in extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motor-driven milling spindle with a 24-position tool magazine is integrated into the upper slide system. Swivel range of 210° is steplessly adjustable and can be interpolated. Preloaded roller guides on all linear axes, digital drive system, integrated spindle encoder, state-of-the-art SINUMERIK 840D CNC control, includes: * Hollow clamping cylinder incl. draw tube * Parts ejector and flushing through counter spindle * 12-position radial VDI 30 tool turret with directional logic for up to 12 live tool stations Swivel speed adjustable via feed switch Performance data: Max. 6.7 kW at 2650 rpm Constant torque: 25 Nm Speed range: 0–5000 rpm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming * Finished part catcher * Sinumerik 840D * Chip conveyor with programmable discharge height of 1200 mm (type "hinge belt") * Coolant system integrated in chip conveyor 1 high-pressure pump with 14 bar 1 high-pressure pump with 14 bar incl. 20 µm fine filter 2 rinse pumps with 3.7 bar * Electrical cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit Hedpfx Aoxz Ab Rjb Tjfr * Machine light * Interface for foot switch * Documentation Including: - Handwheel - PC keyboard - Network preparation - Tool monitoring - Turning window - Cleaning pistol - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, The used SPINNER TC77 SMCY CNC lathe with Y-axis and subspindle is a robust CNC lathe with an inclined bed and flat guides, size ASA 8", equipped with a BARUFFALDI 2-speed automatic gear range changer, featuring both a subspindle and main spindle with "C" axis, as well as a Y-axis powered turret with 120mm stroke (+60/-60 mm) VDI 50. Configuration includes a FANUC i series CNC with color LCD and Manual Guide i conversational programming, ethernet interface, RS232 port, and memory card slot for program input, chip conveyor, 315mm 3-jaw hydraulic chuck (main spindle), a set of 10 driven tool holders plus various stationary holders, and a wide selection of jaws. Main features: - Max. turning diameter: 690 mm - Max. standard turning diameter: 500 mm - Max. workpiece length: 800 mm - Max. bar diameter, main spindle: 77 mm - Max. bar diameter, subspindle: 52 mm - Main spindle chuck: 315 mm - Subspindle chuck: 210 mm - Max. X-axis travel: 360 mm - Max. Y-axis travel: 120 mm (-55/+65) - Max. Z-axis travel: 980 mm - Main spindle: ASA 8" 26 kW, up to 1,030 Nm torque, max. 4,000 rpm - Subspindle: ASA 6" 18 kW, up to 113 Nm torque, max. 4,000 rpm - 12-position VDI 50 turret (driven tools 4,000 rpm) Hfjdpfsuizukjx Ab Tor - Machine weight: approx. 6,000 kg Year of manufacture: 2006, installed in 2008, with approx. 5,800 operating hours; CE compliant, complete with manuals.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 18.504 h, Splošni podatki Teža stroja: 20.000 kg Krmilna enota Proizvajalec: SIEMENS Model: Sinumerik 840D Powerline Glavni pogon Območje hitrosti vretena: 4.000 Število osi: 7 Pomiki Pomik X-osi: 550 mm Pomik Y-osi: 110 mm Revolver Število revolverjev: 1 Orodja Hodpfjx D S Dgsx Ab Tefr Število pozicij v orodnem magazinu: 60 Število postaj na revolverju: 12 Največja dolžina orodja: 350 mm Tip držala orodja: HSK-A63 Dodatna oprema Odvod oljne meglice Rezervoar za hladilno tekočino s tračnim filtrom Notranji hladilni sistem s pritiskom 80 bar Približno 30 držal za orodja Stroj DMG Gildemeister GMX 400 linear s 7 osmi, letnik 2004, omogoča največji premer struženja 640 mm in dolžino struženja 1.585 mm. Opremljen je z upravljanjem Sinumerik 840D Powerline, rezkalno vreteno z največjo hitrostjo 12.000 vrt/min ter orodnim magazinom do 120 pozicij. Če iščete vrhunsko zmogljivost kombiniranega stružno-rezkalnega stroja, razmislite o DMG Gildemeister GMX 400 linear, ki ga imamo na voljo. Za več informacij nas kontaktirajte. Uporabna področja Struženje

