Edgebander

STEFANI ACTIVA 1-73

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Technical Specifications: Edge thickness (coil material): 0.4 - 3 mm (material dependent) Edge thickness (strip material): 0.4 - 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (limitations possible with certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: - Motorized pressure bridge adjustment - Extendable XL workpiece support, spacing 600 mm - 3-color LED signal light at infeed - Motorized adjustment of infeed fence - Long infeed fence 1252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool correction - f.a.s.t = fast setting technology - ECO-Mode energy saving mode - Preparation for RETURN connection (third-party) - Guide system BS 501; precise 90° workpiece feeding for edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 - 450 mm - Jointing unit FG201 with 2 cutting heads, 64 mm height - Edge feed MG 301 - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - Swivels 90° for easy cleaning of the glue jet nozzle - Includes vacuum pump for professional PUR adhesive processing. The PUR is deprived of the reaction partner (water molecules) by the vacuum pump, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently from the machine's power supply and automatically compensates for any vacuum loss. Full control over PUR! - Pressure unit DW 301 with motorized NC axis; 1st roller driven with pneumatic dip control, 2 conical pressure rollers - GM301 spray unit after pressure station for high-gloss edges - KA 501 pneumatic end trimming unit (60 mm) - Extraction hoods for end trimming unit - Multifunctional milling unit FR301 MOT6 - Shelf program - Profile trimming unit FF 301 MOT1 - Scraper unit ZK301 MOT4 including high-gloss package - Flat scraper FK702 - Complete separation and cleaning fluid spray unit Gedpfexymd Tox Afqeil - GM 301 spray unit after pressure station (for high-gloss edges) - Buffing unit SW 501 Piping above the machine is not included in the scope of delivery. Availability: short notice Stock location: Hochheim

Stanje: rabljeno, številka stroja/vozila: 008131, Maks. širina panela: 4400 mm Gjdsw Idh Hjpfx Afqoil Maks. dolžina panela: 4400 mm Maks. izhod glavnega žaginega lista: 75 mm Število vpenjalnih čeljusti: 7

Stanje: dober (rabljeno), Leto izdelave: 2014, Kavni vložkovni polnilni in pakirni stroj Gjdsucf S Tspfx Afqoil Popoln in v dobrem delovnem stanju Nadglavni dozirni lijak Avtomatski online dozirnik Hitrost: 300 paketov na uro Popoln s Simens zaslonom na dotik Topli lepilni stroj za lepljenje kartonov

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.300 mm, dolžina pomika po osi Y: 4.300 mm, dolžina rezanja (maks.): 4.300 mm, višina reza z zareznim rezilom (max.): 4.300 mm, premer žaginega lista: 380 mm, HPP 380/43/43, popolnoma avtomatsko nalaganje s TBP 200/31/22/ Glavni motor 18,5 kW Stroj deluje odlično, možen preizkus delovanja Holzma Profi HPP 380 Dolžina reza: 4.300 mm Širina reza (programsko voden pomik potiskača): 4.250 mm Gisdpfx Afoxvz T Isqsl Miza z zračno blazino: 2.160 x 650 mm, 3 kos + 1* 2.810 mm dolžine Centralni puhalnik: 1 enota z izboljšano zmogljivostjo puhanja 2 dodatni napravi za poravnavanje Tehnični podatki: Izvlek žaginega lista: 95 mm Podajanje vozička žage: naprej 1–130 m/min, nazaj stalno 130 m/min Glavni motor žage: 18 kW Predrezovalni motor: 2,2 kW, VVSH agregat, programsko voden, vertikalno dvižen Obratovalna napetost: 400 V (+10%/-5%) / 50 Hz Električna priključna moč za glavni motor žage 18 kW: 24 kW Krmiljenje Power Control CADmatic 4.0 s 17-palčnim ravnim zaslonom Označevanje z grafiko kosov / program etikete / tiskalnik etiket PICA 104

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: The machine was operated in Germany and regularly maintained (last maintenance by Homag in 11/2024) Equipment and technical data: Workpiece thickness min.: 12 mm Workpiece thickness max.: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) Edge thickness min.: 0.3 mm (coil material) / 0.4 mm (strip material) Giedpfxowx Aaqs Afqjl Edge thickness max.: 3 mm (coil material) / 20 mm (strip material) Feed speed: steplessly adjustable 18–25 m/min (frequency controlled) Type of glue: EVA hot-melt adhesive Glue application (tank / cartridge / nozzle): melting unit with granulate hopper Glue volume / cartridge size: granulate hopper, melting capacity 18–35 kg/h, level-regulated Heating-up time: approx. 8–10 min Edge magazine (slots): 2 rolls (automatic roll change) Automatic edge change: yes (automatic via PC22, manually switchable) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: trimming unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush trimming: via pre-milling unit, pneumatically adjustable Radius trimming: profile trimming unit FK13, automatic 8-position tool changer (R = 2 mm) Bevel / profile trimming: yes, via FK13 pneumatically adjustable Scraper: integrated in multi-finish unit MN21 Polishing: buffing unit in the finish unit FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece pre-heating: available Separating agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: several Ø 100 mm (individual extraction per aggregate) Control: power control PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EU directive 98/37/EC Dimensions / space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor shown in the pictures is not included in the scope of delivery! Availability: short-term Location: Lithuania

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure Gsdpewhmdfofx Afqjil No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: rabljeno, Leto izdelave: 2014, Power Control PC 22 control unit with WoodWop – POWERTOUCH software. Panel thickness: 8 - 60 mm. PVC/ABS edge thickness: 3 mm. Feed speed up to 25 m/min (20 m/min with corner rounding). Electronically adjustable working height via CNC. Motorized, rubberized belt with superior pressure. Panel support guide and assisted loading for small panels. Controlled infeed guide. Anti-adhesive unit. Pre-milling unit with two 3 kW motors, 9000 rpm, with ball bearings. Glue application unit for PUR adhesive with pre-melter and glue tank. Edge pressure unit for straight profiles with electronically adjustable pressure rollers (CNC-controlled). Trimming unit with two motors (automatic tilt adjustment?). End trimming unit with two motors. Corner rounding unit with two multifunction motors (trimming + rounding) with CNC control. Edge scraping unit. Glue scraping unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS MUST BE VERIFIED. Gijdpfxjvqbh Ej Afqsl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Machining Center Rover 20 Working area: 2,893 x 950 mm, milling spindle with ISO30 tool holder, 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills plus grooving saw, 6-position tool changer. The NC410 control system features a floppy disk drive, color screen, and very simple, graphically assisted programming options. Additionally, the Rover 20 already enables pendulum (dual-zone) machining. Dimensions: approx. 3,800 x 2,000 mm, height 1,600 mm Control cabinet: 950 x 700 x 1,300 mm Ex site Gijdslc Dwnopfx Afqsl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 1.200 h, Funkcionalnost: popolnoma funkcionalen, Razrezovalka plošč Holzma HPP 380 Profiline z avtomatskim etiketirnikom. Gjdpfjxytlkox Afqoil

Stanje: dober (rabljeno), Leto izdelave: 2002, Edge banding machine with jointing milling unit; otherwise fully equipped. PU glue can be used. Gedpfx Afjgmn H Aeqjil