Vrtljiva rezkalna glava

SCM T 150 Class

Stanje: rabljeno, Leto izdelave: 1994, Motor 6 / 7,5 kW s 4-valjnim podajalnikom, fiksne podajalne hitrosti. Razširitve hitrosti. Višina delovne mize: 920 mm. Nagib vretena: -10° do +45°. Največji izteg vretena nad mizo: 175 mm. Hitrosti vretena: 3250/6500-5000/10000 obr/min. Največji premer orodja: 250 mm. Teža: ca. 950 kg. Lokacija skladišča: Nattheim. Njdsw Enw Ispfx Anpelf

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 53.788 km, moč: 132 kW (179,47 KM), prva registracija: 01/2019, vrsta goriva: dizel, gorivo: dizel, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, Leto izdelave: 2019, obratovalne ure: 2.689 h, Oprema: AdBlue, žerjav, = Dodatne možnosti in oprema = - PTO (odvzem moči) = Dodatne informacije = Teže Lastna teža: 7.285 kg Nosilnost: 205 kg Skupna dovoljena masa: 7.490 kg Funkcionalnost Dvigalo: teleskopsko Dolžina dvigala: 37 m Dvižna zmogljivost: 4.000 kg Znamka nadgradnje: BOCKER AK37/400 MONTAŽNA DVIGALA/STREŠNA DVIGALA/DVIGALO/GRUA CE-oznaka: da Stanje Tehnično stanje: zelo dobro Optično stanje: zelo dobro MANN TGL 7.190 4X2 BB + BÖCKER AK37.4000 DVIGALO + JIB EURO 6 190KM POGON 4X2 BB POVIŠANO MEDOSNA RAZDALJA 390CM LE 53.788 KM !!! ROČNI MENJALNIK OMARICE ZA ORODJE Nsdoyit Rtopfx Anpslf BÖCKER AK37.4000 DVIGALO 4 X PODPRTO DALJINSKO UPRAVLJANJE MAKSIMALNA DELOVNA VIŠINA 37 METROV MAKS. DVIŽNA KAPACITETA 4000KG CE CERTIFIKAT NEMŠKA REGISTRACIJA SLEDITE NAM TUDI NA INSTAGRAMU: GEURTSTRUCKS GOVORIMO NEMŠKO HABLAMOS ESPAÑOL GOVORIMO ANGLEŠKO

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, številka stroja/vozila: AB /139622, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, vrtilni razpon: 56 °, največja hitrost vrtenja: 10.000 obr/min, vrtljajska hitrost (min.): 3.300 obr/min, Oprema: CE označba, vrtilna hitrost brezstopenjsko nastavljiva, Ponujamo to dobro ohranjeno mizno rezkalnico SCM T 150 Class, letnik 2000. Opis: Mizna rezkalnica, krmiljena v 3 oseh, z 999 programskimi mesti (višina vretena, prislon, nagib vretena, obrati). Nagib vretena: -10° do +46°. Inverterski motor, nastavljivo število vrtljajev vretena 3300–10000 obr/min. Podaljšek mize spredaj in zadaj. Prislon se lahko zavrti vstran. Reža med rezkalnikom in mizo nastavljiva. Zelo dobro stanje, rahle sledi uporabe. Vključno s priborom: ° 5 dodatnih vreten SK40 za hitro menjavo ° Okrogla prislonska letev ° Podajalnik s stojalom ° Različno ročno orodje Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite. Nlsdpfsy Ir Ezox Anpsf

Stanje: rabljeno, Leto izdelave: 1994, Used, top condition, high-end equipment, extensive accessories with 3-axis control, pneumatic spindle change, electronic adjustment of the milling fence 99 memory programs, 15 interchangeable spindles, adjustable table insert Make: SCM Nlsdpfxjythdvo Anpsf Model: T150 Class Year of manufacture: 1994 Upgraded motor 6 / 7.5 kW Tiltable from -10° to +45° Motor brake Motor with 2 speeds / pole-changing Speed ranges: 3250/5000/6500/10,000 rpm Right and left rotation Table size: 2700 x 700 mm Spindle diameter: 15 x 30 mm / 1 x 40 mm Spindle mount: HSK Quick-change spindle system SK / HSK Table extension: 2 x 650 mm Extendable frame support Aluminium fence jaws Milling fence with fine adjustment Digital displays for milling fence – diameter – cutting depth – jaw offset Guard and pressure device Control panel on top Swiveling control panel - electric height adjustment - electric swivel adjustment - electric milling fence Positioning control for 3 axes: height / swivel / milling fence with 99 programs Digital displays for swivel angle – spindle height – fence depth Swing-away device for the milling fence Socket for feed unit Original price approx. 40,000 – 45,000 EUR Extraction port: 120 x 120 mm Space requirement approx. 2700 x 1300 x 1800 mm Weight approx. 1073 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, function tested without refurbishment, without guarantee or warranty

