CNC center za struženje in rezkanje

TRAUB TNC 65 DGY

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: popolnoma funkcionalen, model krmilnika: TX 8F, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, Oprema: podajalnik palic, transportni trak za ostružke, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are committing to collecting the machine within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Maximum counter-spindle speed: 4,000 rpm Maximum workpiece diameter: 56 mm Rapid traverse: up to 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece discharge via counter-spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 minutes Counter-spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 minutes Tool Turrets 1 & 2 Driven tools per turret: 10 (14) Maximum speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Tool holder bays/turret: 10 (14) Cylindrical shank according to DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time (as per VDI 2852): 1.2 s Station change time: 0.6 s Across 5 stations: 1.5 s Counter-spindle (numerically controlled in Z-direction) Maximum speed: 4,000 rpm Maximum clamping diameter: 65 mm Continuously programmable three-phase motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Fpjdpfx Adsym A E Isvod Frequency: 50 Hz Control voltage: 230 V Nominal pressure current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator’s position: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant/Lubrication Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read-off operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chuck system Two 10-position tool turrets with driven tool stations Counter-spindle External reference: L. Schaible

Stanje: dober (rabljeno), The driven tools listed here, VDI 50, are designed for a tool turret manufactured by SAUTER. They are in good condition and fully functional, previously used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight type, manufacturers NACKE + WTO, VDI 50 for SAUTER tool turret: Article No.: XVI 24275 1 drilling and milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT Article No.: XVI 24277 1 drilling and milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Fsdobql S Hjpfx Advopd Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Fodpfxev Scrhe Advopd

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Fpodpfx Adjv Scrbevod

Stanje: rabljeno, Leto izdelave: 2013, premer struženja nad ležiščem sani: 435 mm, premer struženja nad zgornjim sanežem: 245 mm, višina središča: 210 mm, širina na sredini: 1.500 mm, skupna masa: 1.700 kg, Technical Data Make: Weiler Model: DA 210 AC x 1500 Year of manufacture: 2013 Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Centre height: 210 mm Centre distance: 1500 mm Spindle bore: 52 mm Fjdpfx Adoykakpevopd Speed range: 20 – 2,500 rpm, stepless Drive power: 10.5 kW Dimensions: approx. L 2.2 x W 1.0 x H 1.7 m Weight: 1.7 t Equipment • Stepless speed control • HEIDENHAIN digital readout (3 axes) • 3-jaw and 4-jaw chucks, Röhm Duro brand • Multifix toolpost + 10 inserts • Fahrion collet chuck + approx. 33 collets • Fixed and travelling steadies • Various centre points + drill chuck • Coolant system • Documentation HEIDENHAIN ND 780 Numerical Position Display: • 3-axis display for bed, cross, and top slides • Tool memory for 16 tools, with one reference point per axis • Summation key for Z and Zo • Inch/metric switchable • Cross-slide X travel displayed as radius or diameter • Delta key for 'distance-to-zero' display • Display resolution up to 1 µm • 'Freeze' function for actual position • Taper calculator All information without guarantee. A powered demonstration is always possible in our showroom.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Traub CNC Lathe TNC65DGY, TX8H, Year 2001 • 2x 10-position turrets with live tooling drive VDI30 Fodewi Izhopfx Advspd • C-axis on main and sub spindle • Y-axis on turret 1 • Hainbuch BZI65 on main/sub spindle Hollow clamping cylinder • Chip conveyor, coolant tank • Spare parts catalogue, circuit diagram, ATC optics Very good condition. Machine can be inspected under power. Machine geometry has been checked and corrected/set.

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A CNC twin-spindle turning and milling center by Gildemeister, including coolant system and chip conveyor, is available. Swing diameter over bed: 640 mm, machining diameter: 400 mm, center distance: 1930 mm, X/Z travel: 550 mm/1585 mm, Y-axis travel: +/-110 mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36 kW/45 kW, speed: 4000 rpm, torque: 600 Nm-730 Nm, bore: 107 mm. Milling spindle: speed: 12000 rpm, power: 13.2 kW/22 kW, torque: 100 Nm. Tool positions: 60, turret: 12-station star turret SW 380. Machine dimensions X/Y/Z: approx. 9300 mm/4600 mm/3100 mm, weight: approx. 20,000 kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection possible. Fedpfjwmdv Ajx Advjpd

Leto izdelave: 1999, stanje: rabljeno, Pribor za stružnico: da Pogonski držalo za orodje VDI 20 Količina: 3 kosi v paketu Fpjdpfx Adshr Sv Tsvjd +++++ Prosimo, upoštevajte, da je stroj razstavljen in pripravljen za nakladanje. Zaradi tega ni možen prikaz stroja pod napetostjo ali izdelava videoposnetka. Naš oglas vsebuje najbolj informativne fotografije v najboljši možni kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++

Stanje: rabljeno, Details on request. Fsdedbmyzopfx Advopd

Stanje: rabljeno, številka stroja/vozila: 1 284 066, Chuck diameter: 200 mm Through hole: 50 mm Mount, short taper according to DIN 55027: Size 6 External diameter of clamping cylinder: 290 mm Overall height (clamping cylinder to front of chuck without jaws): 150 mm Fjdecm Tgkepfx Advspd Pneumatically actuated