EMCO Hyperturn 665MC Plus

EMCO Hyperturn 665MC Plus

Stanje: rabljeno, Leto izdelave: 2013, proizvajalec krmilnikov: Siemens, model krmilnika: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Part ejector: Pneumatic Travel in Z: 750 mm Tool Carrier I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Carrier II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool capacity: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Nwedpfx Aew Tg Adedysb Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feeding: Short bar loader, EMCO LM 1200 Finished parts removal: Pneumatic workpiece pick-up unit with conveyor belt Oil mist extraction: Mechanical separator, manufacturer Absolent Tool holders: Various fixed and driven holders Additional equipment: Spindle cooling unit

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 109.078 h, potovalna razdalja osi X: 650 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 45.000 m/min, hitri pomik os Y: 45.000 m/min, hitri pomik na osi Z: 45.000 m/min, model krmilnika: Siemens 840 D, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Hermle C30 U Siemens 840D Stroj VKLOP: 109078 h / Vreteno VKLOP: 22117 h - Vreteno HSK-A63 10000 min-1 - 32 mest za orodje - Rotacijska miza SRT 280 mm z integriranim vpenjalnim sistemom SK50 (če ni potrebna, se lahko zapre ali se prilagodi za uporabo kot sistem pritrdilne ničle) - Zunanja dovod hladilne tekočine - Notranja dovod hladilne tekočine s papirnim trakom filtrom 80 bar - Pištola za spiranje ostružkov - Transporter ostružkov - Ročni upravljalni modul - Samodejna kabinska vrata - 32 mest za orodje plus še 87 mest ZM87 - Toplotna kompenzacija - BLUM merjenje orodja Wange Njdpfx Asxcp Sljdyswb - Merilna sonda Renishaw - Posoda za ostružke - Signalna luč Stroj je bil v celoti pregledan in na voljo so geometrijsko poročilo ter meritve krožnosti. Stroj je možno kadarkoli pod elektriko pregledati in preizkusiti. Zelo dobro vzdrževano stanje.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Well-maintained EMCO Hyperturn 665 MC Plus for sale, equipped with IEMCA Master 880MP-E bar feeder, chip conveyor, and high-pressure coolant pumps! Nedpfx Adjxzq Ncoyowb Machine was used exclusively for brass components! CNC Turning and Milling Center | EMCO - HYPERTURN 665 MC Plus with main/ sub-spindle, C + Y axis, 2 turrets each with 12 positions for live tooling! Technical data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840 D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Travel – X: 270 mm Travel – Z: 750 mm Travel – X2: 205 mm Travel – Z2: 750 mm Travel – Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2 x 12 positions, all live! Tool mounting: VDI 30 Upper turret: X, Z, Y axis Lower turret: X, Z axis Sub-spindle left/right movement: Z3 axis C11 spindle: 65 mm diameter (hollow clamping cylinder) C12 spindle: 45 mm diameter (solid clamping cylinder) with part ejector Tool turret type: Sauter 2 x 14 bar high-pressure pumps Accessories: - Complete tool cabinet with toolholders (live and static) as well as carbide inserts and toolholders - Collet chucks for main and sub-spindle - Complete documentation - and more Machine available immediately! Machine ready for operation immediately! Machine will be loaded by us! Transport can be organized upon request!

Stanje: rabljeno, Leto izdelave: 2008, Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840 PL Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub spindle speed: 0 - 7,000 rpm Number of turret stations: 2 x 12 Tool holder: VDI 30 CNC Turning & Milling Center | EMCO - HYPERTURN 665MCPlus with main and sub spindle, C & Y axis, 2x turrets configured for driven tools and Irco Profimat bar feeder, equipped with Knoll SF 1000/Turbo-1 coolant system. The machine has approx. 26,710 hours in production operation. Scope of delivery / Equipment: + 2 spindles: main and sub spindle with C-axis + 2 turrets for driven tools (12 stations each) + Upper turret equipped with Y-axis + Internal coolant supply + Chip conveyor + Irco Profimat bar feeder + Driven tools (straight and angled) + Chucks for main and sub spindle + Extraction system + Workpiece discharge device with conveyor belt + Coolant system Knoll SF 1000/Turbo-1 + Various holders, approx. 80 pcs VDI 30 + Boring bar holder + Jaw holders The machine is in well-maintained condition. Please refer to the offer for further technical details. Nwsdpfx Adjv Rgzkoyeb #Tags: HYPERTURN665 | HYPERTURN-665 | EMCO-HYPERTURN

