Stroj za vrtanje globokih lukenj

TBT ML 250-2-1800 SO

Stanje: dober (rabljeno), Leto izdelave: 2009, obratovalne ure: 20.709 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106516-11, globina vrtanja: 1.200 mm, skupna masa: 7.500 kg, Prodajamo zelo dobro opremljen stroj za globinsko vrtanje znamke TBT z raznim priborom. Tehnični podatki: - Vreteno 1: 5–18 mm; vreteno 2: 1–4 mm - Globina vrtanja: cca 1200 mm pri Ø8 mm in uporabi 3 lunet - Število vreten: 2 - Pogon vretena: Vreteno 1: 1x 4 kW; vreteno 2: 1x 1,2 kW - Hitrost vretena: Vreteno 1: 600–6000 min⁻¹;vreteno 2: 2000–24000 min⁻¹ - Hitri pomik: 15.000 mm/min - Nazivni hod vozička: 1800 mm - Hladilno-mazalno sredstvo: olje za globoko vrtanje - Prostornina rezervoarja: 1100 litrov - Obratovalna napetost: 3AC 400V, 50Hz (skupna priključna moč: 25 kW) - Stanje: dobro, ustrezno starosti Nodpfjxgnhaex Acvodd - Pribor: vključno s talno kadjo in različnimi svedri Ogled na lokaciji je zaželen!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.000 mm, hitro pomikanje X-os: 25.000 m/min, hitri pomik os Y: 25.000 m/min, leto zadnje generalne obnove: 2025, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Technical specifications of the machine: Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Travel paths: X-axis (mm) 2,500 Y-axis (mm) 1,250 Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range (rpm): 15,000 Feed rates: X, Y & Z axis (mm/min): 10 - 10,000 Maximum rapid traverse speed: X, Y & Z axis (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Nodpfx Acev Rw Uuovodd Main spindle drive power: 100% duty cycle, 25 kW - Chip conveyor - Coolant lubrication system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m coiled cable - INA linear roller guide system RUE 45 on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this line are procured through a rigorous selection process and subjected to a comprehensive inspection (deep-dive check). After thorough cleaning, any identified obvious defects and faults are professionally repaired by our expert service team.

Stanje: dober (rabljeno), Leto izdelave: 2004, TBT ML 200-2-800 Deep Hole Drilling Machine TECHNICAL DATA Type: ML 200-2-800 Year of manufacture: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drill slide stroke: 800 mm Drilling range: 1 – 10 mm Method: Single-lip drill Drilling depth: Plunging spindle: 110 mm Sealing housing: 430 mm Sealing housing with steady rest: 400 mm Spindle drive: Power: 1.7 / 2.9 / 1.3 kW Voltage: 240 / 350 / 350 V Ndodpfx Acevcbg Ssvod Frequency: 100 – 800 Hz Weight: Approx. 2.6 t We do not assume any liability for the correctness, completeness, or currentness of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 1997, TBT ML 200-2-850 Deep Hole Drilling Machine Ndsdpsvca Rcofx Acvsd TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drilling slide stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Plunge spindle: 120 mm Sealing housing: 400 mm Sealing housing with steady rest: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed – self-driven Feed rate: 20 – 500 mm/min Rapid traverse NC operation: 12 m/min Feed force: 1.5 kN Motor torque: 2.2 Nm at 3000 rpm Tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Max. stroke: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control system: Sinumerik 805 M No guarantee is provided regarding the accuracy, completeness, or currency of the information given.

Stanje: dober (rabljeno), Leto izdelave: 1988, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> Control retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data: Grinding diameter: 20 - 300 mm Swing diameter: 350 (500) mm Workpiece length: 300 (1,300) mm Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding stroke speed: 0 - 9.99 m/min Feed rate: 0 - 99.99 m/min Incremental feed for reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm Resolution: 0.001 mm / Ø Rapid traverse: 5 m/min/R Grinding stroke speed: 0 - 5 m/min/R Feed rate: 0 - 99.99 m/min/R Incremental feed for reversal: 0 - 0.999 mm / Ø Ndedpfx Acjw Intajvod --> Swiveling capability of the workpiece spindle head: B-axis: -32° (-23°) / +2° Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm Resolution: 0.001 mm / Ø Traverse speed: 5 m/min --> Center height above workpiece table: 200 (300) mm --> Center height above grinding table: 330 (430) mm --> Workpiece spindle bore: 50 (70) mm