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 123, hitrost vretena (min.): 200 obr/min, največja hitrost vretena: 10.000 obr/min, skupna višina: 2.200 mm, skupna dolžina: 9.000 mm, skupna širina: 1.500 mm, skupna masa: 5.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: SERIES 32i-MODEL B, hitrost proti vretena (min.): 200 obr/min, največja hitrost protivretena: 10.000 obr/min, TSUGAMI B0266E-II CNC Sliding Headstock Automatic Lathe - Operating voltage: 200 V - Frequency: 50 Hz - Rated current: 21.4 A - Max. bar stock clamping diameter: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Deep hole drilling diameter: 10 mm - Max. clamping diameter counter spindle: 26 mm - Max. drilling diameter counter spindle: 10 mm - Max. tapping diameter counter spindle: M10 - Max. drilling diameter tool spindle: 8 mm (front/rear tool holders) - Max. tapping diameter tool spindle: M6 (front/rear tool holders) Hfodpfjx Hxz Hex Ab Tor - Max. slot milling cutter diameter tool spindle: 45 mm - Rotating guide bushing speed: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min, rapid traverse X1 and Y1: 24 m/min, Y2: 24 m/min - Controllable axes: 6 The machine is equipped with a bar feeder from FMB, type: TURBO 3-36, and a chip conveyor. Note: The item must be picked up definitively between 04 and 12 March 2026, on a date to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Fanuc krmiljenje, dva revolverja, Y-os, protivretje, podajalnik za kratke palice, Hodpfx Aex Hpiusb Tsfr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, obratovalne ure: 64.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 4.500 mm, WFL M60 x 4500 Turning, Milling, and Drilling Center with 5 Axes Manufacturer: WFL MILLTURN Model: M60 x 4500 Location: Europe Year of manufacture: 2005 Turning length: 4,500 mm For all technical details, please refer to the attached technical documentation and photos. Below is a summary of the main specifications: Lubrication and Cooling Systems Centralized lubrication system Tank capacity: 6 l Oil type: ISO VG 68 Flow rate: 0.5 l/min Max. pressure: 27 bar Minimum quantity lubrication (MQL) Tank capacity: 6 l Oil type: Klübersynth GH 6–100 Flow rate: 0.5 l/min Max. pressure: 27 bar Hfedpfx Asx H Awfsb Tsr Pneumatic System Air consumption: approx. 200 l/min Operating pressure: 6 bar Working Area Nominal length (turning length): 4,500 mm Swing diameter over bed (X-axis linear guide): 690 mm Swing diameter over cross-slide: 610 mm Swing diameter over telescopic covers: 650 – 730 mm Swing diameter over steady rest: 530 mm Spindle center height above floor: 1,193 mm Main Spindle Spindle nose: DIN 55026, Form A, Size 11 Front bearing: Ø 160 mm Rear bearing: Ø 150 mm Spindle bore: Ø 115 mm Draw tube passage: depends on used chuck type Main Drive Motor power (at 100% duty cycle): 40 kW Spindle torque (gear 1 / 2): 1,830 / 458 Nm Overall speed range: 8 – 3,300 rpm Gear 1: 8 – 825 rpm Gear 2: 33 – 3,300 rpm Upper Cross-Slide (X/Z) Feed force (Z / X): 2,000 daN Ball screws (Z / X): 63 × 20 / 63 × 10 mm Rapid traverse (Z / X): 20 / 15 m/min Travel Z-axis: 4,650 mm Travel X-axis: 700 mm (+670 / −30) Milling and Drilling Unit Max. spindle power: 25 kW Max. spindle torque: 300 Nm Front spindle diameter: 100 mm Speed range: 10 – 4,000 rpm Y-axis travel: 300 mm (+175 / −125) Y-axis rapid traverse: 12.5 m/min Y-axis feed force: 1,500 daN Ball screw Y: 40 × 5 mm B-axis torque: 1,200 Nm B-axis swivel range: 200° (−110° / +90°) Tool interface: SANDVIK Capto C8 C-Axis Max. speed: 25 rpm Max. torque: 1,500 Nm Smallest programmable increment: 0.001° Clamping torque (disk brake): 4,000 Nm This offer is non-binding and subject to prior sale. We are happy to answer any questions you may have, provide a more detailed specification of the equipment, or coordinate further details (e.g., clamping devices, tool packages, commissioning, and training).

