Oblikovalec robov (oblikovalec robov)
SCM olimpic k 360

EXW Stalna cena brez DDV

30.500 €

Leto izdelave

2017

Stanje

Rabljeno

Lokacija

Saint-Nicolas-de-Redon Francija

Oblikovalec robov (oblikovalec robov) SCM olimpic k 360

Prikaži karto

Podatki o stroju

Opis stroja:: Oblikovalec robov (oblikovalec robov)

Proizvajalec:: SCM

Model:: olimpic k 360

Leto izdelave:: 2017

Stanje:: dober (rabljeno)

Cena in lokacija

EXW Stalna cena brez DDV

30.500 €

Lokacija:: RUE DES PINS 2, 44460 SAINT NICOLAS DE REDON, France

Klic

Podrobnosti ponudbe

ID ponudbe:: A15333196

Nazadnje posodobljeno:: dne 17.02.2026

Opis

EDGEBANDER WITH DIGITALLY CONTROLLED SETTINGS
WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT
Brand: SCM
Model: K 360 HP-T-ER1 Serial No.: AH/120944
Ref: 123304 Year: 2017

WORKING CAPACITIES:
- Workpiece height: 8 - 58 mm
10 to 45 mm with corner rounding unit in use
- Panel length: 210 to 2500 mm
- Minimum workpiece width: 90 to 1100 mm
- Edge thickness (roll): 0.4 to 3 mm without corner rounding
max 3 mm with corner rounding unit
- Edge thickness (strips): max 6 mm without corner rounding
max 3 mm with corner rounding unit
- Edge width: panel thickness + 2mm each side
- Feed speed: 11 m/min
- Minimum workpiece gap: 600 mm
- Panel overhang (relative to conveyor chain): 30 mm

MACHINE CONFIGURATION:
- StarTouch control
- Prepared for barcode reader
Lhodporx S Ipefx Aacec
- Ø800 mm reel holder
- Front workpiece support extension
- Easy Size: digital positioning of infeed fence and workpiece passage height
- Anti-adhesive spray unit
- Edge trimmer (RT-V) 12,000 rpm
- Infrared panel pre-heating at infeed
- Glue unit (VC-VM) with interchangeable gluepot
for granules, 1 kg capacity. Heat-up time: 12 minutes
Pneumatic pre-cut guillotine
Digitally positioned pressure station with 3 rollers
incl. 1 motorised and timer-controlled roller
- Tilting end trimming unit 0-20°, 12,000 rpm
- Top/bottom flush trimming unit with digital position adjustment
with copying system. 1/4 round (radius 2 mm) or chamfer cutter, 12,000 rpm
- Corner rounding aggregate R2mm, 12,000 rpm with digital positioning
- Top/bottom radius scrapers R1 & R2 mm with digital positioning
- Top/bottom straight scrapers
- Edge finishing spray device (nebuliser)

OTHER SPECIFICATIONS:
- Trimmer motors: 2x2 kW
- End trim motors: 2x0.19 kW
- Height adjustment motor: 0.30 kW
- Feed motor: 1.1 kW
- Flush trimming motors: 2x0.65 kW
- CE marking
- Lockable mains switch, emergency stop buttons
- Main power: 380V, three-phase, 50 Hz
- Pneumatic supply: 8-10 bar max, dry air
- Extraction: 1x Ø100 and 5x Ø80 mm
Spindles: 780 m³/h Trimming 360 m³/h Scrapers 2x360 m³/h

Max. operational floor space: 10.80 x 2.40 m
Transport dimensions (LxWxH): 4.85 x 1.20 x 1.70 m
Weight: 1568 kg

Machine supplied with mounted tools, manual, spare parts list and schematics.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2019

20 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+33 2 99 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Robni lepilni stroj (rezkarji) SCM OLIMPIC K360

