Stiskanje okvirja

STETON STP

Stanje: novo, Leto izdelave: 2025, Working width: 400 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, individually adjustable 1st brush: Scotch Brite Medium / Diameter 220 mm, variable speed drive 2nd brush: Scotch Brite Hard / Diameter 220 mm, variable speed drive Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 3 kW / both with variable speed drive (infinitely adjustable) Feed motor power: 0.37 kW Machine length: 1400 mm Ffjdpfx Afji Hpk Ujlot Machine width: 900 mm Weight: 500 kg

Stanje: rabljeno, Keyway Spindle 1 pc. Number of Milling Units: 5 pcs. Spindle Diameter: 50 mm Control System: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC Spindles Machine is cleaned and fully inspected prior to delivery Technical Data Summary (Please enquire about any additional included accessories) Pos. 1: Cross-Cut Saw ----- > Number of Tools: 1 pc. > Spindle Speed: 2,800 rpm > Spindle Diameter: 40 mm > Max. Tool Diameter: 400 mm > Motor Power: 3 kW > Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding > Laser Guidance for cutting section detection Pos. 2: Rounding Unit, Horizontal Lower ----- > Position: horizontal, lower > Motor Power: 1.5 kW > Spindle Diameter: 20 mm > Clamping Length: 25 mm > Spindle Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment mechanically linked with cross-cut saw > Radial Adjustment pneumatically controlled, on/off NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and Keyway Spindle ----- > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 3,500 rpm > Max. Cutting Circle: 320 mm > Spindle Diameter: 50 mm > Max. Tool Diameter: 320 mm > Motor Power: 11 kW Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling) ----- > Position: vertical, right > Number of Tools: 1 pc. > Tool Clamping Length: 120 mm > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 7.5 kW Ffsdjvu Hghjpfx Aflot Pos. 5: 2nd Profiling Spindle ----- > Position: vertical, right > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 11 kW 2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash Bar Guide consisting of: Guide rail at the stop (climb milling section), Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 6: Profiling Milling Unit, Horizontal Upper ----- > Clamping Length: 40 mm > Spindle Diameter: 40 mm > Motor Power: 3.0 kW > Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment: 30 mm, 8 positions > Radial Adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool Clamping Length: 160 mm > Axial Adjustment: 115 mm, 8 positions > Radial Adjustment: 110 mm, 8-position turret > Spindle Speed: 5,850 rpm > Spindle Diameter: 40 mm > Max. Cutting Circle: 210 mm > Motor Power: 3.0 kW Pos. 8: Profile Milling/Grooving Unit, Bottom ----- > Motor Power: 3.0 kW > Tool Clamping Length: 125 mm > ...

