CNC stružno-rezkalni center

Traub TNC65 DGY

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: popolnoma funkcionalen, model krmilnika: TX 8F, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, Oprema: podajalnik palic, transportni trak za ostružke, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are committing to collecting the machine within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Maximum counter-spindle speed: 4,000 rpm Maximum workpiece diameter: 56 mm Rapid traverse: up to 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece discharge via counter-spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 minutes Counter-spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 minutes Tool Turrets 1 & 2 Driven tools per turret: 10 (14) Maximum speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Tool holder bays/turret: 10 (14) Cylindrical shank according to DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time (as per VDI 2852): 1.2 s Station change time: 0.6 s Across 5 stations: 1.5 s Counter-spindle (numerically controlled in Z-direction) Maximum speed: 4,000 rpm Maximum clamping diameter: 65 mm Continuously programmable three-phase motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Nominal pressure current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator’s position: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Ihsdpfx Adeym A E Iskjw Coolant/Lubrication Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read-off operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chuck system Two 10-position tool turrets with driven tool stations Counter-spindle External reference: L. Schaible

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Iodev Scrhepfx Adkjhw

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Iedpov Scrbofx Adkohw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 38.433 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 489, Premer palice (maks.): 65 mm, model krmilnika: TRAUB TX8F, dolžina letve: 3.000 mm, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC avtomatski stružni stroj s sedmimi osmi ter glavno in proti-vreteno! TEHNIČNI PODATKI Osi in vretena Število osi: 7 Glavno vreteno: prisotno Proti-vreteno: prisotno Število revolverskih glav: 2 C-os: 2 Y-os: 1 Krmiljenje: TRAUB TX8F PODATKI O STROJU Delovne ure: 38.433 ur Ijdpfow Uiktsx Adkshw OPREMA Polnilnik palic Stamag DN61 (premer palice 65 mm, dolžina palice 3 m) Hladilni sistem Izmet delov Transportni trak za odrezke Zračni filter