Saint-Nicolas-de-Redon

1.305 km

Robni lepilni stroj (rezkarji)
SCMOLIMPIC K360

18.500 €

EXW Stalna cena brez DDV

Klic

Stanje: rabljeno, Leto izdelave: 2016, MACHINING CAPACITIES: - Workpiece (panel) height (thickness): 8 to 60 mm 10 to 45 mm when using the corner rounder - Panel length: >=220 mm - Panel width: 90 to 1100 mm - Feed drive (advancing speed): 11 m/min - Workpiece overhang: mm - Minimum-maximum radius dimensions of panel corners: Ø x mm - Panel overhang with respect to the conveyor belt: - Maximum trimming depth (shapers): mm² - Workpiece spacing: mm Edgebanding using roll stock: - Thickness: 0.4 to 3 mm - Width (height): panel thickness +4 mm - Minimum length: 200 mm Edgebanding using strips: - Maximum thickness: 6 mm Maximum 3 mm with corner rounding unit Width (height): panel thickness +4 mm - Minimum length: 220 mm 280 mm with corner rounder MACHINE CONFIGURATION: - Unwinder table, usable Ø795 mm - Working table: Length 4.15m, Height 91.5 cm With 500 mm front extension - Chain feed conveyor - Anti-adhesive spray system - Edge milling units (2 shapers) 12,000 rpm - Interchangeable glue station, 180-200°C Pneumatic pre-cutting guillotine Pressure station with 3 rollers (1 motorized) - End trimming unit: 2 blades, 12,000 rpm - Top/bottom flush trimming unit with copying shoes - Corner rounding unit - Radius scrapers - Straight scrapers Digital counters for adjustments (Siko type) Lodjx Dcn Nopfx Aacehc OTHER CHARACTERISTICS: - Main power supply: 400V, three-phase, 50Hz, IN 21A - Feed drive motor: 0.75 kW - Milling motors: 2 x 1.5 kW - Saw motors: 2 x 0.19 kW - Finishing (trimming/milling) motors: 2 x 0.55 kW, rpm - Pneumatic supply: 8-10 bar dry air Required working pressure: 6 bar - Dust extraction outlets: 3 x Ø75 mm internal + 2 x Ø50 mm internal + Ø95 mm internal Required airflow: 1600 m³/h - CE marking, lockable main switch, emergency stop buttons Overall dimensions in working order: 4.45 x 1.70 x h.1.80 m Dimensions for transport (L x W x H): 4.25 x 0.90 x h.1.50 m Weight: 1430 kg

Poglej podrobnosti

Mali oglas

Kombinirani skobeljnik z debelino Casadei PFS 520 - sofort verfügbar -

Bitburg

758 km

Kombinirani skobeljnik z debelino
CasadeiPFS 520 - sofort verfügbar -

16.290 €

Stalna cena brez DDV

Klic

Stanje: novo, Leto izdelave: 2025, CASADEI PFS 520 – Surface and Thickness Planer with 520 mm Planing Width and Motorized Thickness Table Adjustment Robust steel and cast iron construction Large, ribbed surfacing tables made of cast iron, stress-relieved to prevent distortion Smooth operation due to high dead weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutterblock, precision mounted Helical gear steel infeed roller for particularly uniform and gentle feeding of wood Outfeed roller with rubber coating Large surfacing fence, tiltable from 90° to 45°, easily readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa Cutterblock System: Planer knife change in seconds When starting the machine, the planer knives are automatically tensioned by centrifugal force – self-locking The knife projection sets itself automatically, no adjustments or screws required The surfacing table is adjusted using a stable and precise parallelogram system, ensuring that the distance between the table edges and the cutterblock remains constant in any position The sturdy aluminum surfacing fence is anodized as standard, easily adjustable and provides a generous support surface Adjustable tilt from 90° to 45° is easily readable from the operator's position Auxiliary fence included as standard for safe planing, even of narrow workpieces Image shows machine with optional equipment The extraction port position remains the same for both surfacing and thickness planing No additional extraction hose or complicated repositioning around the machine is necessary Technical data: Lhodpfjbxz S Hex Aacec Total length of surfacing tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Fence dimensions: 1200 x 190 mm Fence tilt range: 90° – 45° Min./Max. planing height: 3 / 250 mm Cutterblock diameter/number of knives: 100 mm / 4 pcs Feed speed: 5 / 8 / 12 / 18 m/min Spindle speed: 5000 rpm Motor power: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available

Poglej podrobnosti

Mali oglas

Nevers

909 km

Plošča s pesmimi
SCMSCM K360 OLIMPIC

26.000 €

Stalna cena brez DDV

Klic

Mali oglas

Stroj za lepljenje robov s spajanjem Hebrock AKV 3005 DK - F Airtronic

Nattheim

457 km

Stroj za lepljenje robov s spajanjem
HebrockAKV 3005 DK - F Airtronic

Klic

Stanje: rabljeno, Leto izdelave: 2011, pnevmatska nastavitev rezkarja (ravno/radij) Kombinirana rezkarska postaja R=2 Rezkar zaokroževanja robov R= 2 do 40 mm Spojni rezkar do 40 mm Ravno strgalo Profilno strgalo R = 2 Kratki obdelovanci SPS krmiljenje z zaslonom na dotik Pro Face Gnezdenje Hlajenje/antistatično pršenje - airtronic Zaščitno pršenje roba Riepe z vključenim zamenljivim rezervoarjem Debelina obdelovanca 8 - 60 mm Mehanska pritrditev roba Odvzemna odprtina: 140 mm Dimenzije: Dolžina z izpostavo: 4984 mm Globina z valjčno mizo: 1425 mm Največja višina: 1618 mm Višina delovne mize: 888 mm Teža: 1400 kg Lokacija skladišča: Nattheim Lhedpfxjxyiilj Aacoc

Poglej podrobnosti

Mali oglas

Stroj za spiralno vezavo beležnic Swigraph R6

Deepcar

1.437 km

Stroj za spiralno vezavo beležnic
SwigraphR6

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R6, delovna širina: 420 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, skupna masa: 500 kg, vhodni tok: 16 A, priključek za stisnjen zrak: 5 letvica, vhodna frekvenca: 50 Hz, Stroj za oblikovanje in vezavo s spiralami za kovinsko spiralno vezavo knjig. Oblikuje in vstavi žico v predhodno preluknjane beležke in dnevnike. Uporablja navadno ali barvno jekleno žico s premazom iz najlona. Opremljen z oblikovalnimi trni premera 16 mm (na voljo tudi druge velikosti na zahtevo). Razpoložljiv razpon: 6–22 mm. Idealno za beležke in študentske dnevnike. Samodejni izmet z izhodnim trakom. Ljdpfx Ajtltr Sjacehc Proizvodna zmogljivost do 500 kosov na uro. Napajanje: 400 V AC, 1 kW Stisnjen zrak: 5 bar