Stanje: dober (rabljeno), Leto izdelave: 2008, CNC Deep Hole Drilling Center Nodpfx Acswxaf Rovjdd Machine Type: Degen UTB800/G Control: Heidenhain TNC310 Year of Manufacture: 2008 TECHNICAL SPECIFICATIONS: Travel Paths: X-axis: 630 mm Y-axis: 400 mm Z-axis: 800 mm W-axis: 600 mm Feed Rate: 6,000 mm/min Swivel Range: Z: +/- 10° Table Size: 1,100 x 650 mm Max. Table Load: 2,000 kg Tool Holder: HSK 63 Max. Spindle Speed: 4,000 rpm Drive Power: 7.5 / 5.5 kW Drilling Diameter: 4-25 mm Equipment / Accessories: Electronic Handwheel High-pressure Pumps Internal Coolant Supply (IKZ): 0-90 bar Coolant Tank: 600 l Paper Belt Filter

Stanje: novo, The UWF 6 is a high-performance universal milling machine from the category of conventional milling machines and belongs to the group of universal milling machines. As the largest model in the UWF series, it features a robust design and impresses with a spacious working area as well as extended travel distances on all axes. It is equipped with a swiveling universal milling head, a horizontal spindle with an individual drive, and a highly flexible milling table, enabling the machining of large workpieces. The precision-ground guideways ensure long-term accuracy and reliability, while the powerful servo axis motor allows for stepless feed rate adjustments. A comprehensive range of features, including a coolant system and a 3-axis position display, optimize operational efficiency. Thanks to user-friendly features and a clear control panel, you can operate the UWF 6 with ease. Don’t hesitate to order this versatile conventional milling machine now and expand your manufacturing capabilities. Ndjdpfeu E Nwbjx Acvsd

Stanje: dober (rabljeno), Leto izdelave: 1985, Grinding depth 300 mm Centre height 300 mm Cross travel of grinding wheel head 150 mm Min. grinding diameter 20 mm Ndsdowrzzmepfx Acvsd Max. grinding diameter 300 mm Spindle head (U axis) 300 mm Workpiece spindle head (B axis) +/- 32° ( -23° ) +2° Max. table longitudinal travel 650 mm Machine weight approx. 7.5 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Jung C-740-C Year of manufacture: 1999 Control system: Siemens Magnet: 700 x 400 mm Maximum grinding range: 880 x 460 x 550 mm (X, Z, Y) Magnet with variable holding force Variable spindle speed: 1500–3500 rpm Ndodeu I Rtiepfx Acved Maximum table load: 800 kg Upper dresser 2x lower dressers Remote control Balancing device Various grinding wheels Documentation Machine is powered for inspection

Stanje: zelo dobro (rabljeno), Technical Data: - Min. drilling diameter: 16 mm - Max. drilling diameter: 35 mm - Reaming diameter: 65 mm - Max. drilling depth: 1,400 mm using ELB/BTA process - Machine footprint approx. 6,100 x 3,100 mm - Max. machine height: 2,400 mm - 2 separate drilling units mounted on the base machine bed, spindle distance 600 mm - Flat guideways - Feed drive via ball screw spindle and feed gearbox - Rapid traverse speed: 4,000 mm/min - Max. feed rate: 230 mm/min - Drive power (2 drilling spindles): 11 kW each - Stepless spindle speed up to max. 6,000 rpm - Hydraulically clamping tailstock with counter-rotation - Tailstock manually adjustable on base plate with longitudinal T-slots - Enclosure with sliding doors - 1 steady rest each - 1 rotatable clamping bell mount (base mount) each - 2 pre-centring units each - Drilling depth control via cam and limit switch Ndodpfxowq I Iqe Acvsd - CNC control SFT and FU, power supply 380 V / rated current 80 Amp. - Each unit has its own control system and dedicated feed motor With this machine, you are essentially getting two single-spindle machines, as each spindle is operated separately with its own control system and feed motor. We see ourselves as a competent partner in the field of deep hole drilling. We are also happy to receive inquiries for subcontracted deep hole drilling operations. Please feel free to contact us for any questions.