CNC center za struženje in rezkanje

Traub TNC65

Stanje: dober (rabljeno), Leto izdelave: 2001, Ref. No.: 10551 Manufacturer: TRAUB Model: TNC 42/65 Year of manufacture: 2001 Control type: CNC Control system: TRAUB TX Stock location: Halberstadt Country of origin: Germany Machine No.: 93XXXXX Spindle speed: 8000 rpm X-axis stroke: 450 mm Turning length: 450 mm Spindle speeds: 4000 rpm Clamping diameter: 42 / 65 mm Spindle bore in front bearing: 110 mm Nwsdpfx Adsxxpbrspep Tool stations: 14 Max. torque: 170 / 230 Nm Rapid traverse (X-axis): 15 m/min Rapid traverse (Y-axis): 6 m/min Rapid traverse (Z-axis): 30 m/min Space requirement (LxWxH): 4354 x 2076 x 1917 mm Turret slide cross-section, turning and milling support: 16 x 16 (20 x 20) mm Pressure: 70 bar Hydraulic tank: 70 l Total power requirement: 39 kVA Approx. machine weight: 5.2 t Feed force X-axis at 100% duty cycle: 5000 N Travel X-axis: 140 mm Travel Z-axis: 450 mm Travel Y-axis: 35 mm Ball screw (Z-axis, Ø x pitch): 32 x 10 mm Ball screw (X-axis, Ø x pitch): 32 x 5 mm Ball screw (Y-axis, Ø x pitch): 25 x 5 mm Additional Information: - Turret 1: 10 positions - Turret 2: 14 positions - Hecowpkfie Htlx Tfefh - Driven tools: Yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, hitro pomikanje X-os: 15 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, skupna višina: 2.600 mm, skupna dolžina: 11.000 mm, skupna širina: 2.000 mm, skupna masa: 6.000 kg, proizvajalec krmilnikov: TRAUB, model krmilnika: TX 8F, največja hitrost protivretena: 4.000 obr/min, število mest v zalogovniku orodij: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (Manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection power: 54 kW - Power consumption: 39 kW - Noise emission at operator station: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Humidity: max. 70% - Workpiece discharge via the sub-spindle - Max. speed of sub-spindle: 4000 rpm - Max. workpiece diameter: 56 mm Nsdpfswpa Rujx Adpjwp - Programming: EIA and ISO code Input/output resolution: - X/Z: 0.001 mm - C-axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation time: 0.34 ms - Maximum thread pitch: 999.999 mm - Maximum radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Spindle speed override: 50…120% - Spindle speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-codes: 3 digits - B-codes: 6 digits - Memory capacity: 32,000 characters - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C-AXIS): Main spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 minutes Sub-spindle: - Max. speed: 80 rpm - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 minutes TOOL TURRET 1 & 2: - Driven tools per turret: 10 (14) - Max. speed: 4000 (8000) rpm - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holders per turret: 10 (14) - Bore according to DIN 69880: Ø 30 x 55 (25 x 48) mm - Tool cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Indexing time per station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z-AXIS): - Max. speed: 4000 rpm - Max. clamping diameter: 65 mm - Steplessly programmable three-phase motor: 11 kW - Torque: 210 Nm - Thrust force at 100% duty cycle: 6000 N - Travel: 520 mm - Ball screw: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT SYSTEM: - Per tool turret: single-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTE: Due to sporadic use, operating hours may change slightly.

Stanje: rabljeno, Leto izdelave: 2003, maks. premer palice 65 mm maks. dolžina palice 3.000 mm krmiljenje sistem TX 8H CNC stružnica | TRAUB - TNC 65 z vgrajenim podajalnikom palic. Stroj je v dobro vzdrževanem stanju in ga je mogoče kadar koli ogledati pod napetostjo. Nwsdpfx Adsxbtp Espop Videoposnetke stroja na lokaciji tovarne z veseljem posredujemo na zahtevo. Tehnični podatki stroja bodo sledili v kratkem. Zahvaljujemo se vam za razumevanje! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65

Stanje: rabljeno, Leto izdelave: 2004, proizvajalec krmilnikov: Mitsubishi, model krmilnika: TX-8i, Description: Main Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 18.5 kW Torque: 230 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Sub Spindle: Technology: Belt-driven spindle Speed: 4,000 rpm Power: 11 kW Torque: 210 Nm Workpiece clamping: Collet chuck, Hainbuch Spanntop size 65 Parts ejector: Hydraulic with flushing Travel in Z: 520 mm Rapid traverse in Z: 30 m/min Tool Turret I (X/Y/Z): Technology: 10-station turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z: 140/70/450 mm Rapid traverse in X/Y/Z: 15/6/30 m/min Tool Turret II (X/Z): Technology: 10-station turret Tool holder: VDI30 Driven tools: 4,000 rpm, 4 kW, 16 Nm Travel in X/Z: 140/450 mm Nsdpfx Adoxhbfnspjwp Rapid traverse in X/Z: 15/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: Coolant system with paper band filter Raw material feed: Short bar loader, FMB SL80S Finished parts discharge: Hydraulic part gripper with conveyor belt Oil mist extraction: Electrostatic separator, LTA AC3001 Additional equipment: Various tool holders, flushing gun

