Zadnja stružnica

WMW DH 250III x630

Stanje: rabljeno, Leto izdelave: 1979, Technical details: Swing diameter over bed: 540 mm Turning length: 630 mm Distance between centers: 900 mm Bsdpfxevbhv Re Afqolr Center height over bed: 270 mm Center height over rear slide: 138 mm Swing diameter over rear slide: 250 mm Longitudinal travel: 700 mm Cross travel: 80 / 75 mm Spindle speeds: 1.8 - 450 rpm (8x stepless) Clamping diameter: 26 mm Feed range x-axis: 12 steps / 0.063 - 0.63 mm/rev Feed range y-axis: 36 steps / 0.070 - 1.11 mm/rev Tailstock quill: MT5 Tailstock quill travel: 250 mm Total power requirement: 7.0 kW Machine weight approx.: 3.76 t Dimensions (LxWxH) approx.: 3.2 x 1.2 x 1.8 m Application: Primarily for back turning and relief grinding of cutting tools (especially hobbing cutters, with or without thread pitch). Back turning and relief grinding possible from the front, the rear, and along the machine axis. Main drive via 8-step manual gearbox. Feed gearbox designed as a 12-step manual gearbox. Swivel range of the rear slide = 360°; Swivel range of the cross slide = 360°. Chuck is a taper disk Ø 200mm with MT5. Equipment: Mandrel Ø 49.5 x 400mm ARBAH-L 3+1 measuring system FRENIC 5000G11 frequency inverter 3-jaw chuck Ø 250 mm in good condition.

Stanje: rabljeno, Leto izdelave: 1979, X-hod 800 mm Y-hod 300 mm Z-hod 400 mm Bljdpfewwwqhsx Afqjr Območje vrtljajev 25 - 2.000 min^-1 Pogonska moč 4 kW Pomik 5 - 500 mm/min Hitri pomik 1,5 m/min Delovna miza: 1.000 x 700 mm Vpenjalni stožec SK40 Teža 1,8 t Prostorske zahteve cca 2,50 x 2,40 x 2,00 m Stroj je v dobrem stanju Digitalni prikaz je pokvarjen (merilni trakovi delujejo) Izmenljiva rezkalna glava Brez dodatne opreme

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 290 mm, Year of manufacture: 1986 Travel distances: X = 300 mm Y = 160 mm Z = 290 mm Equipment: - Standard accessories - Vertical milling head, ISO 40/ 20x2 - Fixed angle table 210 x 600 mm, NEW! - Retrofitted safety guard for milling spindle, electrically interlocked, NEW! - 3-axis active digital readout (TNC113) - Coolant system - Machine lamp - Machine feet - Documentation Condition: Good, mechanics and control system workshop-tested Bledpfjwgafyex Afqor

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, The HURON NU-4 is equipped with various buttons, switches, and levers to control its operation. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle/table distance: 9-509 mm spindle head - swivelling: 360° spindle taper: SK 40 spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm Bedpfsriulgjx Afqelr rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 HP machine weight approx.: 3.1 t machine dimensions approx.: 2.36 x 1.65 x 1.45 m (W x H x D)

Stanje: rabljeno, Leto izdelave: 2008, Article: Vertical Turning and Grinding Center Brand: EMAG Model: VSC 250 DS Year of Manufacture: 2008 Control: SIEMENS 840D Bodpfxjia Rtds Afqolr Grinding Spindle Speed: 30,000 rpm Turning Spindle Speed: 3,000 rpm Turret Tool Stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling system Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled by a spindle repair shop. Otherwise, the machine is in very good condition and fully operational. Please contact us for further information and pictures via mail(at) or

Leto izdelave: 1990, Stanje: dober (rabljeno), številka stroja/vozila: 92041, Table clamping surface: 410 x 900 mm Travel paths (X/Y/Z): 560 / 410 / 380 mm Spindle taper: SK 40 Spindle speeds: 22 - 6000 rpm Feed rates: X and Z up to 10,000 mm/min, Y up to 240 mm/min Required space: 2,600 x 2,000 x 2,300 mm Weight: 3,500 kg Bledsdhhprepfx Afqer

Stanje: rabljeno, Leto izdelave: 1968, Faceplate diameter 1000 mm Swing over support 1200 mm Centre distance 1500 mm Bed recess . Machine weight approx. 6 t Bljdjwhqzzspfx Afqor

Stanje: dober (rabljeno), Leto izdelave: 1986, 1 used universal cylindrical grinding machine Model: SA 5 /630 Year of manufacture: 1986 Blsdsul Agbepfx Afqjr Centre height: 140 mm Swing over bed: 280 mm Centre distance: 630 mm Table speed: 0.05 - 6 m/min Coolant system Weight: 4.5 t Technical data subject to change/errors excepted.

Stanje: rabljeno, Leto izdelave: 1987, Lead and Feed Screw Lathe Manufacturer: Boehringer Model: DUE 560 Year of manufacture: 1987 Used Technical specifications: Turning diameter: 250 mm Turning length approx.: 1200 mm Swing over bed: 560 mm Swing over cross slide: 365 mm Max. workpiece between centers: 500-800 kg Bljdpfx Afstud S Ujqjr Spindle diameter in front bearing: 100 mm Spindle bore: 62 mm Spindle nose: DIN 55022 No. 8 Travels Cross slide travel: 345 mm Top slide travel: 125 mm Tailstock/quill diameter: 80 mm Tailstock taper: MT 5 Quill stroke: 190 mm Longitudinal feed: 60x0.0315-28 mm/rev Cross feeds: 60 x 0.016-14 mm/rev Thread pitch capability: 0.125-112 mm Total connected load: 20 kW Space requirement approx. 3.5 x 2.0 x 2.2 m Weight: approx. 2.5 t

Stanje: rabljeno, Leto izdelave: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Control: Fanuc 18iM Super Cap II Spindle speed: 60-6000 rpm Tool magazine: 60 positions Tool holder: BT50 Total power requirement: 26 kW Machine weight approx. 23.6 t Space requirement approx. 6.3 x 3.3 x 3.8 m Blodpfx Aferw Dknsqor The machine will be available for loading from 03/2024! Description X-axis: 2050 mm, Y-axis: 1100 mm, Z-axis: 800 mm, spindle speed: 60-6000 rpm, Number of tool stations: 60, tool magazine: BT 50, drive power: 22/26 kW, Grid size: 250 mm, control: FANUC 18iM Super CAP II with 10.4-inch display, Length: 6250 mm, width: 3300 mm, height: 3800 mm, weight: 25 t, equipped with High Precision Contour Control, Central lubrication system upgraded (2005), axes (X-Y-Z) upgraded to linear scales (0.001), Memory expansion 128 Kbyte, tool correction memory (200 pcs.), High Speed Remote Buffer, Extraction via HEPA filter system, upgraded to high-pressure internal coolant supply 20 bar and zero-point clamping system with 16 chucks each.