Poglej podrobnosti

Mali oglas

Tiskalnik DTG BROTHER GTX PRO Bulk Brother GTX PRO Bulk

Bègles

1.220 km

Tiskalnik DTG BROTHER GTX PRO Bulk
BrotherGTX PRO Bulk

9.500 €

Stalna cena brez DDV

Klic

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2021, Brother GTX PRO DTG pisač Godina proizvodnje: 2021 Uređaj u veoma dobrom stanju, proveren od strane profesionalca Broj otisaka: Približno 100.000 Ljdpfxek Rkpne Aacohc Radni sto (support table) uključen Pisač revidiran, očišćen i testiran Uključeno: Oko 40% tinte (2+) Puna posuda rastvora za čišćenje Sa polovnim Brother GTX PRO Bulk dolazi: 5L Premium pre-treata za tamni pamuk, SK Color Dark Cotton; 1L Premium pre-treata za svetli pamuk, LIGHT Cotton by SK Color; 1L tečnosti za čišćenje za Brother GTX i GTX Pro CXS od SK Color; 100 DTF A3 folija; 1 kg Premium DTF praha. Dostava nije uključena u cenu Imamo više GTX Pro Bulk uređaja za prodaju, a cene zavise od broja odštampanih otisaka: Manje od 40K otisaka: 13.500 € Između 40K i 60K otisaka: 12.000 € Između 60K i 80K otisaka: 11.000 € Između 80K i 100K otisaka: 10.250 € Više od 100K otisaka: 9.500 €

Poglej podrobnosti

Mali oglas

Saerbeck

858 km

Obdelovalni center
WeekeBHX 500

45.000 €

Stalna cena brez DDV

Klic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machining Center Manufacturer: Weeke Model: BHX 500 Year of Manufacture: 2008 Lsdpsh E Sghefx Aacjhc Working Range X: 2,500 mm Working Range Y: 1,300 mm Working Range Z: 4 - 80 mm Number of Milling Units: 2 Number of Drilling Units: 2 Vertical Drilling Spindles: 72 Horizontal Drilling Spindles (X): 16 Horizontal Drilling Spindles (Y): 4 Grooving Saw: Swivels 90° X-Axis Speed: 130 m/min Y-Axis Speed: 80 m/min Z1-Axis Speed: 50 m/min Z2-Axis Speed: 27 m/min Spindle Speed: 18,000 rpm Dismantled - immediately available

Poglej podrobnosti

Mali oglas

Stroj za robne trakove SCM Olimpic 500 HT Olimpic 500 HT

Teisendorf

253 km

Stroj za robne trakove
SCM Olimpic 500 HTOlimpic 500 HT

69.500 €

Začetna cena brez DDV

Klic

Stanje: novo, SCM Olimpic 500 HT – Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 – Version "HP T-ER2" - "eye-S" control console (control panel) - Human-Machine Interface software (HMI) "Maestro active edge" - Fine milling and radius scraper unit, radius = 1 mm - Fine milling and radius scraper unit, radius = 2 mm - Electronic positioning of the upper pressure beam - Spacer at the infeed fence - "SAVENERGY" kit - Interior lighting for the cabin and gluing area - "Nesting" tracing rollers - Separator agent spraying unit "AAR" 1 - Edge finishing spray device - Spray device for delicate edges - Jointing unit "RT-V1" - "EASY SIZE" device - Glue application unit "VC-VM" - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - End trimming unit "K-2 Radius" - Chamfer and radius milling unit "R-HP Multiedge 2R" Lhedpfewkf Ihex Aacsc - Corner rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE 3 kit: 3 automatic settings straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Surface scraper "RC-N" - Buffing unit "SP-V" The machine is new and still in its original packaging. Special offer demonstration machine at a discounted price.

Poglej podrobnosti

Mali oglas

Stroj za robno lepljenje Brandt Highflex 1440

Grońsko

704 km

Stroj za robno lepljenje
BrandtHighflex 1440

19.400 €

Stalna cena brez DDV

Klic

Stanje: dober (rabljeno), BRANDT highflex 1440 Edge Banding Machine Well-equipped, available for inspection prior to purchase. - Pre-milling cutters - Glue application unit - Pneumatic pre-cutting guillotine - Pressure rollers - Trim saws for precise end cutting - Top and bottom milling unit (pre-milling) - 2x multifunctional finishing milling units - Profile scraper - Flat scraper - Polishing unit The machine is equipped with NC cutter control and a pneumatic package. - Max workpiece height: 60 mm - Max edge band thickness (roll): 3 mm - Max feed speed: 14 m/min Lhedpfxst Hxxpj Aacjc The machine is well-maintained and in very good condition.

Poglej podrobnosti

Mali oglas