široki skobeljnik

V-HOLD lidermac reignmac VH-M 521

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Blsdpfxow Sy T He Afned Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: dober (rabljeno), Leto izdelave: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of manufacture: 1990 In good condition The SP700 series from Randek is a reliable saw designed for roof truss manufacturers and house builders worldwide. The SP700 saw is efficient, user-friendly, and precise. It has been on the market for a long time and is continuously improved in close cooperation with many customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you need. Thanks to the large blade diameter (700 mm), you can also cut multiple sections from timber stacks simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm; up to three boards can be cut per cycle - PLC-programmable saw - Clamping of the wood close to the cutting area for precise cuts Roller conveyor system with 5 adjustable pneumatic stops. Length: 6.25 m Outfeed roller conveyor: 4.10 m Complete line: 11.5 m Bsdpfx Aoh Ayyqefnold Technical information subject to correction.

Stanje: rabljeno, Four-sided planer REX, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles with 2 rotation speeds, electric table lifting device Bsdpfsrxf Smex Afnjld

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Blodpfx Aferigxysnod Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table Bedpfx Ajhlp D Njfnjld - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina mize: 300 mm, višina reza z zareznim rezilom (max.): 100 mm, dolžina vretena za rezkanje: 250 mm, Equipment: 1 GRECON feed transfer system with accumulation of 4 to 5 cleared laths of varying lengths for finger jointing 1 GRECON double-end finger jointing machine for deep notches (suitable for glued laminated timber beams) 1 180° transfer unit with two-component gluing system 1 GRECON finger jointing press Bsdjwz H Anjpfx Afnjld 1 CNC-controlled cross-cut saw 1 outfeed table

Stanje: rabljeno, Leto izdelave: 2004, WEINIG GRECON DOUBLE-END FINGER JOINT LINE MOD. PJ 150/500 - CE - USED - Infeed wood length: 150 - 700 mm Bodpfx Aewry I Eofnjld - Wood width: 40 - 150 mm - Wood thickness: 18 - 80 mm - Press length: 6100 mm - Pressing force: 120 kN - Milling motor: 15 kW - Scorer: 5.5 kW - Year: 2004 CE

Stanje: zelo dobro (rabljeno), Four-sided planer Weinig Unimat 23 EL Blsdpfxerb An Ue Afnjd Working width: 230 mm Working height: 160 mm Cutterhead configuration: Bottom: 5.5 kW Right: 4 kW Left: 5.5 kW Right: 4 kW Top: 11 kW Bottom: 5.5 kW Top: 7.5 kW Bottom: 7.5 kW Feed speed adjustable via variator: 6–36 m/min Feed powered by cardan shaft Feed rollers integrated in table Pneumatic pressure elements CE certificate Year of manufacture: 2003

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Fully automatic finger jointing line: Type Doppel-Pack with automatic infeed with multi-blade cross-cut saw with stacking unit Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Outfeed wood length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger joint execution vertical and horizontal Glue type: PVAC white glue, double-sided glue application Electrical data: Connection voltage: 400 V Control voltage: 24 V 50 Hz Bsdpfjg D Ugkex Afnold Plant completely wired up to the control cabinet. Finger length / possible wood cross-section and glue type can still be adapted Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Table width: 600 mm Glue application: double-sided application

Stanje: rabljeno, Leto izdelave: 1994, AUTOMATIC 5-SPINDLE MOULDER WEINIG MOD. PROFIMAT 23 – USED Configuration: - 1) Bottom horizontal spindle - 2) Right vertical spindle - 3) Left vertical spindle - 4) Top horizontal spindle - 5) Bottom horizontal spindle Bjdpfx Aform Rxwjneld Working width: 230 mm Year: 1994 Voltage: 380/50