Kotni obdelovalni center za okna

SCM WINDOR 100

Stanje: dober (rabljeno), Weinig Hydromat H23 50 mm vretena, 6.000 obr./min Spodní frézka připravena, 15 kW Pravá frézka připravena, 11 kW Levá frézka připravena, 11 kW Pravá frézka připravena, 11 kW Levá frézka připravena, 11 kW Horní frézka připravena, 15 kW Spodní frézka připravena (rovinná frézka), 11 kW + ložisko na konci hřídele Horní frézka připravena (rovinná frézka), 11 kW + ložisko na konci hřídele Fpodpfewmw Nvsx Af Ssf Spodní frézka připravena, 15 kW Možnost dodatečného osazení dalšími rovinnými nebo profilovými frézami dle potřeby! Motor posuvu 15 kW Automatický mazací systém Možnost dodání vstupního a výstupního dopravníku k hoblovce dle potřeby. Možnost nabídky nástrojů dle požadavku.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1991, Torwegge multi-blade saw Chain width: 250 mm Cutting height: 100 mm Fedpfxeucnuks Af Sepf Total connected load: 39 kW

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna masa: 330 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 34 l, barva: črn, Izhodni tok: 65 A, izhodna napetost: 230 V, izhodna frekvenca: 50 Hz, nazivna moč: 12 kW (16,32 KM), neprekinjena moč: 10 kW (13,60 KM), skupna dolžina: 930 mm, skupna širina: 660 mm, skupna višina: 900 mm, največja hitrost vrtenja: 3.000 obr/min, vrsta hlajenja: voda,

Stanje: rabljeno, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for individual parts with rinsing circuit. ----- Functional features: Machine for horizontal flooding of individual workpieces. The product is applied by a row of nozzles. Excess product is then blown off by air nozzles. The pump and air nozzles are automatically controlled and only operate when a workpiece passes through. This helps to reduce compressed air consumption. The recirculation mode ensures minimal product consumption. ----- Construction features: Structure Robust steel frame, coated with high-strength, water-soluble paint. Machine body made of hot-sealed, thick polypropylene panels. Four independent chambers for entry, flooding, air-blow, and exit. Fjdpfx Afonl Nqqs Sspf Horizontal feed of workpieces By means of motor-driven plastic rollers with grooves. Electronic frequency inverter for controlling and varying feed speed. Transmission The machine is fitted with an exclusive system whereby all gear mechanisms are located outside the flooding chamber and are easily accessible for the operator, guaranteeing longer operational life and facilitating maintenance. Moving parts are protected by cover plates and appropriate seals. Recirculation pump Pneumatic double-diaphragm pump with valves, seals, and diaphragms made from nitrile rubber, and a housing made of plastic material (PVDF). Air nozzles A blow-off system is installed in the first chamber to prevent product from escaping. A second blow-off system after the flooding chamber removes excess product from the workpiece. Electrical control panel According to CE, protection class IP 55. Includes inverter for adjusting feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3-6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between entry and exit rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be flooded mm 250 Max. width of workpieces to be flooded mm 300 Max. height of workpieces to be flooded mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinsing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical data according to manufacturer – without guarantee! Illustrations may differ from original. Prices net, plus VAT (domestic))

Stanje: novo, Leto izdelave: 2026, Construction size: 5 Nominal heat output: 145 kW -- Complies with BImSchV Stage 2 and CE standards -- Combustion chamber fully lined with refractory material For rooms up to: 3,800 m³ (according to DIN) Fuel types: Firewood, chipboard, wood chips, briquetted wood chips Fuel consumption: 35 - 40 kg/h Fpedpfx Ajdlhcref Ssf Fan air output (free-blowing): 9,400 m³/h Air outlet opening: Ø 700 mm Flue connection: Ø 220 mm Weight: 1,950 kg SPS control cabinet: 380 Volt

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement Fpedpfxsvu Hgbo Af Sef - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: rabljeno, številka stroja/vozila: 008381, Delovno območje os X: 4250 mm Delovno območje os Y: 2280 mm Delovna površina: nesting miza Fjdpfx Afsx Swc Hj Sepf Moč glavnega vretena: 12 kW Št. krmiljenih osi: 5 osi Št. vrtalnih vreten: 11 Št. mest za orodja: 24

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Fpjdpfxjwyda Us Af Ssf Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Tenoning and Milling Machine SCM Flex 1 Spindle diameter: 40 mm Fpsdpfjwtf Adsx Af Sof Total spindle height: 200 mm Two-speed motor: 6.6/8 kW Variable spindle speeds via belt: 3250/6500 and 5000/10000 rpm Electric spindle height adjustment Maximum cutter diameter: 270 mm Cutting saw unit: 2.2 kW Automatic side carriage Pneumatic material clamps Four-roller power feed

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Drying chamber Manufacturer: Mühlböck Model: ZLSM Fedpfx Ajwr Tzfsf Sopf Year of manufacture: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans, each 3 kW 10 measurement points With frequency converter With control system Heating capacity: 223 kW Water temperature: 85 °C Water throughput: 14 m³/h Voltage: 230/400 Volt Connected load: 12 kW Fans: 3 x 3 kW Control system: MB Intellevent 5000 program