Leto izdelave: 1996, Stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Nsdpfx Asv Scrhjdpswp

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Traub CNC Lathe TNC65DGY, TX8H, Year 2001 • 2x 10-position turrets with live tooling drive VDI30 • C-axis on main and sub spindle Nedpfxswi Izhs Adpjwp • Y-axis on turret 1 • Hainbuch BZI65 on main/sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts catalogue, circuit diagram, ATC optics Very good condition. Machine can be inspected under power. Machine geometry has been checked and corrected/set.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 38.433 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 489, Premer palice (maks.): 65 mm, model krmilnika: TRAUB TX8F, dolžina letve: 3.000 mm, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC avtomatski stružni stroj s sedmimi osmi ter glavno in proti-vreteno! TEHNIČNI PODATKI Osi in vretena Število osi: 7 Glavno vreteno: prisotno Proti-vreteno: prisotno Število revolverskih glav: 2 C-os: 2 Y-os: 1 Krmiljenje: TRAUB TX8F PODATKI O STROJU Nwedpfx Adjw Uiktepsp Delovne ure: 38.433 ur OPREMA Polnilnik palic Stamag DN61 (premer palice 65 mm, dolžina palice 3 m) Hladilni sistem Izmet delov Transportni trak za odrezke Zračni filter

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 18770, model krmilnika: TX 8F, premer vpenjanja: 65 mm, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid constitutes an obligation to collect the machine on time between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Max. workpiece diameter: 56 mm Max. clamping diameter: 65 mm Max. counter spindle speed: 4,000 rpm Counter spindle power: 11 kW Counter spindle constant power range: 1:8 Counter spindle torque: 210 Nm Driven tool system Max. speed of driven tool: 4,000 rpm Driven tool power at 100% duty cycle: 1.5 kW Driven tool power at 15% duty cycle: 4 kW Driven tool torque at 15% duty cycle: 12.4 Nm (4 Nm) Number of tool stations: 10 (14) Cylindrical tool holder: ∅ 30 x 55 mm (25 x 48 mm) Tool shank cross-section: 20 x 20 mm (16 x 16 mm) Chip-to-chip time: 1.2 s Indexing time per station: 0.6 s Indexing time over 5 stations: 1.5 s X/Z input and output resolution: 0.001 mm C-axis input and output resolution: 0.001° Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Max. speed (C-axis): 80 rpm Torque (main spindle C-axis) at 100% duty cycle: 100 Nm Accuracy (main and counter spindle C-axis): ± 3 minutes Rapid traverse and path speed: 30,000 mm/min Rapid traverse: max. 15 m/min Feed force at 100% duty cycle: 6,000 N Nwodpfxexpgl Ae Adpjp Feed travel: 520 mm Ball screw drive (∅ x pitch): 32 x 10 mm Feed override: 0 – 200% Rapid traverse override: 0 – 100% Speed override: 50 – 120% MACHINE DETAILS CNC Control: TX 8F Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated power current: 85 A Connection: 54 kW Power consumption: 39 kW Noise emission at operator position: 71 dB(A) Temperature range: 5 – 40 °C Max. humidity: 70% Hydraulic system pressure: 60 bar Hydraulic tank capacity: 150 l Coolant pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Input Speed input: 5 digits Cutting speed input: 4 digits Tool input: 4 digits Program number: 8 digits Subprogram number: 8 digits Block number: 4 digits M commands: 3 digits B commands: 6 digits Memory capacity: 32,000 characters Operating hours: 46,282 h (as of 17.10.2025) EQUIPMENT Two 10-position tool turrets with powered tool stations HAINBUCH chuck system Counter spindle Bar loader from STAMAG Chip conveyor

Stanje: rabljeno, Leto izdelave: 1996, maks. premer palice 65 mm maks. premer vrtenja 175 mm maks. dolžina palice 3.000 mm krmiljenje sistem TX 8F pomik – x 140 mm pomik – z 520 mm CNC stružnica | TRAUB - TNC 42/65 DG, opremljena s podajalnikom palic. Stroj je v vzdrževanem stanju in si ga je mogoče kadarkoli ogledati pod priklopljenim tokom. Nwjdoxbtq Nepfx Adpop Videoposnetke stroja na lokaciji vam na zahtevo z veseljem posredujemo. Tehnični podatki stroja sledijo v kratkem. Prosimo za vaše razumevanje! #Tags: TNC65 | TNC-65 |TNC 42-65 DG | TNC 42/65DG

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Nwedpfev Scrbex Adpep