CNC center za struženje in rezkanje

Traub TNC65DGY

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 46.282 h, Funkcionalnost: popolnoma funkcionalen, model krmilnika: TX 8F, največja hitrost protivretena: 4.000 obr/min, premer obdelovanca (maks.): 56 mm, Oprema: podajalnik palic, transportni trak za ostružke, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are committing to collecting the machine within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Maximum counter-spindle speed: 4,000 rpm Maximum workpiece diameter: 56 mm Rapid traverse: up to 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece discharge via counter-spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 minutes Counter-spindle: Maximum speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 minutes Tool Turrets 1 & 2 Driven tools per turret: 10 (14) Maximum speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Tool holder bays/turret: 10 (14) Cylindrical shank according to DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time (as per VDI 2852): 1.2 s Station change time: 0.6 s Across 5 stations: 1.5 s Counter-spindle (numerically controlled in Z-direction) Maximum speed: 4,000 rpm Maximum clamping diameter: 65 mm Continuously programmable three-phase motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw drive: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Godpfoym A E Iox Agyebi Nominal pressure current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator’s position: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant/Lubrication Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read-off operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chuck system Two 10-position tool turrets with driven tool stations Counter-spindle External reference: L. Schaible

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, obratovalne ure: 11.500 h, številka stroja/vozila: 3098, laserske ure: 6.900 h, laserska moč: 10.000 W, najv. debelina pločevine: 30 mm, najv. debelina jeklene pločevine: 30 mm, moč: 10 kW (13,60 KM), leto zadnje generalne obnove: 2024, delovno območje: 4.020 mm, Oprema: dokumentacija / priročnik, hladilna enota, varnostna svetlobna zapora, MSF Pro 4001.20LB MicroStep CNC Cutting System of the MSF Pro series featuring: • 2D laser cutting head with IPG YLS 10000 U fiber laser source • Fully automatic shuttle table • Fully automatic drilling spindle HSK 63 • High-performance Donaldson DFPRO 6 filtration system with 7.5 kW Technical Data: Machine designation: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guides: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Traverse speed: up to 100,000 mm/min Gbsdpfxjvw Tdls Agyoi Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Z-axis acceleration: 0.75 G Positioning accuracy (Pa*): 0.07 mm as per VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm as per VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Laser cutting head EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical Data: Drilling range: Ø 4 mm - Ø 30 mm Tapping range: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Speed: up to 10,000 rpm Tool cooling: internal cooling Tool changer: automatic Automatic measurement of drilling tools Pneumatic hold-down device Brush for removal of drilling chips Donaldson® filter system DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Airflow rate: 4,500 m³/h Asper Nesting® | Automatic nesting software With Witt gas mixer Machine has always been operated with maintenance and support contract

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Gbedpfsv Scrhox Agyoi

Leto izdelave: 2015, stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Gbjdsv Scrbjpfx Agyei

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Machining Center Rover 20 Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills plus grooving saw, 6-position tool changer. The NC410 control system features a floppy disk drive, color screen, and very simple, graphically assisted programming options. Additionally, the Rover 20 already enables pendulum (dual-zone) machining. Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Gbjdslc Dwnopfx Agyoi Control cabinet: 950 x 700 x 1,300 mm Ex site

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, obratovalne ure: 38.433 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 489, Premer palice (maks.): 65 mm, model krmilnika: TRAUB TX8F, dolžina letve: 3.000 mm, število osi: 7, Oprema: podajalnik palic, transportni trak za ostružke, CNC avtomatski stružni stroj s sedmimi osmi ter glavno in proti-vreteno! TEHNIČNI PODATKI Osi in vretena Število osi: 7 Glavno vreteno: prisotno Proti-vreteno: prisotno Število revolverskih glav: 2 C-os: 2 Y-os: 1 Krmiljenje: TRAUB TX8F PODATKI O STROJU Delovne ure: 38.433 ur OPREMA Polnilnik palic Stamag DN61 (premer palice 65 mm, dolžina palice 3 m) Hladilni sistem Izmet delov Gjdpfow Uiktsx Agyjbi Transportni trak za odrezke Zračni filter

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, X-os 1.500 mm Y-os 660 mm Z-os 600 mm Gbsdpfxexm Tufo Agyji Dimenzija mize 1.680 x 660 mm Vretenova hitrost 12.000 obr/min Vpenjalo orodja SK40 Menjalnik orodij 24 pozicij Krmiljenje ULTIMAX 4 Vključuje 4. os Kitagawa MR 200 (rotacijska os + konjiček) Vključuje transporter za ostružke Vključuje notranje hlajenje skozi vreteno (IKZ)

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machinable length: 210 mm - Spindle speed: 200 – 10,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 200 – 12,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 3 FRONT TOOL STATION - Number of positions: 8 BACKWORKING - Number of positions: 4 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Total connected load: 11 kVA WEIGHT AND DIMENSIONS - Required space: 1,655 x 1,125 mm - Machine height: 1,700 mm - Machine weight: 2,000 kg MACHINE HOURS - Operating hours: 13,837 h ACCESSORIES - Control: Fanuc Oi-TD - 3-color status light - Driven guide bushing - Parts removal - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump: 70 bar - Bar feeder: IEMCA ELITE 220 E / 32 LL - Fire extinguishing system * Gedpfeuhbbzjx Agyjbi NB: Functionality not guaranteed. Inspection by a qualified company on the part of the buyer is recommended. - Electrical transformer

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 42.768 h, proizvajalec krmilnikov: HEIDENHAIN, največja hitrost vretena: 18.000 obr/min, število osi: 5, Táto 5-osna DMG DECKEL MAHO DMU 50 eVo linear je bila izdelana leta 2005. Opremljena je s krmiljenjem HEIDENHAIN, notranjim hlajenjem skozi vreteno (IKZ) s tlakom 40 barov, skladiščem za 60 orodij in vretenom z do 18.000 vrt/min. Stroj ima avtomatizacijske možnosti, ki so popolnoma nastavljive za različne formate izdelkov in pozicioniranja. Če iščete kakovostno rezkalno stroj, razmislite o naši ponudbi stroja DMG DECKEL MAHO DMU 50 eVo linear. Za več informacij nas kontaktirajte. • Magazin za orodja: 60 orodij • Hlajenje skozi vreteno (IKZ): 40 barov • Vreteno obnovljeno leta 2024 • Obnova osi B in C leta 2024 Dodatna oprema • Avtomatizacija (obdelava izdelkov), prosto nastavljiva glede na format in pozicijo izdelka Gbodpfsx Rd Hpjx Agysi • Filter s papirnatim trakom • Blum laserska detekcija zloma orodja • Odsesovalni sistem ni vključen Tehnične specifikacije Sistem stožca SK 40

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), A Spinner simultaneous turning center featuring three turrets, complete with extensive accessories, spare parts, and tooling, is available. Travel paths X1/X2/X3: 180mm, Y1/Y2: +/-45mm, Z1/Z3: 704mm, Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Includes Top Automazioni bar feeder, coolant/high-pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tooling package, and additional spare parts. Documentation is available. On-site inspection possible. Gbedpfx Ageua E Trsyoi