CNC stružnica

TRAUB TNC 65

Stanje: rabljeno, Leto izdelave: 2004, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX-8i, Description: Main Spindle: Kodpsxhbfnjfx Abbjwt Technology: Belt-driven spindle Speed: 4,000 rpm Power: 18.5 kW Torque: 230 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Sub Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 11 kW Torque: 210 Nm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Parts ejector: Hydraulic with flushing Travel in Z: 520 mm Rapid traverse in Z: 30 m/min Tool Turret I (X/Y/Z): Technology: 10-station turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z: 140/70/450 mm Rapid traverse in X/Y/Z: 15/6/30 m/min Tool Turret II (X/Z): Technology: 10-station turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Z: 140/450 mm Rapid traverse in X/Z: 15/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant system with paper band filter Raw material feed: Short bar loader, FMB SL80S Finished parts discharge: Hydraulic part gripper with conveyor belt Oil mist extraction: Electrostatic separator, LTA AC3001 Additional equipment: Various tool holders, flushing gun

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, potovalna razdalja osi X: 2.600 mm, pomik osi Y: 700 mm, pomik po osi Z: 700 mm, hitro pomikanje X-os: 40.000 m/min, hitri pomik os Y: 40.000 m/min, hitri pomik na osi Z: 40.000 m/min, širina mize: 750 mm, dolžina mize: 2.900 mm, obremenitev mize: 2.150 kg, 5-Axis Machining Centre DMG MORI - DMF 260-7 X-axis travel: 2600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm A-axis: 360000° B-axis: -110° to +110° Table length: 2900 mm Table width: 750 mm Table load capacity: 2150 kg Table diameter Ø: 750 mm Feed rate X-axis: 40,000 mm/min Feed rate Y-axis: 40,000 mm/min Feed rate Z-axis: 40,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 35 kW Kwjdpfx Abjxuqv Ajbst Spindle speed: 18,000 rpm Tool changer: 30 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant system: Yes Length: 8,400 mm Width: 3,423 mm Height: 2,620 mm Weight: 16,000 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith; however, accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details independently.

Stanje: dober (rabljeno), Leto izdelave: 2001, Ref. No.: 10551 Manufacturer: TRAUB Model: TNC 42/65 Year of manufacture: 2001 Control type: CNC Control system: TRAUB TX Stock location: Halberstadt Country of origin: Germany Machine No.: 93XXXXX Spindle speed: 8000 rpm X-axis stroke: 450 mm Turning length: 450 mm Spindle speeds: 4000 rpm Clamping diameter: 42 / 65 mm Spindle bore in front bearing: 110 mm Tool stations: 14 Max. torque: 170 / 230 Nm Rapid traverse (X-axis): 15 m/min Rapid traverse (Y-axis): 6 m/min Rapid traverse (Z-axis): 30 m/min Space requirement (LxWxH): 4354 x 2076 x 1917 mm Kjdpfx Abjx Sw Icobowt Turret slide cross-section, turning and milling support: 16 x 16 (20 x 20) mm Pressure: 70 bar Hydraulic tank: 70 l Total power requirement: 39 kVA Approx. machine weight: 5.2 t Feed force X-axis at 100% duty cycle: 5000 N Travel X-axis: 140 mm Travel Z-axis: 450 mm Travel Y-axis: 35 mm Ball screw (Z-axis, Ø x pitch): 32 x 10 mm Ball screw (X-axis, Ø x pitch): 32 x 5 mm Ball screw (Y-axis, Ø x pitch): 25 x 5 mm Additional Information: - Turret 1: 10 positions - Turret 2: 14 positions - Hecowpkfie Htlx Tfefh - Driven tools: Yes