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 810 mm, premer struženja nad prečnim suportom: 800 mm, premer struženja: 320 mm, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 73 mm, potovalna razdalja osi X: 210 mm, pomik osi Y: 110 mm, pomik po osi Z: 810 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 50 m/min, največja hitrost vrtenja: 6.000 obr/min, CNC FANUC MSX-701 / MAPPS IV CAPACITIES Swing diameter over bed: 800 mm Swing diameter over cross-slide: 800 mm Maximum turning diameter: 320 mm Standard turning diameter: 200 mm Maximum distance between centres: 1,130 mm Maximum turning length: 810 mm Maximum workpiece dimensions: 300 mm TRAVELS Turret X axis 1 & 2: 210 mm Turret Y axis 1 & 2: +65 / -45 mm Turret Z axis 1 & 2: 810 mm Head B axis 2: 920 mm MAIN SPINDLE Maximum spindle speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Nwjdpfswlvlgex Adysb Maximum bar working diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° SUB-SPINDLE Maximum speed: 5,000 rpm Spindle motor power (30 min / continuous): 25/22 kW Maximum bar diameter: 65 mm Spindle bore: 73 mm Spindle diameter at front bearing: 120 mm Spindle nose: JIS A2-6 C-axis resolution: 0.001° FEED RATES Turret 1 rapid traverse X/Y/Z: 30/20/50 m/min Turret 2 rapid traverse X/Y/Z: 30/20/50 m/min TOOL TURRETS Number of turrets: 2 Number of tool stations per turret: 16 Turning tool shank section: 20 x 20 mm Maximum boring bar shank diameter: 32 mm Turret rotation time (1 position): 0.18 sec Max speed of driven tools: 6,000 rpm Driven tool motor power (5 min / continuous): 7.5/5.5 kW DIMENSIONS Footprint with chip conveyor: 5,120 x 2,720 mm Net weight: 8,300 kg Machine equipped with: • High-pressure coolant system • Bar feeder interface • Gantry parts discharge arm • Cut force management and load monitor system • No. 1 double radial driven tool holder • No. 3 axial driven tool holders • No. 2 external tool holders • No. 2 double boring bar tool holders • No. 2 single radial driven tool holders • No. 2 internal boring bar holders • No. 2 Kitagawa BD 208 self-centring chucks, 210 mm diameter • No. 1 set of jaws for each self-centring chuck • Operating manuals and CE Declaration Year of manufacture: 2010

Stanje: dober (rabljeno), Leto izdelave: 2013, BAR AUTOMATIC LATHE TRAUB A 25 2013 Turning length: 65 mm Nwjdowc Amxepfx Adyob Total power requirement: 2 kW Machine weight approx. 0.7 t Space requirement approx. 1200 x 700 x 1600 mm Thread length: 40 mm Maximum part length: 65 mm Spindle speeds: 1400-2800 rpm Bar feeder included!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 850 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 610 mm, premer struženja nad prečnim suportom: 500 mm, premer struženja: 725 mm, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 80 mm, pomik po osi Z: 610 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, dolžina podajanja os X: 260 mm, dolžina pomika po osi Y: 80 mm, dolžina podajanja os Z: 610 mm, vrtilni moment: 250 Nm, prehod palice: 65 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (preloaded roller guides), with Y-axis on main and counter spindle - Latest control technology: SINUMERIK ONE with ShopTurn conversational programming. Main Spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0-5000 rpm Counter Spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0-7000 rpm Turret: • 12-position VDI 30 turret, radial, with direction logic for up to 12 driven tool holders - Max. drive power: 6.7 kW Nwsdpfx Adox E Dnceyeb - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel: +/- 40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/counter spindle • SINUMERIK ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Remnant detection • USB interface • Control cabinet air conditioning • Coolant system incl. coolant pump (3.5 bar) • Chuck wash (additional pump, 3.5 bar) • Parts ejector and coolant through counter spindle • Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: Enables the use of the counter spindle with installed live center for workpiece support. This allows shaft parts to be supported and machined, even on machines without a tailstock, using the counter spindle. Maximum thrust force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for connecting robots (HARTING connector, Profinet communication, dual-channel/potential-free safety signals). Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE interface for connection to MDE/BDE systems. Standard features include: • Machine on – AUX ON • Automatic mode • Production mode – program active • Program running and override between 95%–105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D machine data model included Pneumatically operated finished part catcher for gentle unloading of finished parts: Finished parts are transported either to a catch box (standard) or conveyor belt (optional). Max. finished part length: 175 mm Max. finished part diameter: 65 mm Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the SL1200 short bar feeder from EMCO. ...and more. Machine is available immediately!