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Samodejno nalaganje in razlaganje Napredne zmogljivosti obdelave Idealno za serijsko proizvodnjo Izboljšajte svojo proizvodnjo oblog vratnih podbojev z napravo Centauro Alfa Jamb – najsodobnejšim strojem, zasnovanim za samodejno nalaganje, obdelavo in razlaganje vratnih oblog in podbojev. Centauro Alfa Jamb združuje natančnost, učinkovitost in uporabniku prijazno tehnologijo ter predstavlja najboljšo rešitev za izdelavo vratnih podbojev. Zmogljiva glava CNC rezkalnika omogoča izvedbo tako vertikalnih kot horizontalnih obdelovalnih operacij. Ta vsestranska rezkalna glava je idealna za izdelavo utorov za tečaje ali ključavnice ter zagotavlja, da je vsak rez narejen natančno in dosledno. Poleg tega je priloženo tudi specializirano majhno rezkalo, namenjeno točkovnemu vrtanju lukenj za vijake tečajev in poravnavanju kotov utorov za tečaje, kar dodatno izboljša natančnost in kakovost končnega izdelka. Fjdpfsul Uaaox Aflsft Alfa Jamb avtomatizira celoten proces od nalaganja do razlaganja, tako da se lahko operaterji posvetijo zahtevnejšim nalogam, medtem ko stroj opravlja ponavljajoče se postopke. Programiranje je poenostavljeno s sodobnim barvnim kapacitivnim zaslonom na dotik TOP12-S, ki omogoča intuitivno uporabo. Prednameščene elektronske makro nastavitve omogočajo hitro pripravo in spreminjanje obdelovalnih operacij. Tehnične specifikacije: X os hod: 2800 mm Y os hod: 180 mm Z os hod: 150 mm Primeren za podboje dimenzij 2400 x 200 x 75 mm Glava za rezkanje/vrtanje: 3,3 kW, ER25, 0–18.000 rpm Glava za vrtanje pilotnih lukenj: 2,2 kW, ER25, 0–18.000 rpm 3 pnevmatske vertikalne prijemalne klešče, samodejno aktivirane skozi program 3 pnevmatske horizontalne prijemalne klešče, samodejno aktivirane skozi program Industrijski zaslon na dotik TOP12-S, 12'', z enostavnim makro programiranjem CE varnostna ograja ob straneh in zadaj ter svetlobna pregrada spredaj Priključek za odsesavanje prahu: 120 mm Pnevmatska povezava: 6 bar Skupne mere: 9644 x 1844 mm Skupna teža: 2000 kg Skupna priključna moč: 5,6 kW Letnik: 2023, v skladu s CE Stanje: kot novo, uporabljeno le za demonstracije v razstavnem salonu

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Carriage length: 3200 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 170 mm Scoring unit: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 500 mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Ffedpstnggyofx Aflet Motor brake: yes / automatic Extraction connection: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 900 kg

Stanje: dober (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 1.230 kg, AUTOMATIC DOUBLE-HEAD SAW STB / FIMTEC SD 500 S6 YEAR 2005 Fodpfxsr E Alqs Afloft

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Technical Specifications: Edge thickness (coil material): 0.4 - 3 mm (material dependent) Edge thickness (strip material): 0.4 - 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (limitations possible with certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: - Motorized pressure bridge adjustment - Extendable XL workpiece support, spacing 600 mm - 3-color LED signal light at infeed - Motorized adjustment of infeed fence - Long infeed fence 1252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool correction - f.a.s.t = fast setting technology - ECO-Mode energy saving mode - Preparation for RETURN connection (third-party) - Guide system BS 501; precise 90° workpiece feeding for edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 - 450 mm - Jointing unit FG201 with 2 cutting heads, 64 mm height - Edge feed MG 301 - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - Swivels 90° for easy cleaning of the glue jet nozzle - Includes vacuum pump for professional PUR adhesive processing. The PUR is deprived of the reaction partner (water molecules) by the vacuum pump, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently from the machine's power supply and automatically compensates for any vacuum loss. Full control over PUR! - Pressure unit DW 301 with motorized NC axis; 1st roller driven with pneumatic dip control, 2 conical pressure rollers - GM301 spray unit after pressure station for high-gloss edges - KA 501 pneumatic end trimming unit (60 mm) - Extraction hoods for end trimming unit - Multifunctional milling unit FR301 MOT6 Ffodpfxsxymd To Afljt - Shelf program - Profile trimming unit FF 301 MOT1 - Scraper unit ZK301 MOT4 including high-gloss package - Flat scraper FK702 - Complete separation and cleaning fluid spray unit - GM 301 spray unit after pressure station (for high-gloss edges) - Buffing unit SW 501 Piping above the machine is not included in the scope of delivery. Availability: short notice Stock location: Hochheim

Stanje: novo, Leto izdelave: 2023, Oscillating sanders are designed for sanding straight, curved, and shaped parts with round or oval cross-sections etc., as well as with variable thickness for chairs, tables, beds, and related items. The main features of the machine include: frame made of electro-welded steel – rotating disc with two counter-rotating sanding belts driven by an electric motor, with a rotary movement around the workpiece – electrical control panel – 2 adjustable work tables (infeed – outfeed) – option for integration of 2 automatic workpiece feed units with adjustable speed via frequency inverter. Sanding belts: 80 x 1260 mm Min./max. workpiece diameter: 10–100 mm (Ø) Min. bending radius: 200 mm Dimensions: 760 x 1000 x 1800 mm Ffodpeqnufvjfx Afljt 3 units available Camam, Comec, OMEF, Brusa di Garboli

