Agie nakup rabljenega (134)

Leto izdelave: 2005, stanje: generalkompletno obnovljen (rabljeno), AGIECUT Progress 3 Year of manufacture: 2005 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel distances: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra: 0.30 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Submerged machine with automatic wire threading and wire re-threading after breakage Maximum threadable height: 420 mm With manual front door (accessible from one side) Including AGIEJOGGER hand pendant for convenient setup AGIE IPG high-performance generator AGIEVISION control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg Dolhegzv Scscdw Ajkn The machine will be completely overhauled and thoroughly tested by us. You will receive a 6-month warranty on the machine. Commissioning and training can also be offered upon request.

Leto izdelave: 2008, stanje: generalkompletno obnovljen (rabljeno), AGIECUT Challenge V3 Year of manufacture: 2008 Travel ranges: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel ranges: +/- 70 mm Maximum taper angle: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading With automatic lowering tank (accessible from two sides) Dkjlsm Amf Dshcdw Aen Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D AGIEVISION 5 CNC control AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and extensively tested by us upon receipt of order. Incl. operator training at Techma on your overhauled machine Optionally available: transport, commissioning, training, chiller

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 256 mm, AGIECUT Progress VP2 Year of manufacture: 2011 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel paths: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (in water bath) / 450 kg (without water bath) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Incl. AGIEJOGGER handbox for convenient setup AGIE IPG-V generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Dkeljywkuyehcdw Aen Our machines are cleaned and completely overhauled upon receipt of your order. Afterwards, a test cut with the best surface quality is performed for acceptance purposes. You will receive a 6-month warranty on the machine. Commissioning and on-site training are available upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, AGIECUT Excellence 2F Leto izdelave: 2002 Pomiki (X/Y/Z): 350 x 250 x 256 mm Pomiki (U/V): +/- 70 mm Dkjlhcdezbbndow Ajn Maksimalna koničnost: 30° pri 100 mm Maksimalne dimenzije obdelovanca (dolžina/širina/višina): 750 x 550 x 250 mm Maksimalna teža obdelovanca (z/ brez kopeli): 200/450 kg Najboljša dosegljiva površina: 0,1 µm Ra Maks. hitrost rezanja pri cilindričnem rezu: 300 mm²/min Razpoložljivi premeri žice: 0,07 - 0,33 mm Vključuje AGIE univerzalni vpetilni okvir Vključuje AGIE JOGGER ročno škatlo Vključuje AGIE-Setup 3D Stroj naši tehniki po prejemu naročila očistijo, obnovijo in temeljito preizkusijo. Z veseljem vam ponudimo tudi zagon in usposabljanje.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, AGIECUT Excellence 3 Année de fabrication : 2001 Courses : X = 500 mm, Y = 350 mm, Z = 256 mm Déplacements axes U/V : +/- 70 mm Conicité maximale : 30° sur 100 mm de hauteur Dimensions maximales de la pièce : 1050 x 650 x 250 mm Poids maximal de la pièce : 400/800 kg Qualité de surface atteignable : Ra : 0,10 µm Diamètres de fil disponibles : 0,10 – 0,33 mm Delsyx D I Aohcdw Aekn Machine à bain d’eau avec enfilage automatique du fil Cuve à abaissement automatique (accès sur 2 côtés) Incl. boîtier manuel AGIEJOGGER pour un réglage confortable Incl. AGIESETUP 3D Commande AGIEVISION Générateur AGIE IPG Dimensions (L x l x h) : 2800 x 2400 x 2220 mm Poids net : 4500 kg La machine sera nettoyée, révisée et testée en profondeur par nos soins après réception de la commande. Incl. formation utilisateur chez Techma sur votre machine révisée Option : transport, mise en service, refroidisseur

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles Classic V3 Year of manufacture: 2008 Travel paths: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage Equipped with manual front door (accessible from one side) Including AGIEJOGGER handbox for easy setup AGIE IPG-V generator AGIEVISION 5 control system Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine has been cleaned, overhauled, and tested at our facility. We are happy to perform a customized test cut for you upon request. Dkeljv Hbygohcdw Aen A 6-month warranty on all machine parts is included. Commissioning and training can also be offered upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, AGIECUT Classic 2S Year of manufacture: 2001 Travels: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra: 0.30 µm Maximum cutting speed: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Djlev Dkvrehcdw Askn Submerged wire EDM with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled upon receipt of order. Afterwards, an acceptance test cut with optimal surface quality is performed. You will receive a 6-month warranty on the machine. Commissioning and on-site training can be offered upon request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 450 kg, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 256 mm, AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel ranges (X/Y/Z): 350 x 250 x 256 mm Travel ranges (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB port Deloxyxfpjhcdw Askn The machine will be cleaned, overhauled, and tested by us after receiving the order. We are also pleased to offer commissioning and training services.

Leto izdelave: 2006, stanje: generalkompletno obnovljen (rabljeno), AGIECUT Challenge 3 eCut Year of manufacture: 2006 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.2 µm Available wire diameters: 0.10 – 0.33 mm Submerged operation with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand-held box for convenient setup Including AGIESETUP 3D AGIEVISION control AGIE generator with eCut technologies for faster and more efficient machining Dkelhjgfm Rrscdw Aen Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg Upon receipt of order, the machine will be cleaned, overhauled, and thoroughly tested by us. We will then commission the machine at your facility. You will receive a 6-month warranty on the machine. We are also pleased to offer the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transport

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 256 mm, AGIECUT Progress V2 Dkolhcdwjx Uxglo Ajn Year of manufacture: 2007 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V axis travels: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.20 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG generator with power module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled upon receipt of order. Afterwards, a test cut is performed to verify the machine's best surface quality. You will receive a 6-month warranty on the machine. Commissioning and on-site training can be offered on request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 800 kg, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 256 mm, skupna dolžina: 1.050 mm, skupna širina: 650 mm, višina obdelovanca (maks.): 250 mm, AGIECUT Excellence 3 eCut Leto izdelave 2005 Pomiki osi: X = 500 mm, Y = 350 mm, Z = 256 mm Pomiki osi U/V: +/- 70 mm Maksimalna koničnost: 30° pri višini 100 mm Največje dimenzije obdelovanca: 1050 x 650 x 250 mm Največja teža obdelovanca: 400/800 kg Dosegljiva kakovost površine: Ra: 0,10 µm Na voljo so žične debeline: 0,10 – 0,33 mm Stroj z vodno kadjo in avtomatskim navijanjem žice Z avtomatsko spuščajočo posodo (dostopna z dveh strani) Vključuje AGIEJOGGER ročno enoto za udobno nastavljanje Vključuje AGIESETUP 3D Krmiljenje AGIEVISION AGIE IPG generator z eCut tehnologijo Dimenzije (dolžina x širina x višina): 2800 x 2400 x 2220 mm Neto teža: 4500 kg Po prejemu naročila stroj očistimo, obnovimo in temeljito preizkusimo. Vključno z uporabniškim usposabljanjem pri podjetju Techma na vašem obnovljenem stroju Po želji nudimo: - Prevoz - Zagon - Hladilno napravo Dkslhjyu Iq Escdw Asn - Vpenjalna sredstva

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 250 mm, pomik po osi Z: 250 mm, teža obdelovanca (maks.): 200 kg, poteza s peresom: 250 mm, AGIE Spirit 2 Letnik izdelave: 2005 Krmiljenje: APG FORM Pomiki: X=300 mm, Y=250 mm, Z=250 mm Maks. velikost obdelovanca: X=500 mm, Y=400 mm, Z=185 mm Maks. teža obdelovanca: 200 kg Maks. teža elektrode: 25 kg Razdalja med mizo in vpenjalom: 190 - 440 mm AGIE APG Spirit generator – delovni tok 80 amperov Najboljša dosegljiva obdelovalna površina Ra 0,2 µm Vključno s pnevmatskim vpenjalom Erowa ITS 50 ali 3R (po izbiri) Vključno s 4-postajnim menjalcem elektrod v magazinu Dolhcdwjxt N Hks Aokn Teža stroja (neto): 1280 kg Mere stroja (D x Š x V): 1850 x 2100 x 2360 mm Stroj bo po prejemu naročila očiščen, servisiran in preizkušen. Z veseljem vam pomagamo tudi pri zagonu stroja.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, AGIECUT Classic 2S Year of manufacture: 2006 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Doljuzvkgehcdw Ajkn Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Submerged machine with automatic wire threading and wire re-threading after breakage With manual front door (accessible from one side) Incl. AGIEJOGGER hand box for easy setup AGIE IPG generator AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and fully overhauled after receipt of order. A test cut with premium surface finish is performed for final acceptance. You receive a 6-month warranty on the machine. Commissioning and on-site training can be offered on request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 256 mm, AGIECUT Challenge V2 Year of manufacture: 2007 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER hand-held box Includes console with USB interface Dkolowqcm Uehcdw Ajn The machine will be cleaned, overhauled, and tested by us upon receipt of order. We are also happy to offer you commissioning and training services.

Stanje: rabljeno, Table length 400 mm Table width 300 mm Dkolhcovwgq Sjdw Aen X-axis travel 300 mm Y-axis travel 250 mm Z-axis travel 250 mm Machine weight approx. 1.2 t Space requirement approx. 2000 x 1200 x 2500 mm The machine is supplied with a very comprehensive range of accessories.

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 18.950 h, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, Premer žice: 0,1–0,3 mm Samodejno ponovno vdevanje Vodna kopel Obratovalne ure: 18.950 h Hodi osi: X 350 mm, Y 220 mm, Z 220 mm, U 350 mm, V 220 mm Krmiljenje Millenium Leto izdelave: 2005 Djlhcdewzyvhjw Askn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Pallet changer TOOLPAL 3 R, 12 positions Delhcor Hnglodw Ajkn

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 5.900 h, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, Wire diameter 0.1–0.3 mm Automatic re-threading Water bath Operating hours 5900 h Dkjlhcowzyr Aedw Asn Travel paths X 350 mm Y 220 mm Z 220 mm U 350 mm V 220 mm Year of manufacture 2008

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 2000 S drátová elektroerozivní řezačka (EDM stroj) – Rok výroby 2015 – Upínací systém EROWA Vysoce přesný CNC drátový elektroerozivní stroj GF AgieCharmilles ve velmi dobrém technickém stavu. Dkolhcdsy Udvfow Aen Výrobce: GF AgieCharmilles Model: CUT 2000 S Rok výroby: 2015 Pohyby os: Osa X: 350 mm Osa Y: 250 mm Osa Z: 256 mm Maximální rozměr obrobku: 750 × 550 × 250 mm Maximální hmotnost obrobku: 400 kg Provozní hodiny: Celkový provoz: 73 182 h Eroze: 16 508 h Technické údaje: Příkon: 3 x 400 V Hmotnost stroje: cca 3 500 kg Vybavení: • Automatické navlékání drátu • CNC řídicí systém GF AgieCharmilles • Kompletní upínací balíček EROWA v ceně • Více upínacích prvků a příslušenství EROWA • Přesné elektroerozivní přípravky a příslušenství (viz foto) Výhody: • Velmi spolehlivý stroj pro nástrojařství a výrobu přesných dílů • Vysoká přesnost řezu a vynikající povrchová kvalita • Moderní řídicí systém GF AgieCharmilles Stav: Stroj je v dobrém provozním stavu. Stroj je zapojen a lze ho na místě odzkoušet pod proudem. Místo: Česká republika Dostupnost: Ihned

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 426 mm, Premer žice (maks.): 0,3 mm, skupna masa: 3.900 kg, število osi: 5, premer žice (min.): 0,15 mm, This 5-axis wire EDM machine AGIE Classic 3s was manufactured in 2002. It features an X-axis travel of 500 mm, a Y-axis travel of 350 mm, and a Z-axis travel of 426 mm. The machine is equipped with a submerged head and comes with a chiller, resin filter, and wire feed/recovery system. If you are looking for a high-quality wire EDM machine, you should consider the AGIE Classic 3s we have for sale. Please contact us for further details. • U/V-axis travel: ±70 mm • Number of controlled axes: 5 (X, Y, Z, U, V) • Taper cutting: up to ±30° • Generator: MC 3S (Lista 030.844) • Axis drive (DA): DA MC 3S (Lista 030.834) • Electrical control cabinet: Classic 3S cabinet (Lista 027.254) • Supply voltage: 3×400 V / 50 Hz • Installed power: 9 kVA • Rated current: 14 A • Dielectric fluid: Deionized water • Head type: Submerged with wire guide nozzles • Motor for wire drive: +GF+ / Maxon Motor (Swiss made) • Wiring diagram: 628.992 Additional equipment Dkelhcdey Ulp Tew Aen • MTA chiller (included in sale) • Resin filter • Deionizer • Wire feed/recovery system

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 4.100 kg, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 250 mm, CNC krmiljenje brez hladilne naprave Tehnični podatki: Premik X / hod X: 350 mm Premik Y / hod Y: 250 mm Premik Z / hod Z: 250 mm Premik U / hod U: +-45 ° Premik V / hod V: +-45 ° maks. konusni rez: +-10 ° Maksimalne dimenzije obdelovanca: 820x680x250 mm Dimenzije mize: 700x480 mm maks. teža obdelovanca: 4100 kg Dkjlhcoy S Tp Aodw Ajn Približna teža: 2640 kg Tehnični podatki, dodatna oprema in opis stroja niso zavezujoči.

Stanje: rabljeno, Leto izdelave: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining type: Immersion Maximum workpiece size: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Distance floor – table: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U, and V Travels X, Y, Z: 550 x 350 x 400 mm Travels U, V: 550 x 350 mm Collision protection: axes X, Y, U, V, Z Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (option 0.1/0.2/0.3 mm) Wire guide type: closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) up to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) up to 5 kg (P5) Dielectric Paper filter: 2 cartridges Dielectric temperature: +/- 1°C Total ion exchange resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Dslhceza U Nljdw Askn Measuring system: glass scales Measuring resolution: 0.5 micron Servo motors: AC type All technical specifications are non-binding. Errors and omissions excepted. The machine was fully functional until dismantling. Warranty / guarantee is excluded.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Stroj za elektroerozijo z žico, tip Agiecut Classic 2s, leto izdelave 2004, naprodaj. Stroj je v dobrem stanju in deluje brezhibno. Ogled pod napetostjo je možen po dogovoru. Na voljo je tudi video posnetek. Tehnični podatki stroja: Agiecut Classic 2S • Proizvajalec: AGIE SA, CH-6616 Losone (Izdelano v Švici) Dkslhoy Snm Nocdw Ajn • Model / tip: AGIECUT CLASSIC 2S • Leto izdelave: 2004 (s CE-označbo) • Serijska številka (naprava): 663 • Št. seznama naprav: C32.102 • Št. električne sheme: 629.412 Električne priključne vrednosti & moč • Napetost: 3 x 400 V • Frekvenca: 50 Hz • Moč: 9 kVA • Nazivni tok: 14 A • Tok kratkega stika: 10K Teža & komponente • Skupna teža: 2580 kg • Podkomponente (serijske številke): o MC 2S CLASSIC (naprava): Serija 663 / Seznam naprav 002.354 o DA CLASSIC 2S: Serija 659 / Seznam naprav 033.804 o CABINET CLASSIC 2S (električna omara): Serija 665 / Seznam naprav 028.254 Nakladanje je možno po dogovoru preko nas. Za vprašanja smo vam z veseljem na voljo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 350 mm, pomik po osi Z: 500 mm, Sinker EDM Machine Agietron Hyperspark 3HS for sale in good condition. Fully functional and available for inspection under power. We are happy to provide you with a video of the machine. Dkjlhcdwsy Snl Eo Aon Includes all documentation and magnetic clamping plate. Loading by us is possible. Technical machine data: Agietron Hyperspark 3HS • Manufacturer: AGIE SA, CH-6616 Losone (Made in Switzerland) • Model / Type: AGIETRON HYPERSPARK 3 HS • Year of manufacture: 2006 (with CE marking) • Serial number (unit): 306 • System list no.: 592.031.206 • Circuit diagram no.: 500.753.322 Electrical connection values & performance • Voltage: 3 x 400 V • Frequency: 50 Hz • Power: 8.3 kVA • Rated current: 12 A • Short-circuit current: 10 kA • Control / version: CNC01D HS9 HYPERSPARK (Ident. version: 05.05.01) Weight & components • Total weight: 3800 kg • Subcomponents (serial numbers): o Hyperspark 3 (unit): serial 306 / device list 007.354 o ATH3 Hyperspark: serial 7 / device list 500.059.354 o Cabinet Hyperspark (control cabinet): serial 14 / device list 500.059.324 If you have any questions, please do not hesitate to contact us.

Stanje: rabljeno, Leto izdelave: 2004, Obdelovalna velikost 1.050 x 650 x 250 mm Dslhcdow Spa Nsw Aokn Maks. teža obdelovanca 400 (800) kg Krmiljenje Agievision AGIE Maks. koničnost 30° / 100mm Pomik - x 500 mm Pomik - y 350 mm Pomik - z 426 mm Pomik U x V-os mm Hitri pomik X-os 3 m/min Hitri pomik Y-os 3 m/min Hitri pomik U-os 0,6 m/min Hitri pomik V-os 0,6 m/min Hitri pomik Z-os 0,6 m/min Premer žice 0,2...0,33 mm Skupna potrebna moč 12,1 kVA Teža stroja ca. 3,9 t Prostorska zahtevnost ca. 2,8 x 2,4 x 2,3 m Žični erozijski stroj AGIE - Agiecut Progress 3