Stroj za pihanje plastike SIDEL

Sidel SBO 6

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SBO 6/10, Sidel stretch blow molding machine Max. output: 6,000 bottles/hour Max. bottle size: 3,000 cc Blow stations: 6 The machine is in very good and well-maintained condition. GENERAL INFORMATION The SBO 6/10 features 6 cavities and 10 heating modules. Operates with a variety of bottle sizes and designs from 0.25 to 3 liters. Two-stage PET stretch blow molding machines from Sidel require pre-manufactured preforms to be fed into the machine. Separating the processes for producing bottles and preforms allows for production optimization, greater operational flexibility, and provides a higher production capacity and yield. MAXIMUM PREFORM DIMENSIONS Neck height: 9 – 41 mm (measured from bottom of support ring) Minimum ID of neck: 19 mm Maximum OD of neck: 34 mm Preform support ring diameter: 29 – 51 mm Maximum preform length: 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter: 130 mm Maximum bottle height: 380 mm Bottle capacity: 0.25 – 3 liters TYPICAL PREFORM WEIGHTS (for still and carbonated liquids) 0.25 liter bottle: 14-20 grams 0.50 liter bottle: 20-33 grams 1.00 liter bottle: 26-40 grams 1.50 liter bottle: 35-51 grams 2.00 liter bottle: 44-58 grams 3.00 liter bottle: 68-84 grams BLOW WHEEL Height: 3.5 meters Number of cavities: 6 Clamping force: 10 tons Item height (below neck) at discharge: approx. 1.4 meters Machine DC drive motor power: 4 kW HEATING UNIT Height: 2 meters Number of oven heaters: 10 Number of heating zones per module: 8 Maximum power: 170 kW ELECTRICAL REQUIREMENTS Maximum supplied power: 200 kW Gedpfxeg Ailcs Aa Rjbw Average consumption: 100–150 kWh (varies with bottle produced) COMPRESSED AIR Available supply pressure: 7–35 bar Operating pressure: 7 bar Flow rate: 50–100 Nm3/h (varies with bottle produced) Blow pressure – Standard base: up to 25 bar Blow throughput – Standard base: 110–550 Nm3/h Blow pressure – Petaloid base: up to 35 bar Blow throughput – Petaloid base: 155–770 Nm3/h CHILLED WATER Temperature: 10–12°C Pressure: 5–6 bar Flow rate: up to 6 m3/h Heat dissipation: up to 16,000 kcal/h WEIGHT Blow wheel with molds: 8 tons Heating unit: 2.2 tons Preform feeder: 0.65 tons Control cabinet: 0.85 tons PREFORM HEATING UNIT The preforms are transported with the necks facing upward to the heating unit. This module ensures that preforms are rotated before passing neck-down in front of the heating elements, and again afterward. During the heating phase, the preforms are rotated and the necks are shielded from heat to optimize thermal distribution without distorting the neck. Heating is performed via 10 heating modules. Each module can accommodate up to 8 horizontally-stacked IR lamps, with air-cooled ends. The heating output of the 8 zones—matching the 8 lamp rows—is adjustable to optimize the temperature profile. These zones are regulated across all SBO models. After heating, an IR camera monitors preform temperature, enabling automatic adjustment of the controlled zones to maintain the required temperature at all times.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, višina izdelka (maks.): 380 mm, premer obdelovanca (maks.): 130 mm, proizvodna zmogljivost: 7.200 enota/h, TECHNICAL DETAILS Number of moulds: 6 Capacity for standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg 415V / 380V transformer dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeding dimensions: 2,000 x 2,500 mm Preform feeding weight: 250 kg Feeding guides length: 2,000 mm Power supply Total power: 142 kW Main connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12 °C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT 415V / 380V transformer Preform hopper and conveyor Preform feeding Feeding guides Adaptation to other voltages possible Gbjdpex A Uu Ejfx Aa Rsw