Stanje: dober (rabljeno), Leto izdelave: 1996, CNC Turning Center TRAUB Type: TNC65 DG Year of manufacture: 1996 Control: TRAUB TX8F Includes extensive accessories. Kodeu Eug Iopfx Abbowt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, potovalna razdalja osi X: 560 mm, pomik osi Y: 560 mm, pomik po osi Z: 625 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 60 m/min, nazivna (navidezna) moč: 30 kVA, vrtilni moment: 163 Nm, obremenitev mize: 400 kg, premer vrtljive mize: 400 mm, največja hitrost vrtenja: 15.000 obr/min, dovod hladilne tekočine: 20 letvica, število vreten: 48, dolžina orodja: 300 mm, premer orodja: 70 mm, teža orodja: 10 g, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Technical specifications: CNC OSP P 200 Kwodpfxeuw Sq Uj Abbst Chip conveyor 48 tools Full-contour rotary table, 360,000 positions 15,000 RPM, BT 40 Coolant through spindle, 20 bar Table-mounted tool presetting Work area shower-type rinsing system Note: The machine has always operated with full oil (neat oil), processing Teflon material.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, skupna višina: 2.600 mm, skupna dolžina: 11.000 mm, skupna širina: 2.000 mm, skupna masa: 6.000 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX 8F, največja hitrost protivretena: 4.000 obr/min, število mest v zalogovniku orodij: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (Manufacturer: STAMAG) Kedowpa Ruopfx Abbowt - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection power: 54 kW - Power consumption: 39 kW - Noise emission at operator station: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Humidity: max. 70% - Workpiece discharge via the sub-spindle - Max. speed of sub-spindle: 4000 rpm - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input/output resolution: - X/Z: 0.001 mm - C-axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation time: 0.34 ms - Maximum thread pitch: 999.999 mm - Maximum radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Spindle speed override: 50…120% - Spindle speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-codes: 3 digits - B-codes: 6 digits - Memory capacity: 32,000 characters - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C-AXIS): Main spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 minutes Sub-spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 minutes TOOL TURRET 1 & 2: - Driven tools per turret: 10 (14) - Max. speed: 4000 (8000) rpm - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holders per turret: 10 (14) - Bore according to DIN 69880: Ø 30 x 55 (25 x 48) mm - Tool cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Indexing time per station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z-AXIS): - Max. speed: 4000 rpm - Max. clamping diameter: 65 mm - Steplessly programmable three-phase motor: 11 kW - Torque: 210 Nm - Thrust force at 100% duty cycle: 6000 N - Travel: 520 mm - Ball screw: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT SYSTEM: - Per tool turret: single-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTE: Due to sporadic use, operating hours may change slightly.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 18770, model krmilnika: TX 8F, premer vpenjanja: 65 mm, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid constitutes an obligation to collect the machine on time between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. counter spindle speed: 4,000 rpm Counter spindle power: 11 kW Counter spindle constant power range: 1:8 Counter spindle torque: 210 Nm Driven tool system Max. speed of driven tool: 4,000 rpm Driven tool power at 100% duty cycle: 1.5 kW Driven tool power at 15% duty cycle: 4 kW Driven tool torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool holder: ∅ 30 x 55 mm (25 x 48 mm) Tool shank cross-section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time per station: 0.6 s Indexing time over 5 stations: 1.5 s X/Z input and output resolution: 0.001 mm C-axis input and output resolution: 0.001° Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main and counter spindle C-axis): ± 3 minutes Kwjdpfexpgl Ajx Abbst Rapid traverse and path speed: 30,000 mm/min Rapid traverse: max. 15 m/min Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Speed override: 50 – 120% MACHINE DETAILS CNC Control: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated power current: 85 A Connection: 54 kW Power consumption: 39 kW Noise emission at operator position: 71 dB(A) Temperature range: 5 – 40 °C Max. humidity: 70% Hydraulic system pressure: 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M commands: 3 digits B commands: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-position tool turrets with powered tool stations HAINBUCH chuck system Counter spindle Bar loader from STAMAG Chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Rolldruck Stufenlos regelbar von 240 kN Vorschub - Feinverstellung 0,5-45 mm/min Drehzahl 0-80 U/min Schwenkwinkel der Rollköpfe 11 ° Durchmesser der Rollspindeln 69,85 mm Hub - Rollspindelschlitten 0-150 mm min. Abstand - Rollspindeln 138 mm max. Abstand - Rollspindeln 285 mm Kwedpexukrqjfx Abbet min. Durchmesser - Rollwerkzeuge 230 mm max. Durchmesser - Rollwerkzeuge 135 mm kleinster Durchmesser 2 mm größter Durchmesser 55 mm Gewindelänge im Einstechverfahren 200 mm Gewindelänge im Durchlaufverfahren 2000 mm größte Steigung d. Gewindes 4 mm Gesamtleistungsbedarf 14 kW Maschinengewicht ca. 2,4 t Raumbedarf ca. 2,0 x 2,5 x 1,9 m Rollzeit stufenlos einstellbar von: 0,1s Pausenzeit stufenlos einstellbar von: 0,1s Aufnahmelänge der Rollspindeln: 200mm Maschinenbetthöhe: 810mm Rollspindelhöhe über Maschinenbett: 200mm Höhe der Stützlager: 115mm Größte Teilung bei Kerbverzahnung: 2,5mm -(bis 70kg/mm2 Festigkeit d. Werkstoffes)