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Well-maintained EMCO Hyperturn 665 MC Plus for sale, equipped with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Machine was used exclusively for brass components! CNC Turning and Milling Center | EMCO - HYPERTURN 665 MC Plus with main/ sub-spindle, C + Y axis, 2 turrets each with 12 positions for live tooling! Technical data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Travel – X: 270 mm Travel – Z: 750 mm Travel – X2: 205 mm Travel – Z2: 750 mm Travel – Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2 x 12 positions, all live! Tool mounting: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow clamping cylinder) C12 spindle: 45 mm diameter (solid clamping cylinder) with part ejector Tool turret type: Sauter 2 x 14 bar high-pressure pumps Accessories: - Complete tool cabinet with toolholders (live and static) as well as carbide inserts and toolholders - Collet chucks for main and sub-spindle - Complete documentation - and more Machine available immediately! Machine ready for operation immediately! Machine will be loaded by us! Transport can be organized upon request! Hfedpfx Abexzq Nce Tjr

Stanje: rabljeno, Leto izdelave: 2010, stružna dolžina: 6.500 mm, premer struženja: 880 mm, izvrtina vretena: 165 mm, proizvajalec krmilnikov: Siemens, model krmilnika: 840 D, Description: General: Year of manufacture: 2010 Control: Siemens 840 D Turning diameter: 880 (750) mm Swing diameter: 900 mm Turning length: approx. 6,500 mm Spindle bore: 245 mm Tool holder: Capto C8 Main spindle: Technology: Geared spindle Speed: 1,600 rpm Power: 60 kW Torque: 4,472 Nm C-axis: 0.001° Spindle bore: 165 mm 3-jaw chuck: SMW Autoblock KNCS-N-630-165 Tool carrier (X/Y/Z): Technology: Swivel head with milling spindle Hedpfx Asx Axylsb Tofr Speed: 6,000 rpm Power: 30 kW Tool holder: Capto C8 Torque: 315 Nm X-axis: 920 mm Y-axis: 500 mm (-200/+300 mm) Z-axis: 6,870 mm B-axis: 200° (-110°/+90°) Tailstock + Steadies: Quill diameter: 180 mm Quill stroke: 200 mm Steady rest slides: 2 units, 400 mm wide Steady I: SMW Autoblock SLU (45 - 310 mm) Steady II: SMW Autoblock SLU (125 - 460 mm) Tool Magazine I: Technology: Wheel magazine (double) Number of stations: 72 pcs Tool changer: Double gripper on shuttle Max. tool diameter: 110 mm (250 mm) Max. tool length: 800 mm Max. tool weight: 25 kg Tool Magazine II: Technology: Pick-up magazine Max. usable length: 1,550 mm Max. usable weight: 150 kg Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system (IKZ) 80 bar Coolant temperature control: Immersion recooler Workpiece measurement: Wireless probe Emulsion mist extractor: LTA air clean Work area door: Automatic Setup operation: Electronic handwheel Tools: Various Capto C8 holders Steady rest: 2x SMW Autoblock steady rest 3-jaw chuck: SMW Autoblock KNCS-N-630-165

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Splošni podatki Teža stroja: 620 kg Glavni pogon Število osi: 6 Hitrost vretena: 5000 min⁻¹ Moč motorja vretena: 29 kW Hsdpfsx D E Hbex Ab Tsfr Ta 6-osni EMCO Hyperturn 65 Powermill G2 je bil izdelan leta 2022. Gre za zelo produktiven CNC stružno-rezkalni center z glavnim in podvretenom, oba z maksimalnim navorom 250 Nm in hitrostjo do 5000 min⁻¹. Rezkalno vreteno omogoča do 12000 min⁻¹. Vključen je 40-pozicijski magazin za orodje, 12-pozicijski revolver in napreden krmilni sistem Sinumerik ONE. Če iščete visokokakovostno struženje in rezkanje, razmislite o nakupu stroja EMCO Hyperturn 65 Powermill G2 pri nas. Za dodatne informacije nas kontaktirajte. Vrste uporabe Struženje

