Linija za robove in obdelavo

STEFANI + MAHROS EVOLUTION SB ONE

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 Dodpfxjd Nt Rqs Aflskg - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Stanje: delavnici obnovljeno (rabljeno), DOUBLE-SIDED EDGE BANDING AND FORMATTING MACHINE - 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transfer beam (master & slave systems) Safety and noise protection cabin Dedpfx Afodh Tfgoljkg FORMATTING UNIT (for each side): Spraying unit (for liquid release agent) Interchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (for each side): Gluing unit (hot melt + premelter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment no.): 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Scraper unit 08.517 Sprayer unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Stanje: zelo dobro (rabljeno), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE UNIT FOR LOT 1 Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 8 – 60 Dkjdpfx Afsifnzdeljg Control unit: ICOS open Feed speed m/min (adjustable): 7–35 Upper pressure: V-belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler: CNC controlled. Panel infeed system: A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing station (P.U.R. adhesive + premelter) 2 – VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartments No.): 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°–25°) 30 m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Spraying unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Spraying unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rabbeting and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Stanje: rabljeno, Leto izdelave: 2007, Slotting spindle 3 pcs. Number of milling units: 5 pcs. Dkedjw Im Iiepfx Aflog Spindle diameter: 50 mm Control: Control 100 PC SCM Windor 100 CNC ----- Powerful and versatile CNC production line for windows and doors Processing of workpieces up to max. 4500 mm length, 250 mm width, and 150 mm thickness Comprising Windor 60, version B Infeed conveyor Slotting section: ----- Pos. 1: Cross-cut saw ----- - Motor: 4 kW - 3000 rpm - Spindle diameter: 40 mm - Max. tool diameter: 400 mm, bore 80 mm Pos. 2: 1st slotting spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3500 rpm - Max. tool diameter: 370 mm - Counter unit "Jolly" - Stepless vertical positioning - Interpolating rotation, automatic inclined window adjustment +/- 60 degrees Pos. 3: Electrospindle with HSK 63 F tool holder ----- - Min./max. rotation speed: 1000-12000 rpm - Max. motor power: 11 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Pos. 4: 2nd slotting spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3500 rpm - Max. tool diameter: 370 mm - Counter unit "Jolly" - Stepless vertical positioning - Interpolating rotation, automatic inclined window adjustment +/- 60 degrees Pos. 5: 3rd slotting spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3500 rpm - Max. tool diameter: 370 mm - Counter unit "Jolly" - Stepless vertical positioning Fleximat ----- Including left and right stops with horizontal CNC positioning for the following through-feed operations: Lock case mortising and 9-degree Anuba drilling from the right. Dowel holes and strike plate markings from left and right, 7 spindles each. Cup hinge drilling and olive drilling from above. Profiling section ----- Pos. 5: Power 2000 F4: Electrospindle with HSK 63 F tool holder ----- - Working from the left - Min./max. rotation speed: 1000-18000 rpm - Max. motor power: 12 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Pos. 6: 1st profiling spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6000 rpm - Tool diameter min./max.: 130-250 mm - Stepless vertical positioning - Stepless horizontal positioning Pos. 7: 2nd profiling spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6000 rpm - Tool diameter min./max.: 130-250 mm - Stepless vertical positioning - Stepless horizontal positioning Pos. 7: 3rd profiling spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6000 rpm - Tool diameter min./max.: 130-250 mm ...

Leto izdelave: 2017, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, FOM Industrie ARGO 70 3-Axis CNC Machining Center for drilling and milling operations on steel or aluminum profiles. TECHNICAL DETAILS X-axis (top only): 6,780 mm X-axis (top + heads): 6,630 mm Y and Z axis for machining on upper and rear sides: 545 mm x 295 mm Y and Z axis for machining on 3 profile sides: 440 mm x 295 mm Pneumatic rotation: 0°, 90°, 180° Spindle speed: max. 17,000 rpm Profile width: max. 545 mm Bar length: max. 6,780 mm Number of milling spindles for aluminum: 1 Tool changer positions: 12 POSITIONING AND CLAMPING Clamping fixtures with controlled and independent positioning: 4 Number of pneumatic clamps: 4 Dodpfx Ajlu E Najflokg Max. number of clamping devices: 8 MACHINE DETAILS Main motor: 6.5 kW Total connected load: 8.3 kW Axis X speed: 100 m/min FEATURES - Multi-piece machining - Tool clamping system - Pendulum mode - Minimum quantity lubrication - Chip conveyor belt - Rigid tapping - Air cooling - Tool holder - Tool magazine with 12 positions at the head - Operator terminal with PC - 23” monitor - 3D visualization for FomCam