Stružnica, debelinka

WOODFAST, WINTER TH530

Stanje: zelo dobro (rabljeno), Width 520 mm Length 264 cm 4 Tersa knives Hydraulic table lift Clean condition, functional You can call or write to us. We speak and write in German and Russian. You can also send us messages in English. Ksdpfxoub Uife Ahvend

Stanje: zelo dobro (rabljeno), One-sided edge banding machine (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Edge thickness in strips/lippings (min/max) mm 3 - 12 Panel thickness (min/max) mm 8 - 60 Control ICOS open TS Feed speed m/min (adjustable) 4 - 20 Upper pressure with V-belt drive Sprayer unit (for liquid anti-adhesive) Jointing milling unit 08.376 (2 x 3 kW) Gluing unit (Hot Melt glue) 283.1513 Edge pressure zone Edge magazine for rolls (compartment no.) 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-functional unit (radius milling and contour milling unit) 08.342 (2 x 0.66 kW) Profile scraper unit 08.519 Knodpeflc Uhefx Ahvod Flat scraper unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Kanterica sa najviše dodatne opreme u svojoj tehnološkoj razini, sa izvrsnim omjerom kvalitete i cijene. Dimenzije radnog stola 3465 x 710 mm Min. ÷ maks. debljina rubne trake (u roli) 0,4 ÷ 3 mm Maks. debljina rubne trake (u trakama) 5 mm Min. ÷ maks. visina panela 8 ÷ 50 mm Min. duljina/širina panela 190/110 mm Brzina pomicanja 9 m/min Ova kanterica povećava produktivnost s brzinom pomicanja panela od 9 m/min i jamči visok standard kvalitete u obradi zahvaljujući mogućnosti rada s poliuretanskim ljepilom, izvođenja utora, a uz sve to je izuzetno jednostavna za korištenje. KOMPOZICIJA STROJA: ME 40TR AUTOMATSKI STROJ ZA LIJEPLJENJE RUBNIH TRAKA 109999 Sigurnosna izvedba Kedjqw Ux Tspfx Ahvond R00341 me 40tr verzija CE 930731 Volt 400 EU 931201 Frekvencija 50 Hz 580653 JEDINICA ZA STRUGANJE RUBOVA 580444 JEDINICA ZA ČETKANJE 580654 JEDINICA ZA STRUGANJE LJEPILA 580656 Rezervna posuda za ljepilo za poliuretansko ljepilo s brzim sustavom za izmjenu kadice 580509 Uređaj za grijanje ruba ploče 580510 Jedinica protiv lijepljenja 580548 Uređaj za raspršivanje (magla) sredstva za završnu obradu rubova 580658 Komplet uređaja za kopiranje "Nesting" za jedinicu za obrezivanje 580659 Komplet uređaja za kopiranje "Nesting" za jedinicu za struganje rubova 580666 Unutarnje osvjetljenje stroja

Stanje: zelo dobro (rabljeno), Single-sided edge banding machine (LEFT) Edge thickness (tape, min/max) mm: 0.3 - 3 Edge thickness (solid strips min/max) mm: 3 - 12 Panel thickness (min/max) mm: 8 - 60 Control system: ICOS open TS Feed speed m/min (adjustable): 4 - 20 Top pressure: Driven by V-belt Sprayer unit (for liquid non-stick agent) Jointing milling unit 08.376 (2 x 3 kW) Gluing unit (hot melt adhesive) 283.1513 Pressure zone for edging Edge magazine for tape (compartment no.): 1 End trimming unit 08.415 (2 x 0.66 kW) Milling unit 08.055 (2 x 1 kW) 0°-30° Multi-function unit (radius and profile milling) 08.342 (2 x 0.66 kW) servo-controlled Profile scraping unit 08.519 Knjdpfxed Nuu Ho Ahvod Flat scraping unit 08.50 Buffing unit 08.612 (2 x 0.25 kW)

Stanje: zelo dobro (rabljeno), SCM S520E Class Thickness Planer Knedpfx Aheup Dkpjvsd Working width: 520 mm Working height: 3–250 mm 4-knife cutterhead Traditional knives 4 feed speeds: 5–8–12–19 m/min Electric adjustment of the worktable height CE certification Operation and maintenance manual (DTR) Main motor power: 5.5 kW Extraction port diameter: 150 mm Machine dimensions: 110x110x115 cm (H) Machine weight: 760 kg

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm Kedpfx Ahehlp D Nsvsnd - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: dober (rabljeno), Leto izdelave: 2002, Edge banding machine with jointing milling unit; otherwise fully equipped. PU glue can be used. Knjdogmn H Ajpfx Ahvsd

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, Connected load 380V Planer shaft motor 4kW 8.3A Feed motor 1x0.37kW, 1x0.55kW 2 feed speeds: 7 & 14 m/min Star-delta switch Planing thickness adjustable via hand crank Planing width 510 mm Knedpfxjv Up R As Ahvjd Leitz reversible knife cutterblock with 2 knives 2 table rollers Extraction port 140 mm

Stanje: novo, Leto izdelave: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle: Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg Knsdefpb Nmepfx Ahvod TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed spindle, tilting to one side, for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment, with zero point reset for height and offset travel Electronic position and speed displays 4 speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push-button for spindle start and stop Clockwise and counter-clockwise rotation Quick-release cutter clamping device Precision-planed grey cast iron table with rigid frame support Control panel mounted below on the rigid frame support Fence 216 with total adjustment via handwheel and LCD display, including cast fence plates and aluminium splitter plates Machine socket outlet Lockable main switch Mechanical motor brake Cutter guard and pressure device GAMMA V 1629 Curved fence 1639 Tapoa Spindle 30 mm, non-interchangeable CE compliant GS tested

Stanje: novo, SCM Olimpic 500 HT – Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 – Version "HP T-ER2" - "eye-S" control console (control panel) - Human-Machine Interface software (HMI) "Maestro active edge" - Fine milling and radius scraper unit, radius = 1 mm - Fine milling and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence - "SAVENERGY" kit Knodpfx Ahewkf Ihevjd - Interior lighting for the cabin and gluing area - "Nesting" tracing rollers - Separator agent spraying unit "AAR" 1 - Edge finishing spray device - Spray device for delicate edges - Jointing unit "RT-V1" - "EASY SIZE" device - Glue application unit "VC-VM" - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - End trimming unit "K-2 Radius" - Chamfer and radius milling unit "R-HP Multiedge 2R" - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit: 3 automatic settings straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Surface scraper "RC-N" - Buffing unit "SP-V" The machine is new and still in its original packaging. Special offer demonstration machine at a discounted price.