Posteljni rezkalni stroj

Soraluce TA-D25

Stanje: dober (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.000 mm, Travels Longitudinal (X): 2500 mm Vertical (Y): 1250 mm Transversal (Z): 1000 mm Table size (rotary): Length: 1000 mm Width: 1000 mm Max. table load: 5000 kg T-slots: 6 x 22 mm H10 Drive power: 100% duty cycle, 24 kW Tool holder: ISO 50, DIN 69871 - AD Spindle speeds: 20 – 4000 rpm Torque: 479 Nm Feed range X, Y, Z axes: 10 – 10000 mm/min Rapid traverse X, Y, Z: 25000 mm/min Machine weight: approx. 15000 kg Equipment: - Internal coolant supply according to DIN 69871 Form AD including minimum quantity oil lubrication with 15 different dosing levels activated by M functions (programmable): 20 bar Fpsdpfx Abeykbxzjvjd - NC rotary table, size 1000 x 1000 mm as 4th axis integrated into machine control. Max. workpiece load 5000 kg, positioning accuracy ± 5", table surface with 22 T-slots - Chip conveyor for TA-D 25 - Tool changer Accessories - Front-positioned, movable operator panel with Heidenhain iTNC 530 control (single processor) - Portable electronic handwheel HR 420 with 3 m spiral cable (option) - 3D thermal expansion compensation - Automatically indexing milling head / 2 planes, 2.5° increments (H200) (option) - Distance from spindle nose to table edge: 250 mm - NC rotary table, size 1000 x 1000 mm, as 4th axis integrated into machine control. Max. workpiece load 5000 kg, positioning accuracy ± 5", table surface with 22 T-slots. - Coolant system with 150 l tank capacity, pump pressure 5 bar, delivery rate 50 l/min, outlet via ring nozzle around machine spindle - Fully enclosed splash guard cabin with sliding doors at the front, additional sliding door on the left column side, and viewing windows on all 4 sides - Heidenhain drive motors on all axes with digital drive technology - INA linear roller guide system on all axes - Direct linear measuring system by Heidenhain on all axes - Telescopic covers on X-axis guides - Precision ball screws on X, Y and Z axes - Automatic cycle lubrication for all axes and moving components - Electrical equipment by Siemens - Hydraulic unit by Vickers

Leto izdelave: 2009, stanje: dober (rabljeno), Lifting capacity: 30 t Fedpfjqiz N Rjx Abvopd Precision lift Lifting height: 9 meters

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL KEY DATA Year of manufacture: 2020 Travel/capacities: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Cross (Z): 1,500 mm Clamping surface NC rotary table: Rotary indexing table: 2,400 x 1,900 mm Fjdeygiwqopfx Abvepd Max. transport load (with centrally supported load): 10,000 kg Positioning accuracy arc/sec: ± 2.5" Max. swing diameter: approx. 2,900 mm Paintwork: RAL 7024 graphite grey RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Pull stud: DIN 69872 Form A Main spindle drive: Motor/brand main spindle drive Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed control/gearbox: 3-stage (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: low range rpm 0-738 mid range rpm 739-1,842 high range rpm 1,843-6,000 Axis drives/axis feed rates: Axis drive motors: brand Heidenhain (digital drives) Rapid traverse max.: X, Y, and Z axis 25,000 mm/min Feed rate max.: X, Y, and Z axis 15,000 mm/min Max. average acceleration: 2 m/s² Max. feed force: X, Y, and Z axis 26,000 N Linear axis drive systems: X-axis (longitudinal): preloaded ball screw Ø 63 x 40 Z-axis (vertical): preloaded ball screw Ø 63 x 20 Y-axis (cross): preloaded ball screw Ø 50 x 20 Guide system: X-axis (longitudinal) 6 pcs. type INA RUE 55 EL Z-axis (vertical) 4 pcs. type INA RUE 65 EL Y-axis (cross): 8 pcs. type INE RUE 55 E-HL and additional damping unit Clamping table / table surface: T-slot size 10x: 22 H 12 mm Reference slot center 1x: 22 H 8 mm T-slot spacing: 150 mm (pitch spacing outer slots 1,800 mm) Weight: Weight RT3000: approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 positions Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system with boost to 37 bar IKZ Special operating mode 4 RepairFIT is our proven offer for a profitable entry into our product lines. Machines offered in this line are sourced by us following a strict selection process and subjected to a thorough inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are professionally rectified by our expert service team.

