Oblikovalni stroj

Weinig Powermat 2400 (7 spindle 50mm)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Weinig Powermat 2400 rezkar s 7 vreteni. (Leto 2015) Delovna višina: 10 - 160 mm . Delovna širina: 20 - 230 mm. 50 mm vretena, 6.000 obr/min (ni Powerlock) Spodaj 15 kW + zunanji ležaj Desno 11 kW + ravni rezkar Levo 11 kW + ravni rezkar Zgoraj 15 kW + ravni rezkar + zunanji ležaj Spodaj 18,5 kW + profilni rezkar Zgoraj 18,5 kW + ravni + profilni rezkar Spodaj 18,5 kW ravni rezkar + zunanji ležaj 11 kW pogonski motor, 60 m/min. Močna podajalna enota. 10x zgornji podajalni valji. Prvi zgornji podajalni valj s sklopko, primeren za avtomatizacijo. 5x spodnji podajalni valji. Avtomatski sistem mazanja. Elektronski digitalni spominski prikazovalni sistem. CNC POZICIONIRANJE NA VRETENIH 3, 5 & 8 Hnedpfx Aoyl Rmkjdren Možna dobava z vhodnim in izhodnim transporterjem Weinig.

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm Hedpfxjwvqklj Adrsnn • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: zelo dobro (rabljeno), Self-loading press for laminated boards Orma LS/ECO/CA 30/13 Hnodpfx Adov Nhx Usren Working length: 3000 mm Working width: 1300 mm Automatic material loading Glue application system Shelves heated with oil up to 130°C Upper pressing force: 57 t Side pressing force: 9 t Year of manufacture: 2001 CE certificate

Leto izdelave: 1990, stanje: delavnici obnovljeno (rabljeno), Weinig 4-sided planer with 7 heads, 7 universal, configuration: horizontal lower, vertical right, vertical left, vertical right, upper horizontal, lower horizontal, and the last universal. Drive is transmitted via cardan shafts. Drive secured with Rotax safety clutches. Workpiece is clamped pneumatically. Feed speed steplessly adjustable by inverter. Machine feed rate: 0-42 m/min. Motors: 2.5 kW and 7.5 kW. Table reground and new. Additionally, new wiring and new electrics installed. Machine after a complete overhaul. Warranty included. Hodpfx Aopqxnxjdrenn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Number of spindles: 4 pcs Working width: 230 mm Planing height: 160 mm Feed motor: 11 kW Feed speed: 60 m/min Control: Memory Plus Planer and moulder Weinig type Powermat 2400 for four-sided planing and profiling of wood, including infeed mechanisation Weinig High Mech E 1 and outfeed mechanisation with Sicko paternoster stacker. The machine is equipped with a Memory Plus system with electronic (radial) positioning of spindles 3 & 4 and MarathonPowerCoating PLUS on the table plates. Last service by manufacturer: December 2025. The plant is still in operation and can be inspected at any time. Expected availability: from September 2026. Spindle 1: Bottom / 15 kW / 50 mm / 6,000 rpm Hedpfx Adoyhfhnoronn Spindle 2: Right / 15 kW / 50 mm / 6,000 rpm Spindle 3: Left / 15 kW / 50 mm / 6,000 rpm Spindle 4: Top / 18.5 kW / 50 mm / 6,000 rpm

Stanje: delavnici obnovljeno (rabljeno), moč: 30 kW (40,79 KM), volumen zalogovnika: 800 l, delovna širina: 800 mm, Slow-speed shredder, Hnodpswzg Taefx Adren 800 x 1000 mm feed hopper 30 kW motor hydraulic pusher reversible knives

Stanje: zelo dobro (rabljeno), Štiristranska skobeljna Weinig Hydromat 23C Delovna širina: 230 mm Delovna višina: 160 mm Število vreten: 7 Razporeditev vreten: Hsdpfjxlcufjx Adronn 1. Spodaj 15 kW 2. Desno 7,5 kW 3. Levo 7,5 kW 4. Zgoraj 15 kW 5. Spodaj 30 kW (večlistna žaga) 6. Spodaj 7,5 kW (hidro podpora) 7. Zgoraj 7,5 kW (hidro podpora) Hitrost vrtenja vreten: 6000 o./min Premer vretena: 50 mm 4 pogonski valji v delovni mizi Hitrost pomika nastavljiva s frekvenčnikom do 36 m/min Pomik poganja kardanska gred Pnevmatski pritisni elementi Tehnična dokumentacija

Stanje: dober (rabljeno), Leto izdelave: 2009, Stroj za žlebljenje parketa ZEFIRO – avtomatsko izdelovanje žlebov na vezani strani parketnih desk. Uporabna dolžina 2400 mm. Vključen vstopni tračni transporter. Hnsdpfx Adjx Rrqvoren

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Weinig Powermat 700 6x 40 mm vreten. CNC na vretenih 3, 4 in 5. Širina: 20-230 mm Višina: 10-160 mm Sistemski spomin Avtomatski sistem mazanja za vodilne plošče. Št. 1: 11 kW – spodaj, 7000 obr./min Št. 2: 7,5 kW – desno, 7000 obr./min Št. 3: 7,5 kW – levo, 7000 obr./min Št. 4: 15 kW – zgoraj, 7000 obr./min Hnsdpfx Aeyub Nnsdrsn Št. 5: 11 kW – zgoraj, 7000 obr./min Št. 6: 11 kW – spodaj, 7000 obr./min Elektronsko nastavljiv podajalnik, 40 m/min Kratka dovajalna miza. Premaz Marathon za vodilne plošče ležišča stroja. Navodila za uporabo in ročno orodje.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Number of spindles: 5 pcs Working width: 250 mm Planing height: 160 mm Length of surfacing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Controller: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC MOULDER AND PLANER ----- AS NEW, DEMO MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4.5 up to 8,000 rpm - Width and height positioned by motor: left spindle radial upper spindle axial - Feed carriage positioned by motor - Additional motorised positioning: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Machining of workpieces depends on the following operating parameters: Material, wood moisture, tooling, cutting depth taken off, and feed speed. Adjustments to operating parameters may be required if necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to planing head Important: unit cannot be operated without jointing rabbet cutter Extraction nozzle D = 125 mm Tool clamping system: quick-change nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Hnodpswgwmnofx Adrsn Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter...