široki skobeljnik

Steton 5-head four-sided planer. FAM /5

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim Bodjw Sy T Hspfx Afnjwi

Stanje: delavnici obnovljeno (rabljeno), Priključna moč 380V 13A, pogonski motor 5,5kW + podajalni motor 0,7kW, širina skobljanja 630 mm, gred Tersa s 4 noži, brezstopenjski podajalni pomik 6-18 m/min, stikalo zvezda-trikot, mehanska nastavitev višine mize s pomočjo ročne ročice – pogon preko nožne gredi, fino nastavljanje z ročnim kolesom, mehanski digitalni prikaz višine oblanja, 1x mizni valj, priključek za odsesavanje 160 mm, 1x jekleni podajalni valj, 1x jekleni izstopni valj. Bedpfjxdl U Eox Afnswi

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, višina skobljanja: 250 mm, delovna širina: 410 mm, skupna masa: 5.500 kg, Skobeljni stroj REX TIMBERWORK 410x250 mm + 4x posneti robovi + žagin vreteno Leto izdelave: 1998 Lokacija: Francija, Savoja Bwjdpfx Afowmm Alsnei

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, I am selling a vertical throughfeed CNC machining center Vitap Point K2 2.0. Year of manufacture: 2019 Configuration: - 1 pc. milling spindle 5.0 kW - 12 + 4 + 4 pcs. drilling spindles - 1 pc. grooving saw Return conveyor returns the workpieces either back to the operator or to the rear of the machine for throughfeed operation. Maximum workpiece size: x 1250 x 50 mm Minimum workpiece size: 270/400 x 185 x 4 mm Overall dimensions: 2900 x 1650 mm Total weight: 950 kg Comes with full documentation and CE certification. Bjdpfevx Dz Dsx Afnjwi Very good condition. Available immediately.

Stanje: novo, Leto izdelave: 2025, Kartonhülsenschneidemaschine für Toilettenpapierrollen Technische Daten • Kartonbahnbreite: 60 - 76 mm • Produktionsgeschwindigkeit: 35 - 40 m/min • Hülsendurchmesser (innen): 40 mm - 80 mm • Lagenanzahl: 2, 3, 4 Lagen (weitere auf Anfrage) • Schnittlänge: 600 - 2900 mm Bwsdoit N Rvopfx Afnei Ausstattung / Merkmale • Betrieb wahlweise mit Heiß- oder Kaltleim • Wechselbare Dornsysteme (für unterschiedliche Hülsengrößen) • Quetschschnitt durch zwei oder drei rotierende Messer mit synchronisierter Bewegung • Stufenlos regelbare Geschwindigkeit – elektronisch (Drehstrom/3-phasig)

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom Bwsdehuthyopfx Afnsi constant table height (consistent infeed height) maximum planing width: 600 mm maximum planing height: 280 mm planerheads with strip knives immediately ready for operation

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina mize: 300 mm, višina reza z zareznim rezilom (max.): 100 mm, dolžina vretena za rezkanje: 250 mm, Equipment: 1 GRECON feed transfer system with accumulation of 4 to 5 cleared laths of varying lengths for finger jointing Bwjdpjwz H Anefx Afnoi 1 GRECON double-end finger jointing machine for deep notches (suitable for glued laminated timber beams) 1 180° transfer unit with two-component gluing system 1 GRECON finger jointing press 1 CNC-controlled cross-cut saw 1 outfeed table

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Bodpsrigxyjfx Afnswi Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: novo, VKM supplies spare parts for VKM and Oswald’s complete product range, as well as selected Bezner-Oswald and Wema Probst machines, BÖGLI band saws, and replacement knives manufactured according to drawing specifications for various woodworking machines. Some parts are available directly from stock. Below, you’ll find a selection of our most frequently requested parts: Centering roller, 40 mm bore €112.00/each Centering roller, 50 mm bore €156.00/each Feed roller, 40 mm bore €118.00/each Feed roller, 50 mm bore €138.00/each Outfeed roller, 40 mm bore €102.00/each Feed roller, 50 mm bore €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 slide carriage RM7072W €302.00/each Oswald RM162 knife carrier RM7066W €215.00/each We are happy to provide a formal quotation including terms and conditions upon request. Additional spare parts available on inquiry. Bwodpfx Afjg Rn Avensi

Leto izdelave: 2006, Stanje: skoraj kot novo (rabljeno), Pneumatic setting and leveling device for band saws. Bodpfx Asdy A A Nsfnjwi