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 22012A, hitrost vretena (min.): 200 obr/min, največja hitrost vretena: 10.000 obr/min, skupna višina: 2.200 mm, skupna dolžina: 9.000 mm, skupna širina: 1.500 mm, skupna masa: 5.000 kg, proizvajalec krmilnikov: FANUC, model krmilnika: SERIES 32-i MODEL B, hitrost proti vretena (min.): 200 obr/min, največja hitrost protivretena: 10.000 obr/min, TSUGAMI B0266E-II CNC automatic lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 64 A - Max. bar capacity: 26 mm - Max. machining length: 320 mm (synchronously driven guide bushing) - Without guide bushing: 50 mm - Max. drilling diameter: 12 mm - Max. tapping diameter: M10 - Deep drilling diameter: 10 mm - Max. sub-spindle clamping diameter: 26 mm - Max. sub-spindle drilling diameter: 10 mm - Max. sub-spindle tapping diameter: M10 - Max. tool spindle drilling diameter: 8 mm (front/rear tool holder) - Max. tool spindle tapping diameter: M6 (front/rear tool holder) - Max. tool spindle slot milling cutter diameter: 45 mm - Rotating guide bushing: 200 - 10,000 rpm (synchronously driven) - Tool spindle speed: 200 - 6,000 rpm - Total number of tools (standard specification): 31 - Tool size: 16 mm square x 100 mm - Rapid traverse: 32 m/min, rapid traverse in X1 and Y1: 24 m/min, in Y2: 24 m/min - Controllable axes: 6 Hjdpfxex Hxy Aj Ab Tjfr The machine is equipped with a bar feeder from FMB, type: TURBO 3-36, as well as a chip conveyor. Note: The item must be collected between 04 and 12 March 2026 on a binding date to be coordinated. FCA D-75181 Pforzheim – loaded onto truck.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, obratovalne ure: 7.100 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 650 mm, premer struženja nad prečnim suportom: 350 mm, premer struženja: 385 mm, hitrost vretena (min.): 4.500 obr/min, izvrtina vretena: 67 mm, potovalna razdalja osi X: 255 mm, pomik po osi Z: 800 mm, For sale: Used DMG NEF400 V3 5th Generation ISM 2-axis universal lathe with C-axis. Hsdpfjxzqnrsx Ab Tefr Travel distance: X: 255 mm Z: 800 mm Swing diameter over bed: 385 mm Maximum swing: 350 mm Turning length: 650 mm Equipment: - Main spindle with integrated spindle motor - Speed: Max. 4,500 rpm - Drive power: 8.0 / 11.5 kW (100/40% duty cycle) - 12-position disc turret VDI30, 6 driven positions - C-axis and spindle brake (hydraulic) - Automatic tailstock, MK4 taper, Travel: 680 mm - CNC control Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate, and ShopTurn 3G - Operating system: Linux - Technology cycle for applying alternating spindle speed for vibration-critical setups - Manual tool measurement system in work area - Hydraulic power unit - Coolant spray gun - Mechanical oil mist separator - Reinforced coolant pump, 12 bar, 23 l/min - Chip conveyor, discharge height 1,250 mm to the right - Bar machining package including: - Workpiece pick-up device with conveyor to the left for parts max. 65 mm diameter, 150 mm length, weight up to 3 kg - Hollow chucking device, draw tube inner diameter max. 67 mm - Interface for bar loader magazine - Foot switch for tailstock activation - Hydraulic 3-jaw chuck SMW-AUTOBLOK RMS sensor (Relocation Machine Security) Machine available immediately! Machine is ready for operation! We will load the machine for you! Transport can be arranged upon request!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Transporter ostružkov: Da Dodatna oprema: Pogonska orodja Ta 4-osni stružni stroj HAAS ST-15Y je bil izdelan leta 2019 in ima Y- in C-os z pogonskimi orodji, hidravlično vpenjalno glavo D210, premer vretena 65 mm, hidravlično programabilno konico, revolver z 12 postajami VDI-40 ter transporter ostružkov. Če iščete visokokakovostne zmogljivosti struženja, priporočamo HAAS ST-15Y, ki ga imamo v prodaji. Kontaktirajte nas za več informacij. Hfjdpfx Abex D Rags Tjr Vrste uporabe: Struženje

