Okenski sistem

WEINIG Unicontrol 6

Stanje: rabljeno, Grooving spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 window production line ----- For sale on behalf of customer Manufacturer description: Designed for the production of individual parts, elements, and small series. Spindle arrangement: - One cross-cut saw Kodpfsw I Ea Dex Ah Donc - One single-sided tenoning and grooving spindle - One right-hand profiling spindle - One tenoning/grooving spindle and profiling spindle designed to hold multiple tools arranged vertically, with pneumatic spindle movement. Grooving table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit, manual height adjustment of the feed. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash outer dimensions. Control of tool positions (longitudinal and cross processing) via selector switch on the control panel. Technical Data ----- Cross-cut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor: 3 kW Tenoning and grooving spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 232 mm Motor: 11 kW Special equipment: Climb-cut spindle ----- Pneumatically cycled forward/backward for tear-free machining of window sashes, frames and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, minimum tool diameter: 112–140 mm, Max. tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for climb-cut spindle from 4 kW to 7.5 kW Screen control for 99 window types; 1 type can contain up to 8 different parts each with 2 end profiles and 2 longitudinal profiles. Production options: individual parts, double parts, by frame, by batch, milling around. Data input via keyboard with integrated operator guidance and fault diagnosis. 1 top-mounted grooving spindle ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Clamping length: 13 mm Total clamping length: 40 mm Axial positions: 2 Radial positions: 2 Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 to 3 kW 1 hardware milling unit, right: ----- For milling the hardware groove in the end milling pass or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool diameter range: min. 140 mm, max. 180 mm Home position below table level: 10 mm Hardware milling unit, custom version: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial positions: 2 Motor upgrade for hardware milling spindle from 2.2 to 3 kW Hardware milling spindle for 230 mm tool diameter in and above the table Electric height adjustment of the feed with selector switch on the control panel for 2 timber thicknesses, incl....

Stanje: rabljeno, Used control cabinet from a Weinig Unicontrol 6, suitable as a source for spare parts or for building a new control cabinet. Contents include, among others: Kodpfxjt Na Drs Ah Djnc - Brake unit by Hilger & Kern - Transformer Rathgeber Type ET 1000.

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 with GLS ----- For sale on behalf of customer Technical Data Overview ----- 1. Cross-cut saw ----- Cross-cut saw pneumatic, with 8-position revolver stop Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor power: 3 kW Laser alignment light for saw cut detection Manual length stop 4,100 mm 1. Tenoning and slotting spindle ----- Number of tools: 3 / 4 pcs Tool clamping length: 320 mm Vertical spindle stroke, pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Max. tool diameter: 320 mm Motor power: 11 kW 1. Profiling spindle – same direction spindle (climb & counter-climb) ----- Position: vertical right Number of tools: 1 pc. Tool clamping length: 120 mm Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool swing diameter: 232 mm Motor power: 7.5 kW 2. Profiling spindle ----- Position: vertical right Number of tools: 3 / 4 pcs Tool clamping length: 320 mm Vertical spindle stroke, pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool swing diameter: 232 mm Motor power: 11 kW Ksdpfx Ahew Im Hxe Dsnc 3. Profiling spindle (fitting spindle) ----- Position: vertical right Number of tools: 3 pcs Spindle speed: 6,000 rpm Spindle diameter: 40 mm Max. tool swing diameter: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing bar saw, horizontally and vertically indexed ----- Position: horizontal, top Number of tools: 1 pc. Tool clamping length: 40 mm Spindle diameter: 40 mm Motor power: 3 kW Axial indexing: 2 positions Radial indexing: 2 positions Additional Features ----- Sash rebating unit for tear-free rebating Twin workpiece package Return conveyor for single-operator handling at working height: swivel tray Screen control: 99 programs Tilting window device Electronic angle display for tilted windows INCLUDES window tooling OPPOLD, year 2013: Oppold IV 68/78/92 timber Oppold IV 68/78 timber-aluminium Sale of tools as currently equipped, as is, with existing accessories. Note on window profiles, tool drawings, and tool system lists: Engelfried GmbH does not warrant that the actual tools correspond with the specified and illustrated systems. (Technical details as per manufacturer – no guarantee!)

Stanje: rabljeno, Keyway Spindle 1 pc. Number of Milling Units: 5 pcs. Spindle Diameter: 50 mm Control System: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC Spindles Machine is cleaned and fully inspected prior to delivery Technical Data Summary (Please enquire about any additional included accessories) Pos. 1: Cross-Cut Saw ----- > Number of Tools: 1 pc. > Spindle Speed: 2,800 rpm > Spindle Diameter: 40 mm > Max. Tool Diameter: 400 mm > Motor Power: 3 kW > Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding > Laser Guidance for cutting section detection Pos. 2: Rounding Unit, Horizontal Lower ----- > Position: horizontal, lower > Motor Power: 1.5 kW > Spindle Diameter: 20 mm > Clamping Length: 25 mm > Spindle Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment mechanically linked with cross-cut saw > Radial Adjustment pneumatically controlled, on/off NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and Keyway Spindle ----- > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 3,500 rpm > Max. Cutting Circle: 320 mm > Spindle Diameter: 50 mm > Max. Tool Diameter: 320 mm > Motor Power: 11 kW Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling) ----- > Position: vertical, right > Number of Tools: 1 pc. > Tool Clamping Length: 120 mm > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical, right > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 11 kW 2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash Bar Guide consisting of: Guide rail at the stop (climb milling section), Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 6: Profiling Milling Unit, Horizontal Upper ----- > Clamping Length: 40 mm > Spindle Diameter: 40 mm > Motor Power: 3.0 kW > Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment: 30 mm, 8 positions > Radial Adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right Knodpfjvu Hghox Ah Dsc > Tool Clamping Length: 160 mm > Axial Adjustment: 115 mm, 8 positions > Radial Adjustment: 110 mm, 8-position turret > Spindle Speed: 5,850 rpm > Spindle Diameter: 40 mm > Max. Cutting Circle: 210 mm > Motor Power: 3.0 kW Pos. 8: Profile Milling/Grooving Unit, Bottom ----- > Motor Power: 3.0 kW > Tool Clamping Length: 125 mm > ...

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly inspected before delivery Technical Data Summary (For any additionally included accessories, please inquire) Pos. 1: Cross-cut saw ----- > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser line for identifying the saw cut > NC length stop, mounted on slotted table included Positioning of the cross-cut saw integrated into control system. > Length: 3500 mm Pos. 2: Tenon and slot spindle ----- > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb-cut and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm Knodpfjvu Hfqsx Ah Dsc > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide rail in the stop (area of climb-cut spindle), Sash support bar from above in the area of vertical right profile milling unit and profiling spindle. Pos. 5: Profile milling unit horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-capable > Rebate unit for tear-free rebating > Double-part package > Return conveyor for one-man operation: pivoting belt > Screen control > Tilt window device > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without machining tools No original pictures available yet. Photos show an identical machine from our archive. ----- Price for the above machine on request! ----- Optional at extra cost: EUR 6,500.00 Note...