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2198535, skupna masa: 2.409 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 600 l, barva: rdeča, moč: 160 kW (217,54 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 160 kW (217,54 KM), nazivna (navidezna) moč: 220 kVA, neprekinjena moč: 160 kW (217,54 KM), neprekinjena (navidezna) moč: 220 kVA, skupna dolžina: 3.300 mm, skupna širina: 1.200 mm, skupna višina: 1.970 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: FPT/Iveco, vrsta hlajenja: voda, poraba goriva (kombinirana): 42,1 l/100 km, poraba goriva (mestna vožnja): 24 l/100 km, poraba goriva (izven mesta): 32,87 l/100 km, gorivo: dizel, kapaciteta rezervoarja za gorivo: 600 l, kapaciteta baterije: 100 Ah, napetost baterije: 12 V, vhodna napetost: 12 V, vhodna frekvenca: 50 Hz, vhodni tok: 32 A, obratovalna temperatura: 25 °C, temperatura okolja (min.): −25 °C, okoljska temperatura (maks.): 45 °C, višina krmilne omare: 1.970 mm, dolžina elektro omare: 3.300 mm, širina krmilne omare: 1.200 mm, vrsta zaščite (IP koda): IP65, vrtljajska hitrost (min.): 1.500 obr/min, temperatura: 25 °C, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, mobilni rezervoar za dizel, The Bredenoord 200 KVA generator is a reliable and versatile solution for temporary and long-term power requirements in a wide range of environments. This genset is ideal for mobile use and complies with Stage V emission standards. The efficient FPT/Iveco engine, combined with a Stamford generator, delivers outstanding performance with low operating costs. The generator is housed in a sound-insulated enclosure that ensures minimal noise emissions, making it perfect for use in noise-sensitive environments (super silent). The enclosure features thick, oil-resistant sound insulation and external sockets with circuit breakers for added safety. With a 600-litre fuel tank, the generator offers an autonomy of up to 14 hours under continuous load. The system operates on diesel, HVO or GTL fuel, providing flexible fuel options. Technical Specifications: - Model: Bredenoord 200 KVA - Nominal Power: 220 KVA - Maximum Power: 220 KVA - Engine: FPT/Iveco NEF67TM7 - Generator: Stamford brushless alternator (AVR) Nljdpfxowf Nkce Anpjf - Output: 220 KVA - Voltage: 230/400 V, 50 Hz - Speed: 1500 rpm - Noise level: 68 dB(A) at 7 metres - Fuel tank: 600 litres - Autonomy: - 100% PRP: 14 hours - 70% PRP: 18 hours - Engine power: 160 KW - Battery charger and engine pre-heater: Standard - Control panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 3.30 m x 1.20 m x 1.97 m - Weight: 2409 kg - Emission class: Stage V Fuel consumption: - 100% PRP: 42.1 L/h - 70% PRP: 32.87 L/h - 50% PRP: 24 L/h Options: - Engine pre-heater - Battery charger - 3-way fuel valve - XXL fuel tank Sound attenuation: The generator is designed with optimised air intakes and special insulation materials to minimise noise. The sound insulation is reinforced with wool of varying thickness to dampen sound across a wide frequency spectrum, making it ideal for use in noise-sensitive areas. Durability: The enclosure is corrosion-resistant thanks to a coating tested for more than 2000 hours (C5I-H), guaranteeing a long service life even in the most challenging conditions. Safety: The generator is equipped with reinforced locks and stainless steel hinges. The doors are designed with a 20-degree bevel to prevent water accumulation and minimise oxidation. Transport and Handling: The generator is easy to move thanks to reinforced lifting eyes and steel beams, ensuring straightforward transport on construction sites. The design provides a stable and secure relocation without risk of damage. Customisation: The Bredenoord 200 KVA generator is available in various outputs from 20 KVA to 600 KVA. Customer-specific adaptations are possible, allowing the generator to be tailored to specific requirements and applications. Certifications: - CE certified - Made in Europe Fields of Application: The generator is suitable for various sectors, including construction, industry and other areas where reliable and efficient power supply is required.