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 310163917, potovalna razdalja osi X: 150 mm, pomik po osi Z: 250 mm, skupna višina: 2.200 mm, skupna dolžina: 3.000 mm, skupna širina: 2.000 mm, skupna masa: 4.000 kg, proizvajalec krmilnikov: MAZAK, model krmilnika: MAZATROL 640 T, MAZAK SUPERQUICKTURN 100 M CNC stružnica - Obratovalna napetost: 200 V Hfedex Hwguopfx Ab Ter - Frekvenca: 50/60 Hz - Nazivni tok: 89 A - Priključek: 17,8 kVA Stroj je opremljen z konjičkom in 12-pozicijskim revolverskim držalom za orodje, vključno z gnanimi orodnimi postajami. Pozor: Artikel mora biti obvezno prevzet med 04. in 12.03.2026 na točno dogovorjen termin. FCA D-75181 Pforzheim – naloženo na tovornjak.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, obratovalne ure: 9.080 h, Funkcionalnost: popolnoma funkcionalen, For sale: Well-maintained CNC Turning and Milling Center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control! Only approx. 9,000 operating hours! Travel Paths: X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Equipment and Accessories: - Turret: 12 positions, all driven - Driven tool speed: max. 10,000 rpm - Parts catcher - Power supply: 400 V - Power consumption: 37.6 KVA - Internal coolant system - Main spindle chuck: Kitagawa BB210AB - Sub spindle chuck: Kitagawa B206A521F - Turning diameter: 366 mm - Turning length: 705 mm - Hollow spindle: 80 mm Hodpfjxzqhrex Ab Tjfr - Main spindle max. speed: 4,000 rpm, with 3-jaw chuck - Power: 18.5 kW - Sub spindle max. speed: 6,000 rpm, with 3-jaw chuck - Chip conveyor - Tool measurement system in the working area - Manual measuring arm for sub spindle - Short bar loader, manufacturer: LNS - Includes tooling: 8 fixed tools, 3 driven tools - Incl. extraction unit, manufacturer: Indusa - Complete documentation included Machine available immediately! The machine has been fully cleaned and inspected! Loading handled by us! Transport can be organized upon request!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, Splošni podatki Dimenzije širina 2710 mm Dimenzije globina 3900 mm Dimenzije višina 2470 mm Hodpfx Abjx D R U Rs Tjfr Teža stroja 10000 kg Glavni pogon Območje vrtljajev vretena 5000 vrt/min Moč motorja vretena 14/17 kW Število osi 5 Dodatna oprema Dinamično dvotlačno vpenjanje za glavno in protivreteno Funkcija konjička za protivreteno s stopalko Ta 5-osni stroj DMG MORI CLX 450 TC + Robo2GO je bil proizveden leta 2024. Opremljen je z univerzalnim stružno-rezkalnim centrom z glavnimi vrtljaji vretena do 5000 vrt/min in rezkalnim vretenom do 12000 vrt/min. Stroj ponuja B-os z območjem ±120°, pomik Y-osi ±100 mm in 30-pozicijski verižni magazin orodij. Za natančnost skrbi krmilnik Siemens 840D sl. Izkoristite priložnost za nakup tega stružno-rezkalnega centra DMG MORI CLX 450 TC + Robo2GO. Kontaktirajte nas za več informacij. Področja uporabe Struženje

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 64.321 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2SAY0351, stružna dolžina: 350 mm, premer struženja: 114 mm, največja hitrost vretena: 8.000 obr/min, potovalna razdalja osi X: 100 mm, pomik po osi Z: 320 mm, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 10 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 30 Nm, skupna višina: 2.100 mm, skupna dolžina: 2.500 mm, skupna širina: 2.000 mm, skupna masa: 2.500 kg, premer struženja nad ležiščem sani: 325 mm, proizvajalec krmilnikov: FANUC, model krmilnika: SERIES 18i-TB, število mest v zalogovniku orodij: 12, Število pogonskih postaj v orodnem revolverju 1: 6, EMCO MAXXTURN 25 CNC stružnica - Obratovalna napetost: 3 x 400 V - Frekvenca: 50/60 Hz - Nazivni tok: 26 A - Premer prehoda palice: 25,4 mm - Konjična razdalja: 445 mm - Razdalja med vreteni: 485 mm Stroj je opremljen s konjičkom, glavnim vretenom in 12-pozicijsko revolversko glavo za orodja. Stroj ima pogonska orodja (6 kosov) in Y-os. Pozor: brez držal za orodja, vidnih na fotografijah! Hfodpfex Hwfqsx Ab Tor Pozor: artikel je potrebno obvezno prevzeti v terminu, ki ga je treba uskladiti, med 04. in 12.03.2026. FCA D-75181 Pforzheim – naloženo na tovornjak.