Avtomatski stroj za vrezovanje

WEINIG Univar 6 P

Number of spindles: 3 pcs.
Number of tool sets: 1.3/4.1 pcs.
Spindle diameter: 50, 40 mm
Spindle length: 120, 320, 125 mm
Weight: 2500 kg
Loading dimensions (L x W x H): 3800 x 1400 x 2000 mm
Table length: 3470 mm
Weinig Univar 6 P
For sale on behalf of client
-----
Operating voltage: 380 volts, 50 Hz.

For re-milling windows, doors, and similar items with asymmetrical continuous profiles.

Aggregate arrangement:
1. Climb-cut spindle on the right, pneumatically clocked.
2. Profiling spindle on the right
3. Fitting spindle

The profiling spindle is suitable for holding several tools stacked above each other. Spindle movement is pneumatic.

To achieve tear-free re-milling, spindle 1 works in climb-cut mode. For the last 100 mm of each frame end, this spindle plunges with the corresponding tool into the wood to avoid tear-out at the frame corners.

Machine body, tables, fences:
The machine body is made of heavy, torsion-free, and vibration-damping elements. Fences on the right in the profiling area are made of Pertinax. In front of the profiling spindle there is a split fence with sliding rail for short parts. Additional stop rail for large-format frames.

Feed system:
Continuous, chainless feed equipped with rubber rollers. Blowing system for cleaning feed rollers and table.

Spindles, hood:
Spindles feature high concentricity and are dynamically balanced. Extraction hoods are designed for optimal chip flow. Easiest tool changes thanks to quickly opened hood covers.

Machine operation, adjustment aids:
Operation from the front side. Adjustment of the fences to the tool diameter via mechanical digital display.

Electrical system, motors, control:
Electrical equipment according to DIN VDE 0113 - Electrical equipment of industrial machines EN 60204 IEC 204-1.
Other electrical regulations are not considered.

Motors dynamically balanced.

Lodpfjxpi Elex Abbjrg
Control of tool positions via selector switch from the control panel.

Tools:
Machine equipped with set-up tools, but without processing tools.

SPINDLE 1

Climb-cut spindle
Number of tools: 1
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Tool clamping length: 120 mm
Max. tool diameter (re-milling): 232 mm
Tool zero flight circle: 112-140 mm
Base position below table: 10 mm
Motor power: 4 kW (5.5 kW)

SPINDLE 2

Number of tools: 4
Spindle travel vertical: 3 x 80 mm = 4 tools
Optionally switchable to 2 x 95 mm = 3 tools
Spindle speed: 6000 rpm
Spindle diameter: 50 mm
Tool clamping length: 320 mm

Feed profiling unit: 8 m/min
Feed roller width: 50 mm/35 mm
Feed roller diameter: 95 mm
Fence height: 70 mm
Working width: min. 30 mm; max. 220 mm
Working height: min. 30 mm; max. 100 mm
Workpiece length without tenon: min. 245 mm

Max. tool diameter
With zero diameter 112 mm: 210 mm
With zero diameter 140 mm: 232 mm

Max. tool diameter (re-milling): 232 mm
Tool zero flight circle: 112-140 mm
Base position below table: 10/5 mm
Motor power: Spindle: 11 kW, Feed: 1.1 kW
Feed profiling unit: stepless 6-12 m/min
Feed roller width: 50 mm
Feed roller diameter: 95 mm
Fence height: 70 mm
Working width: min. 30 mm; max. 220 mm
Working height: min. 30 mm; max. 100 mm
Workpiece length without tenon: min. 245 mm

Special equipment:

3 mechanical spindle br...

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.