Stanje: rabljeno, Leto izdelave: 1986, Grinding diameter: 350 mm Grinding length: 600 mm Njdpfjv Tqqnjx Adyswb Center height: 175 mm Very well-maintained machine. The machine comes from a precision grinding workshop in the Black Forest. It can still be inspected under power at the seller’s site for a short time. In 2022, the machine underwent partial overhaul and maintenance at our facility, including geometry restoration according to the manufacturer’s protocol. Equipment: - 2-axis FAGOR digital readout - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Face grinding attachment - Internal grinding attachment - Internal grinding spindle Fischer UJ70 - Paper band filter - Automatic cycle: roughing – finishing – spark out – return

Stanje: zelo dobro (rabljeno), HERMLE C 42 U je 2 x 5-osni center z nakladalnim robotom, zasnovan za visoko natančnost in zanesljivost. Miza 400×400 mm, 450 kg, hodi X800 Y800 Z550 mm, os A ±130°. Vreteno HSK‑A63 0–18.000 vrt./min, 42 kW, 148 Nm; hitri pomiki 45/45/40 m/min. Magazin 42+160, 54 palet, robot KUKA, IKZ 80 bar, Renishaw/BLUM. Uporaba: avtomobilska industrija, letalstvo, urarstvo, medicinska tehnologija. Nwjdpfxsx S I Aks Adyjb

Stanje: rabljeno, Leto izdelave: 2007, Turning diameter: 300 mm Swing diameter over bed: 430 mm Swing diameter over carriage: 300 mm Control: SIEMENS, SINUMERIK 840 D Travel - X: 160 mm Travel - Z: 510 mm Max. part length: 480 mm Main spindle bore: 53 mm Main spindle speed: 0 - 7000 rpm Spindle nose: DIN 55026 A2-5 Spindle torque: 100 Nm Main spindle motor: 15 kW Sub-spindle bore: 53 mm Nedpswx R Rkjfx Adyswb Sub-spindle speed: 0 - 7000 rpm Spindle nose: DIN 55026 A2-5 Spindle torque: 100 Nm Sub-spindle motor: 15 kW C-axis resolution: 0.001° C-axis rapid traverse: 1000 rpm Tool turret: 1 x 12 stations Number of driven tool stations: 1 x 12 Tool holder: cylindrical shank (DIN 69880) VDI 25 Driven tool speed: 0 - 8000 rpm Torque: 16 Nm Power: 4 kW Feed force X/Z axis: 4000 / 6000 N Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 30 m/min Total power requirement: 38 kVA Machine weight: approx. 4 t Machine dimensions (L x W x H): 2.65 x 1.84 x 2.32 m Accessories: collet chuck 173 E on main spindle, collet chuck 163 E on sub-spindle, bar feeder manufacturer FMB, type turbo 3-36/3200 A, year 2018 for bar diameters up to 36 mm and bar lengths up to 3200 mm; various tool holders for turret (no driven holders), coolant system