HIDRAVLIČNA STISKALNICA VISOKE NATANČNOSTI

SHOEN TYP 6400

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Ijdpfx Aofg E Hlsdkohw Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 16,92 kW (23,00 KM), vrsta goriva: bencin, vrsta prenosa: hidrostat, Leto izdelave: 2024, obratovalne ure: 75 h, Agria 5900 Taifun Professional Hydrostatic Implement Carrier Technical Specifications: - Kawasaki 2-cylinder, 4-stroke petrol engine, 23 HP, with electric start Ihsdev Ecdkspfx Adkew - Transmission: Infinitely variable hydrostatic drive with single-plate dry clutch - Speeds: Forward: 0–7 km/h, Reverse: 0–3.6 km/h - Handlebar: Rubber-mounted, tool-free adjustment for height and lateral position - Steering: Power steering (Handlebar-Active Steering) - Tyres: 23 x 8.50 - 12 AS - Standard equipment includes: tyres, service and parking brake, hour meter, manual and electric starter, power socket - Fuel: Unleaded petrol - Weight: approx. 221 kg Features: - Intuitive steering with minimal effort thanks to Handlebar-Active Steering - Patented easy-control operating unit for intuitive command - Powerful professional-grade engines guarantee ample power for all attachments - Portal axle for shifting the centre of gravity based on local site conditions and attachment used - High visibility even in poor lighting, thanks to LED safety lights - Standard support leg enables the machine to be parked comfortably without an attachment - Hydraulic safety valve for secure hold even on steep slopes - Optimised air intake reduces ingress of dirt and dust - Central parking brake - Infinitely variable hydrostatic drive enables optimal adaptation of working speed - Robust and low-maintenance construction for continuous use under toughest conditions - Hour meter as standard - Agria attachment flange for positive, secure connection between base unit and attachment - Robust engine options ensure efficient work, even with professional attachments - Freewheeling function allows easy machine movement without engine running Possible Attachments: - Turf maintenance: mowing, mulching, baling, band rake - Soil preparation: reverse rotary tillers, harrows - Grounds and path maintenance: weed removal, snowploughing, snow blowing, sand/salt spreading, sweeping - Woodland maintenance: brushwood chipping This Agria 5900 Cyclone Hydro implement carrier was built in 2024, has approx. 75 operating hours, and has been used as a demonstration unit only. The Cyclone is in like-new overall condition, with only minor signs of use and is immediately ready for operation. Sale occurs as a used machine under exclusion of return, warranty, and guarantee. Net price €18,479 // Gross price €21,990 - Viewing / test drive welcome - Nationwide shipping via freight forwarder: €180 - Financing / leasing can be tailored to your needs!

Leto izdelave: 1990, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 647-230, Hamba Punching Machine for Lids (Deckelstanzmaschine) without Tooling Model 647-230 Film width: 230 mm Ihjdpfx Aenr Ex Tjdkew Very good condition Made in Germany - Supplied with used embossing calender for worm-structure texture - Power supply: 220/380V – three-phase - Additional punching tools available, e.g.: 2x double-punch tool – diameter 75.50 mm 1x double-punch tool – diameter 59.54 mm 1x double-punch tool – diameter 80.50 mm 1x double-punch tool – diameter 93.80 x 120.90 mm

Stanje: rabljeno, Rezalnik Proizvajalec: Seydelmann Model: K 204 Ultra Iz nerjavnega jekla Prostornina: 200 litrov 2 hitrosti nožev 2 hitrosti kotla Ihodpjtu I T Eefx Adkew 2 hitrosti mešanja Dimenzije: 280x205x255 cm Električna moč: 78 kW Napetost: 400 V, 3 faze, 50 Hz

Stanje: novo, Leto izdelave: 2026, CIDAN Machinery manufactures slitting and cut-to-length lines that can be programmed and operated by both skilled and unskilled users. Our cut-to-length lines are all-in-one systems designed to withstand high production volumes over time while occupying minimal floor space. CIDAN Machinery offers many of its state-of-the-art features as standard – straightening units, sheet guides for precise feeding, guillotine shears with hold-down devices and double-edged blades, feed units, foot pedals for remote operation, and much more. To provide the absolute best technological solutions for coil processing worldwide, Forstner – the globally leading brand for slitting and cut-to-length lines since 1960 – is now also part of the CIDAN Machinery Group. - Processing sheet metal from coil saves money, reduces scrap, and frees up warehouse space. - We have the right solution for any production scale! Isdpfxjmfrgre Adkjhw - Coil processing lets you streamline operations, boost productivity, and increase your profits! - The extensive Forstner portfolio can be flexibly combined into a highly efficient production line tailored to your requirements. Key parameters such as system performance, material removal, and time required to access material are crucial for fast and cost-effective production. - With our solutions, you can easily process coils from 500 kg up to 8 tons. Larger coils mean fewer changeovers, less waste, and a more efficient processing workflow. - Need quick and flexible access to a wide range of materials without time-consuming changeovers? With a multi-mandrel decoiler you have up to eight different materials available at any time, and changing from one coil to another is considerably faster. - With one of our fully-featured slitting and cut-to-length lines, there is no longer any need to cut sheet strips separately with a guillotine shear. - Whether you sell cut-to-size sheets or rewind from large to smaller coils – we have the right solution for you! - Efficient coil handling shortens lead times, increases production floor space, and reduces capital tied up in inventory.