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Popolnoma delujoč UniControl 12, letnik 2006, iz Norveške. - Za natančne tehnične specifikacije prosim odprite priloženi PDF dokument. Prečni prerez UniTec 12: - žagalna enota - rezkar za zaobljanje robov od spodaj - dvigovalno vreteno št. 1 Fsdpemgc I Nofx Afleft - dvigovalno vreteno št. 2 - dvigovalno vreteno št. 3 Dolga, profilna sekcija UniVar 12: - profilni rezkar - profilni rezkar - profilni rezkar vodoravno - profilni rezkar - profilni rezkar - profilni rezkar Skupna električna moč 114 kW, 400 V AC Potrebna moč odsesavanja 270 m3/min Potrebni stisnjen zrak 1000 L/min Stroj je bil v uporabi do 15.08.2023 Plačilo: pred nakladom Dostava: ex tovarna Rendalen - Norveška Stroj se nahaja na Norveškem (v bližini Trondheima) Trenutno je stroj odklopljen, shranjen v suhem in toplem skladišču ter je pripravljen za pošiljanje. Rekman Maskin & Service - servis lesnoobdelovalnih strojev od 1986.

Stanje: rabljeno, Corner Processing Line Weinig Unicontrol 10 (UC 10) for the production of windows, components, and doors. Suitable for frame-based, series, or single-piece production, featuring 2 tenoning and slotting spindles including Oertli tool set. - Units: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and slotting spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profile milling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW Ffedpfx Aev Ag Tdefljt 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis, 3 kW - Double workpiece package - Profiling rework package with rework carriage - Automatic flipping system - NEXUS PC control - CNC-controlled length stop - Studio window setup - Unit for edge rounding from below with crosscut saw - Georgian bar support rail - Incl. extraction pipe system - Incl. Oertli tool set - Additional technical data and tool drawings available on request.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Μηχανή συγκόλλησης άκρων Hebrock F5 με σύστημα ελέγχου PLC, δοχείο ταχείας θέρμανσης με επίστρωση και χωρίς συντήρηση, με προκαταρτική ρύθμιση για γρήγορη αλλαγή δοχείου θέρμανσης. - Οθόνη αφής 10" - Μέγιστο πάχος ταινίας/άκρου: 3mm - Ελάχιστο μήκος τεμαχίου: 160mm - Ταχύτητα τροφοδοσίας: 7m/min - Έτοιμη προς λειτουργία σε περίπου 3,5 λεπτά Ffedpfxjwyu Rwo Aflst - Μέγιστη κατανάλωση ισχύος: 7,4kW - Ηλεκτρική σύνδεση: 400V/3ph/50Hz - Ύψος τραπεζιού: 900mm - Διαστάσεις μηχανήματος: 4300x1300x1400 mm - Βάρος περίπου: 900Kg Επιπλέον εξοπλισμός • Κεφαλή προ-φρεζαρίσματος Whispercut, ύψος τεμαχίου 50mm • Συνδυαστική κεφαλή κοπής • Ακτίνα για γωνιακό στρογγύλισμα R = 2mm • Στρογγύλισμα γωνιών R = 2mm • Συσκευή ταχείας αλλαγής για τον κινητήρα στρογγυλοποιητή γωνιών • Ξύστρα πολλαπλής ακτίνας R2/R1 • Μονάδα ψεκασμού διαχωριστικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού • Ψεκασμός προστασίας ακμής • Υποδοχές για τη φρεζαριστική μονάδα και τη ξύστρα προφίλ ακτίνας • Πνευματική ρύθμιση 3 σημείων • Πολυεργαλείο (R2/R1/λωρίδα) • Εσωτερικός LED φωτισμός