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 13.392 h, Krmilna enota Znamka: SIEMENS Model: 840D s ShopTurn 3G Glavni pogon Hitrost vretena: 6000 vrt./min Orodni stožec: ISM 52 Synchro Moč motorja vretena: 13 kW Število osi: 3 Mediji Transporter ostružkov: Da Dodatna oprema CELOS izdelki Servisni agent DMG MORI DMG MORI NetService DMG MORI IoT Connector DMG MORI Messenger V2 SERVIS Kamera Konjiček 2x SMW-Autoblok BBD17/52, ki sta vidna tudi na vpenjalni glavi stroja. Dodatna programska oprema (ekscentrično struženje in rezkanje ter cikel za posnemanje zob). Hedjx D Efwjpfx Ab Tofr Ta 3-osni DMG MORI CTX Alpha 500 V6 je bil izdelan leta 2021. Vsestranski stružno-rezkalni center z Siemens 840D krmilnikom, ERGOline vmesnikom in CELOS proizvodno podporo. Omogoča dolžino obdelave 470 mm, maksimalno hitrost 6000 vrt./min in 12-pozicijski Sauter revolver z gnanimi orodji. Idealen za kompleksne obdelovalne naloge. Za dodatne informacije o stroju nas kontaktirajte. Vrste uporabe Struženje

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S2A130951, stružna dolžina: 350 mm, premer struženja: 114 mm, največja hitrost vretena: 8.000 obr/min, potovalna razdalja osi X: 100 mm, pomik po osi Z: 320 mm, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 10 m/min, hitri pomik na osi Z: 30 m/min, vrtilni moment: 30 Nm, skupna višina: 2.100 mm, skupna dolžina: 2.500 mm, skupna širina: 2.000 mm, skupna masa: 2.500 kg, premer struženja nad ležiščem sani: 325 mm, proizvajalec krmilnikov: FANUC, model krmilnika: SERIES 18i-TB, število mest v zalogovniku orodij: 12, Število pogonskih postaj v orodnem revolverju 1: 6, EMCO MAXXTURN 25 CNC stružnica - Obratovalna napetost: 3 x 400 V - Frekvenca: 50/60 Hz - Nazivni tok: 26 A Hjdpfx Abjx Hwano Tefr - Premer prehoda palice: 25,4 mm - Konjična razdalja: 445 mm - Razdalja med vreteni: 485 mm Stroj je opremljen s konjičkom, glavnim vretenom in 12-pozicijsko revolversko glavo za orodja. Stroj ima pogonska orodja (6 kosov) in Y-os. Pozor: brez držal za orodja, vidnih na fotografijah! Pozor: artikel je potrebno obvezno prevzeti v terminu, ki ga je treba uskladiti, med 04. in 12.03.2026. FCA D-75181 Pforzheim – naloženo na tovornjak.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, obratovalne ure: 8.574 h, Allgemeine Daten Maschinengewicht: 9.200 kg Steuerung Hersteller: SIEMENS Hauptantrieb Spindeldrehzahlbereich: 5.000 U/min Anzahl der Achsen: 5 Verfahrwege X-Achse: 750 mm Y-Achse: 200 mm Z-Achse: 1.100 mm Hfjdpfxox D Izbj Ab Ter Werkstück Werkstückdurchmesser: 400 mm Diese 5-Achs-Drehmaschine DMG MORI CLX 450 TC wurde im Jahr 2022 hergestellt und verfügt über einen maximalen Verfahrweg der X-Achse von 750 mm, einen Y-Achsen-Verfahrweg von 200 mm sowie einen Z-Achsen-Verfahrweg von 1.100 mm. Die Maschine bearbeitet Werkstücke bis zu einem maximalen Durchmesser von 400 mm und einer Länge von 1.100 mm sowie einen Stangendurchlass von 65 mm. Die Spindeldrehzahl erreicht bis zu 5.000 U/min. Das Maschinengewicht beträgt 9.200 kg. Wenn Sie auf der Suche nach einer leistungsstarken Drehbearbeitung sind, ist die DMG MORI CLX 450 TC die richtige Maschine. Für weitere Informationen kontaktieren Sie uns gerne. Anwendungsbereiche Drehen