Površinski brusilnik

Jung C-740-C

Stanje: rabljeno, Leto izdelave: 1997, Grinding length: 880 mm Grinding width: 510 mm Control: Siemens Max. spindle speed: 4,300 rpm Grinding wheel diameter: 210 – 400 mm Grinding wheel width: 100 mm Total power requirement: 26 kW Machine weight approx.: 7.5 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Kwjdpfxowwl N Se Abbst Accessories, illustrated tools and clamping devices are only included in the scope of delivery if stated in the additional information. Technical data and information may be subject to change and error. Subject to prior sale!

Stanje: dober (rabljeno), Leto izdelave: 2002, Stroj je v dobrem stanju. Stranske plošče so bile odstranjene, zato ni potreben prevoz z nadširino. Kwodpstwpamefx Abbot

Leto izdelave: 2022, obratovalne ure: 0 h, Stanje: novo, Mobile cleaning centrifuge including buffer tank for waste water, agitator, and double-diaphragm air-operated pump. - New machine - Numerous other variants and special configurations available upon request Kwedpfef Sqfqjx Abbst Machine type: Process water centrifuge solid-liquid separation Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: Mass finishing technology, general solid-liquid separation, cooling lubricant treatment, wet blasting systems, ... Advantages: - High discharge performance thanks to acceleration forces of more than 1,800 times gravity acting within the system - Process water is recirculated, minimizing operating costs and protecting the environment - Savings on costly additives for the mass finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the fields of mass finishing, drying, and process water technology, custom-tailored to your application. From development through to production: We supply all our products from a single source, and everything is "Made in Germany." ----- Simply contact us — we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first provide you with a non-binding offer, which will also inform you about our general terms and conditions, cancellation rights, and legal notice before any purchase/contract is concluded.

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), A 3-axis precision milling machine, DMG Mori, is available. Travel path X/Y/Z: 200mm/200mm/190mm, spindle speed: 40,000 rpm, feed rate: 30 m/min, accuracy: 0.001mm. Machine dimensions (X/Y/Z): approx. 1800mm/1550mm/1850mm, weight: approx. 2,200kg, control unit: Siemens 840D, operating hours: 4,979h, spindle hours: 1,041h. The spindle was completely overhauled in 2023. An on-site inspection is possible. Ksdpfx Abjvi N D Sobswt

Stanje: rabljeno, Leto izdelave: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t G E I B E L & H O T Z CNC cycle-controlled precision surface grinding machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal travel 900 mm): 800 mm Max. grinding width (cross travel 500 mm): 500 mm Max. grinding height under wheel: approx. 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total drive approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Kwodpfxot Hxams Abbet Accessories / Special Equipment: • Easy-to-program GEIBEL & HOTZ grinding cycle control • Model SL with standard grinding programs including surface and multi-surface grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, loading station stop – all inputs/parameters via operator panel and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronics and SIEMENS OP 25 • Table movement via roller ring screw drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical axes driven by ball screw • Diamond dresser on the left side of the table next to the magnetic plate, with automatic dressing cycle, compensation, pull-back, and edge rounding on grinding wheels possible • MPM balancing device for grinding wheel • Mounted permanent electromagnet chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with separate band filter coolant filtration • Complete enclosure with electrically monitored sliding doors • Separate control cabinet, work lamp, various accessories, operation manuals Condition: Good to very good! The wide grinding wheel is suitable for large-area stock removal! Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals Kodpfx Ajtzdyzjbbewt The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: rabljeno, Leto izdelave: 1986, Grinding diameter: 350 mm Grinding length: 600 mm Center height: 175 mm Very well-maintained machine. The machine comes from a precision grinding workshop in the Black Forest. It can still be inspected under power at the seller’s site for a short time. In 2022, the machine underwent partial overhaul and maintenance at our facility, including geometry restoration according to the manufacturer’s protocol. Equipment: - 2-axis FAGOR digital readout - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Face grinding attachment - Internal grinding attachment - Internal grinding spindle Fischer UJ70 - Paper band filter - Automatic cycle: roughing – finishing – spark out – return Kwsdpov Tqqnsfx Abbot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 250 h, Lapping stroj Stähli FLM 750 Proizvajalec: Stähli Läpp Technik AG Tip: FLM 750 Leto izdelave: 2013 Napetost/Frekvenca: 3x400V + N + PE / 50Hz Poraba moči: 11,5 kW Maksimalni tok: 25 A Teža: 2500 kg Premer rotacijskega stola: 750 mm Notranji premer izravnalnega obroča: 300 mm Kedpfoxpnnxox Abbewt Hitrost vrtenja: 6–75 obr/min Pogon moči: 4,0 kW Pnevmatični cilindri: 3 kosi Dovod stisnjenega zraka: 6–10 bar Dimenzije: 1700 x 1250 x 2200 mm Raven hrupa:

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Kjdpfxsvy Ihdj Abbswt Rotary axis C: +/- 200° Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools upon agreement

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, TRUMPF TruDisk 5001 (6C) Kedpfjqfguasx Abbjwt * Year of manufacture: 2017, as new condition * Laser power: 5 kW * Wavelength: 1030 nm * Beam quality: 4 mm mrad * Beam switch with 4 LLK outputs, minimum fiber diameter: 100 µm * Fiber connector: LLK-D * Optional fieldbus interface and IIO3 card available * 2 units available