Stanje: pripravljen za uporabo (rabljen), skupna višina: 3.300 mm, skupna širina: 3.450 mm, skupna dolžina: 6.000 mm, proizvajalec krmilnikov: Siemens, lastna masa: 17.000 kg, Model: FTV 850 Hlajenje skozi vreteno Delovno območje se lahko razdeli na dva dela 2 magnetni mizi Premični steber, podoben Mazak VTC / Unisign / Hedelius Težka konstrukcija ogrodja Fpedpswxz D Uefx Abved Vzdolžno pomikanje X-os: 1800 mm Prečno pomikanje Y-os: 850 mm Vertikalno pomikanje Z-os (višina): 800 mm Dimenzije vpenjalnega prostora – miza: 2300 x 900 mm Univerzalna glava (2x 360°): ISO 50 Vrtalna glava (1 x90°): 19 kW

Stanje: novo, Leto izdelave: 2026, The TYTAN CENTER 750 Vario lathe-milling machine is a combination of two machines, offering convenience of use and space-saving benefits in the workplace. It features variable speed control for the combined turning-milling spindle. Turning capacity: 250x750 mm, 0.75 kW/230 V + Milling: 0.6 kW/230 V. It performs turning functions such as machining external and internal cylindrical surfaces, thread cutting, and parting off workpieces. Milling functions include slot milling, drilling, and reaming. This machine is suited for small industrial businesses, workshops, garages, etc. Main advantages of the machine - Combination of two functions – turning and milling – in one compact design. - Separate spindle motors for lathe and mill with stepless speed adjustment – allows for independent operation of both functions. - LCD displays for monitoring and precise spindle speed setting. - Two spindle speed ranges – adaptable to different materials and machining methods. - Machining of complex components – eliminates the need for re-clamping on a different machine. - Rigid dovetail guideway – ensures high stability during milling operations. Technical data LATHE 3-jaw chuck: 125 mm Swing over bed: 250 mm Swing over cross slide: 150 mm Distance between centres: 750 mm Bed width: 135 mm Spindle bore: 29 mm Spindle taper: MT4 Spindle speed control: Variable (2 ranges) Spindle speed: 50–1125 / 100–2250 rpm Metric threads: (18) 0.2–3.5 mm Imperial threads: (21) 8–56 TPI Longitudinal feed: (6) 0.07–0.4 mm/rev Tool post size: 65 x 65 x 20 mm Max. tool size: 12 x 12 mm Top slide travel: 70 mm Cross slide travel: 130 mm Longitudinal travel: 630 mm Tailstock quill diameter: 30 mm Tailstock quill stroke: 70 mm Tailstock taper: MT2 Motor power (S1/S6): 0.75 / 0.9 kW / 230 V MILLING MACHINE Max. drilling diameter: 16 mm Quill taper: MT2 Quill stroke: 50 mm Head tilt: –90° to +90° Spindle to column distance: 170 mm Spindle to table distance: 43–250 mm Spindle speed range: 50–2250 rpm T-slots (number and size): 2 x 8 mm Motor power: 0.6 kW / 230 V GENERAL PARAMETERS Machine dimensions (LxWxH): 1350 x 580 x 1630 mm Weight: 230 kg Fpsdow H Rdmopfx Abved Standard equipment - 125 mm 3-jaw lathe chuck + reversible jaws - Machine base - Fixed centres MT2 and MT4 - Arbor and drill chuck MT2/B16 - Change gears - Complete set of wrenches, grease gun, service tools - CE-compliant guards

Leto izdelave: 2012, stanje: dober (rabljeno), Muratec MW120 GT naprodaj Rabljeno, v odličnem stanju. Fedpfx Abeifi D Tsvjpd Ogled stroja je možen po dogovoru. Dostava je odgovornost kupca, po potrebi pa lahko pomagamo pri pakiranju in nakladanju. Dobava: EXW Székesfehérvár