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feed rollers: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Ihodpfxocxxx Rs Adkow Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition

Stanje: rabljeno, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL type AZP Curtainsider low-loader, low-loader trailer, low-loader for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Curb weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Load height under the curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear swing doors at sideboard height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (usable even with the curtain frame removed and the curtain moved forward) - Spare wheel mounted on the front wall - Separate raising and lowering of front and rear axles Ihjdpfx Adet N Antekjw - Middle axle as lift axle - Drawbar – extendable in several stages - Very sturdy lashing rings on the outer frame and in the centre of the vehicle - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The vehicle was purchased as a new vehicle by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Stanje: dober (rabljeno), Leto izdelave: 2003, potovalna razdalja osi X: 13.000 mm, pomik osi Y: 4.500 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 30.000 obr/min, razdalja med stojali: 6.500 mm, nos vretena: HSK A63, X-axis: 13,000 mm Isdpfjtt I Sfex Adkjhw Y-axis: 4,500 mm Z-axis: 1,000 mm Distance between columns: 6,500 mm C-axis: 190º A-axis: 110º Rapid traverse XYZ: 15,000 mm/min Rapid traverse AC: 10 rpm CNC control: Siemens 840D Spindle mount: HSK A63 Spindle speed: 30,000 rpm Spindle power: 20 kW Tool changer: 20 positions Torrestool tables: 16 units X-axis: 11,500 mm Y-axis: 3,500 mm Z-axis: 750 mm Country of origin: Spain Machine dimensions (L x W x H): 19,000 x 11,000 x 6,770 mm Machine weight: 70,000 kg The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed for machining aeronautical materials (composite, aluminum, titanium, steel, etc.). The Torresmill Gantry combines perfectly with the Torrestool universal clamping system, ensuring flexibility and reduced cycle times.

Leto izdelave: 2006, stanje: generalkompletno obnovljen (rabljeno), HYDRAULISCHE PRESSE MECAMAQ PRESSKRAFT: 350 t HUB: 350 mm TISCHVERFAHRWEG LINKS-RECHTS: 600 mm TISCHVERFAHRWEG VORNE-HINTEN: 750 mm ANTRIEBSLEISTUNG: 15 kW Abmessungen: Höhe: 2,9 m Breite: 1,9 m Iodpfx Aefmqqlsdkehw Länge: 1,3 m Gewicht: 5.700 kg

Stanje: novo, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1,200 kg Dimensions (LxWxH): Length 2,400 mm, Width/Depth 2,160 mm, Height 2,300 mm Spindle speed: 60–4,200 rpm - Heavy-duty design made from high-quality Meehanite cast iron - High rotational accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill - Stepless speed control - Forward/reverse operation for thread cutting - X and Z axes with adjustable 55° dovetail guideways - Y-axis with flat guideway - Drilling-milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step (0.04 – 0.15 mm/rev) - Motorized feed in X, Y, and Z axes - Precision microfeed - Milling spindle with precision bearings - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant groove - Centralized lubrication - Height-adjustable safety shield with microswitch for optimal operator protection from flying chips and parts - Robust and large cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity: 300 kg - Large travel distance: X / Y / Z axis 740 mm / 330 mm / 320 mm Dimensions and weights Length: 2,400 mm Width/Depth: 2,160 mm Height: 2,300 mm Weight: 1,200 kg Drilling and milling capacity Max. face mill diameter: 76 mm Max. shank cutter diameter: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical connection Total connected load: 3 kW Supply voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Horizontal table Length: 254 mm Width: 1,370 mm Max. vertical spindle-table distance: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal spindle Overhang: 0–420 mm Coolant system Coolant pump drive power: 90 W Motor(s) Vertical spindle normal operating power: 2.2 kW Standards and approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical spindle Overhang: 0–420 mm Spindle mount: ISO 40 DIN 2080 Speed range: 60–4,200 rpm Number of speed ranges: 2 Ieded H Hhzopfx Adkohw Speed regulation control: mechanically stepless Swivel range milling head X-Y plane: 90° Swivel range milling head Z-X plane: 45° Quill diameter: 86 mm Quill stroke: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head travel Z-axis: 470 mm VPE: 1