širokopasovni brusilni stroj

Vertongen S-320

Stanje: zelo dobro (rabljeno), Prehodna brusilka Vertongen S320 Delovna širina: 300 mm Delovna višina do 180 mm Kombinirana enota s čevljem Ročno dviganje in spuščanje delovne mize Dve hitrosti pomika: 7–14 m/min Glavni motor moči 5,5 kW Bwjdpfxsyg Dlcs Aiqju

Stanje: dober (rabljeno), Leto izdelave: 2004, Universal milling machine with HEIDENHAIN TNC 124 path control mechanical handwheels swivelling tilting table ±45° hydraulic tool clamping half-enclosure coolant tank manual Technical specifications: Bjdpfxeigm Tcs Aiqjwu X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed: 63 - 3,150 rpm Infinitely variable feed rate: 12-3000 / 6-1500 (Z) mm/min Quill stroke: 100 mm Head swivels: ±90° Spindle taper: ISO SK 40 Clamping area: 630 x 400 mm Total connected load: 8 kW Machine weight: approx. 2.2 t Space required: approx. 2 x 1.9 x 1.95 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, I am selling the following window manufacturing set: - 1 unit tenoning and slotting machine Weinig Unitec 10 - 1 unit profile and rebating center Weinig Univar 10 - Year of manufacture: 1998 - Cutter heads by OERTLI Available immediately. Bsdpfxefzzhyj Aiqowu Total price: €17,000. Condition: very good!

Stanje: dober (rabljeno), Surface grinding machine, grinding machine - Hydraulically operated horizontal surface grinding machine - Magnetic chuck: 300 x 150 mm - Grinding wheel motor: 1.1 kW, 2800 rpm - Water cooling system with filter - Grinding wheel diameter: 200 mm - Transport dimensions: 1470/1170/H1920 mm - Weight: 1090 kg Bsdped A Idxsfx Aiqowu

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2004, automatic fan baler after complete overhaul, automatic Bedpfolnanwsx Aiqswu

Stanje: rabljeno, Leitz HM - IV 66, komplet za okno z okvirjem in garnituro za vhodna vrata. Prodaja v trenutnem stanju, orodje ni bilo na novo nabrušeno. Prevzem na lokaciji prodajalca, Seevetal. Bjdpfshzgy Nex Aiqswu Brez transporta. Pridržana pravica do prodaje tretji osebi.

Stanje: nepreverjeno (rabljeno), Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for - precise surface geometry - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Bjdpfx Aist Tqy Eoqowu Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Wood guiding at the infeed area for hard, double-sided...

Stanje: novo, Segmented finger brake (press brake) with segmented upper clamping beam PNEUMATIC CYLINDER!!! Max. bending capacity across the entire working length ----- 1.5 mm Max. working length ----- 1500 mm Max. opening width ----- 48 mm Finger widths ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. bending angle ----- 0 - 135° Weight ----- 430 kg Bwodsga T Dlopfx Aiqsu Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, skupna masa: 950 kg, Dolžina brusilnega traku 2200 mm, širina brusilnega traku 400 mm, dolžina mize 1200 mm, uporabna višina 120 mm, širina brušenja 390 mm, hitrost brusilnega traku približno 21 m/s, pomične hitrosti 6 - 11 - 16 m/min, pogonski motor 7,5 kW, motor za podajanje 0,26 - 0,55 - 1 kW, pnevmatska oscilacija traku in izpihovanje traku, nosilec okvirja, podvozje. Bodpfx Aioxq Ehxeqswu

Leto izdelave: 2005, stanje: dober (rabljeno), TMG roller conveyor series, roller track 45 cm wide, available in various lengths, gravity or driven versions. Roller: 40 x 450 mm with bearing shaft. Track width: 500 mm plus side guide Length: 0.7–4 m Bodsgy Hapopfx Aiqjwu Side guide rail available on request Price per meter: Without drive: €150 With drive: €200