Stanje: rabljeno, Leto izdelave: 2005, moč: 7,5 kW (10,20 KM), največja višina reza: 170 mm, največja širina rezanja: 1.100 mm, premer žaginega lista: 500 mm, nastavitev nagiba žaginega lista: 46 °, vrsta nastavitve višine: hidravlični, izvrtina žagine plošče: 30 mm, največja hitrost vrtenja: 5.500 obr/min, vrtljajska hitrost (min.): 2.800 obr/min, skupna dolžina: 3.300 mm, skupna širina: 2.000 mm, skupna višina: 1.800 mm, skupna masa: 1.500 kg, Oprema: CE označba, No. 04528 Sliding Table Panel Saw Martin T 73 BASIC Used, Year of Manufacture: 2005 Sliding table: 3000 mm Maximum cutting height: 170 mm Maximum saw blade diameter: 500 mm Saw blade bore: 30 mm Cutting width: 1100 mm Motor: 7.5 kW Speeds: 2800 / 4000 / 5500 rpm Hydraulic saw blade tilting: 0° - 46° Hydraulic cutting height adjustment Lowerable rip fence Pneumatic saw shaft lock Crosscut table with fixed angle settings Length stop extendable up to 3300 mm Sliding table with infinitely variable locking Integrated contact for extraction system activation Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm (LxWxH) Weight approx. 1500 kg To avoid possible misunderstandings, on-site inspection after prior arrangement is possible and recommended. Sale in as-is condition. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: 'sold as seen.' Nsdoyymtdepfx Anpolf Payment terms: Prices plus statutory VAT, payment before collection or shipping. Delivery terms: ex stock.

Leto izdelave: 1987, stanje: rabljeno, številka stroja/vozila: 687 T, Working width: 3050 mm Sheet thickness: 6 mm Throat depth: 200 mm Back gauge: 1000 mm Nodpfjb N Erbsx Anpolf Drive power: 15 kW Required space: 4100 x 2300 x 2100 mm Weight: 8500 kg

Stanje: rabljeno, Leto izdelave: 1993, Technical details: Saw blade diameter: 250 mm Saw blade bore: 30 mm Cutting depth: 68 mm Cutting length: 450 mm Total power requirement: 2.55 kW Machine weight approx.: 150 kg Dimensions (L x W x H): 0.85 x 0.86 x 1.4 m Nledpou Nifyefx Anpjf This circular saw is manually operated and equipped with a worktable 400 x 860 x 22 mm, adjustable, mounted on a frame. Application: Wood, duroplastics, gypsum, chipboard, and other similar materials. Specifications of the pivoting arm: Length 800 mm, max. outreach 580 mm, swivels 45° to the right/left, with display via radial scale. Specifications of the saw carriage: Manual feed (hand lever), tiltable 90° to the left, with display via radial scale, motor 380V at 2,700 rpm, degree of protection IP44.

Stanje: rabljeno, Leto izdelave: 2001, skupna dolžina: 2.680 mm, skupna širina: 1.200 mm, skupna višina: 2.200 mm, Colour: Grey Unladen weight: 950 kg Nsdpfxjwl I E Ee Anpslf Price: On request Spindle Moulder Hofmann TFS 1200 Serial number: 127-01204 Year of manufacture: 2001 7.8 kW, 16 A, 400 V 45° tilting adjustable. Aigner guide system Feeder - Year of manufacture: 2001 - Documentation available: No - CE certificate available: No - Serial number: 127-01204 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 2680 - Table width [mm]: 450 - Tilting spindle: Automatic - └ Min. tilt angle [°]: 0 - └ Max. tilt angle [°]: 45 - Feeder included: Yes - Brand: Masterwood - Type: Euromeo - Number of wheels [pcs]: 4 - Number of speeds: 2 - Guide included: Yes - Brand: Aigner - Min. spindle speed [rpm]: 3,000 - Spindle speed adjustment: Stepwise - Transport dimensions: 2680mm x 1200mm x 2200mm (L x W x H) - Transport weight [kg]: 950kg - Number of transport packages [pcs]: 1 Financial Information VAT: The stated price is net of VAT VAT/margin taxation: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. Njdjv Hm Nmepfx Anpelf (Inquiries will only be answered with your address and phone number!)