Stanje: novo, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). Save 24% off RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump—perfect for precision tasks. Available versions: 30t 60t 100t 150t 200t >200t: upon request Special-purpose machines: upon request Brand new machine! We can also build a custom press tailored to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tonnes. The press can be operated either fully electrically using a lever, or manually for fine adjustments using the hand pump (ideal for jobs like pressing bearings, straightening, etc.), allowing precise manual force control. The ram cylinder is mounted on a traversing carriage, enabling side-to-side movement and maximum utilisation of the frame’s passage width. Fsdpfx Aef Sqcksbvjpd Features: - 150 tonnes maximum pressing force - Pressure gauge with manometer - Two operation modes: electric or manual - Two independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - Adjustable working height - Pull chains for easy adjustment of bed height - Robust machine frame - Side-adjustable cylinder (mounted on carriage) The press can be tested onsite under power. ----- Many more workshop presses available in various designs, sizes, and with optional extras! 30, 60, 100, 150, 180, 200 tonnes. ----- Simply contact us—we’ll be happy to provide non-binding, expert advice. Price stated is net, plus 19% VAT. All information subject to change and non-binding. Europe-wide delivery possible! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This listing solely serves as an online presentation of our goods. Contracts are negotiated via telecommunications (email, fax, phone, messaging portal): we will first send you a non-binding offer, including our terms and conditions and cancellation policy with legal notice, before any purchase/contract is finalised.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 415 mm, stružna dolžina: 850 mm, premer struženja: 390 mm, izvrtina vretena: 105 mm, največja hitrost vretena: 2.000 obr/min, potovalna razdalja osi X: 225 mm, pomik po osi Z: 950 mm, hitro pomikanje X-os: 15 m/min, hitri pomik na osi Z: 15 m/min, skupna višina: 1.980 mm, skupna dolžina: 4.600 mm, skupna širina: 1.900 mm, premer tulec: 100 mm, poteza s peresom: 120 mm, skupna masa: 7.000 kg, prehod palice: 90 mm, zunanji premer vpenjalne glave: 300 mm, proizvajalec krmilnikov: Siemens, model krmilnika: 828D + Shopturn, Oprema: dokumentacija / priročnik, Maximum turning diameter: 390 mm Z-axis travel: 950 mm Maximum spindle speed: 2,000 rpm AC spindle motor SIEMENS (continuous/15 min): 25/33 kW Bar capacity: 90 mm Spindle nose: A2-11 Including accessories, among others: SAUTER 12-station turret VDI-40 Trifix mount for driven tools C-axis with spindle clamp and stabilization Wide and robust flat guides 45° slant bed for optimal chip removal Hinged belt chip conveyor with chip bin Kitagawa 3-jaw power chuck ø 300 mm Manual tool measurement swing-in Manually adjustable hydraulic tailstock with programmable quill Fedpfx Ajfk Et Aebvepd Coolant system with high-performance pump (4 bar) Rittal filter fan on the control cabinet

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Multifunkcijsko CNC stružno-vrtalno-rezkalno središče / Proizvajalec: WFL Tip: M120 MILLTURN x 3000 / Leto izdelave: 2008, prenovljen 2025 TEHNIČNI PODATKI: Delovno območje: - Razdalja med konicama / dolžina obdelave (odvisna od vpenjala): 3.000 mm - Premer kroženja nad posteljo (največja nazivna mera): 1.220 mm - Premer kroženja nad zgornjim suportom: 1.140 mm Dodatna oprema / konfiguracija: - CNC krmiljenje Siemens SINUMERIK 840D pl - Enota za struženje/ vrtanje / rezkanje - NC-rahločni konjiček - Zunanje orodjarno, 90-kratno - Pick-up postaja - Sistem za hlajenje - Transporter odrezkov - Nadaljnja bogata oprema ... Podrobno tehnično podatkovno listo in informacije o opremi dobite na zahtevo. Fpjdpfjxt Uqhsx Abvod Brez jamstva za popolnost in pravilnost tehničnih podatkov in opreme.

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Travelling distance X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15,000N/15,000N/17,500N, traverse speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6,000rpm. Magazine spaces for max. tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in system: 6, coolant tank volume: 1,500l, 50bar high-pressure pump capacity: 22l/min. Machine dimensions X/Y/Z: approx. 6,300mm/4,900mm/4,000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated IPM tool monitoring, remote diagnostics via modem, Renishaw MP10 probe, 4-position RSP rotary buffer, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing unit, 6x pallets, of which 4x clamping towers with universal clamping strips, approx. 100x HSK 100 tool holders, and Losma filtration system. Documentation available. An on-site inspection is possible. Expected to be available from the end of January 2025. Fsdpouxdhuofx Abvspd