Stanje: rabljeno, Leto izdelave: 1996, maks. premer palice 65 mm maks. premer vrtenja 175 mm maks. dolžina palice 3.000 mm Kwedpfjxbtq Nsx Abbst krmiljenje sistem TX 8F pomik – x 140 mm pomik – z 520 mm CNC stružnica | TRAUB - TNC 42/65 DG, opremljena s podajalnikom palic. Stroj je v vzdrževanem stanju in si ga je mogoče kadarkoli ogledati pod priklopljenim tokom. Videoposnetke stroja na lokaciji vam na zahtevo z veseljem posredujemo. Tehnični podatki stroja sledijo v kratkem. Prosimo za vaše razumevanje! #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 38.433 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 489, Premer palice (maks.): 65 mm, model krmilnika: TRAUB TX8F, dolžina letve: 3.000 mm, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC avtomatski stružni stroj s sedmimi osmi ter glavno in proti-vreteno! TEHNIČNI PODATKI Osi in vretena Število osi: 7 Glavno vreteno: prisotno Proti-vreteno: prisotno Število revolverskih glav: 2 C-os: 2 Y-os: 1 Krmiljenje: TRAUB TX8F PODATKI O STROJU Delovne ure: 38.433 ur Kwodpfxew Uiktj Abbet OPREMA Polnilnik palic Stamag DN61 (premer palice 65 mm, dolžina palice 3 m) Hladilni sistem Izmet delov Transportni trak za odrezke Zračni filter

Stanje: dober (rabljeno), Leto izdelave: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Spindle speed, main spindle: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max. diameter, sub-spindle: 12 mm Sub-spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Includes (not an exhaustive list): Kwodpfx Aet E Dbysbbjt - Traub TNL 12/7 CNC lathe - Meyrat high-frequency spindles, 2 units - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Exact scope of supply as per photo documentation. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Leto izdelave: 1996, Stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Kjdpfov Scrhsx Abbswt

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Traub CNC Turning Machine TNC65DGY, TX8I, year 2005, serial no. 1130 Kwedpfjwi I Eyex Abbet Description: Y-axis on S1, V-axis, 2x C-axis, 2x driven tool stations, 2 turrets VDI30, Hainbuch BZI65 clamping system on main and counter spindle, parts catcher, Iemca Master 880MP-E bar feeder. Condition: Very well maintained, good condition, serviced. Machine geometry checked and corrected/adjusted. The machine can be inspected under power – or video available. Warranty: 6 months on main components as follows: Spindle bearings, ball screws, linear guides, clamping cylinders. The warranty expressly covers only the spare parts, not downtime hours, labor time, or travel time. The warranty expressly does not cover parts other than those listed above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Rabljeni veliki formatni CNC revolverski stroj za izsekovanje Trumpf 500R s 1600 mm grlom naprodaj TRUMPF TRUMATIC T500R, veliki formatni CNC rotacijski izsekovalni stroj naprodaj Stroj omogoča obdelavo pločevine do velikosti 3 m x 1,5 m brez ponovnega pozicioniranja. Specifikacija Trumpf UK: Znamka: TRUMPF Model: TRUMATIC 500R Tip: CNC stroj za izsekovanje Krmilje: Bosch CC220 Izsekovalna sila (tona): 22 Primeren za uporabo multi-tool glave Trumpf TC 500R revolverski izsekovalni stroj, format 3000 x 1500 mm, velik format 1600 mm grlo x 3-metrska vodila Ksdpfx Astltl Hsbbswt TRUMPF TRUMATIC 500 CNC izsekovalni stroj s krmiljem in zračno mizo Kapaciteta: 220 kN Letnik: 1999

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Kwsdpfjv Scrbsx Abbot