Ploščo strižne

WEINBRENNER TSV 6/3050

Stanje: dober (rabljeno), Leto izdelave: 1998, vrsta upravljanja: NC krmiljenje, število valjev: 4, premer spodnjega valja: 540 mm, premer zgornjega valja: 560 mm, premer stranskega valja: 420 mm, premer valja: 440 mm, dolžina valja: 3.100 mm, najv. debelina pločevine: 60 mm, skupna masa: 45.000 kg, skupna dolžina: 8.700 mm, skupna širina: 2.900 mm, skupna višina: 3.075 mm, moč: 81 kW (110,13 KM), Oprema: dokumentacija / priročnik, naprava za krivljenje stožcev, Najmanjši premer upogiba: 640 mm Stiskna sila proti zgornjemu valju: 5800 kN Stožčasta upogibna naprava Centralni sistem za mazanje Opremljen za menjavo valjev (sistem za hitro menjavo) 570 / 500 / 430 mm Dkjdpfx Apszbqqujwou Širina valja: 3100 mm Debelina pločevine pri 3 x zgornjem valju Ø: 50 mm Debelina pločevine pri 5 x zgornjem valju Ø: 60 mm Debelina pločevine pri upogibanju: 40 mm Premer zgornjega valja: 560 + 440 mm Premer spodnjega valja: 540 mm Premer stranskega valja: 420 mm Število valjev: 4 Hitrost upogibanja: 0-6 Nastavitev spodnjega valja: 0 - 200 mm/min Nastavitev stranskega valja: 0 - 500 mm/min Število pogonjenih valjev: 2 Moč: 81 kW Dolžina: 8700 mm Širina: 2900 mm Višina: 3075 mm Teža: 45000 kg Prosimo, upoštevajte: Informacije na tej strani smo zbrali po najboljših močeh in vesti, in kadar je bilo mogoče, od proizvajalca. Informacije so podane v dobri veri, vendar natančnost ni mogoče zagotoviti. S tem ne ustvarjamo nobenih obveznosti ali pogodb. Priporočamo vam, da preverite vse pomembne podrobnosti.

Stanje: novo, Load capacity 500 kg. Number of suction cups: 6 units Diameter of suction cups: 215 mm Suction capacity: 8.0 m³/h Crane eye diameter: 80.0 mm Voltage: 400 V Total power requirement: 0.18 kW Machine weight: approx. 120 kg Space requirements: approx. 2400 x 1100 x 584 mm Equipment: - For horizontal transport of smooth, dry, and airtight panels - Robust steel load-bearing frame - Painted in RAL 2000, featuring a low dead weight - Galvanized longitudinal beam, length 2,400 mm - 3x galvanized crossbeams, each 1,000 mm long - 6x spring-loaded, articulated, and adjustable suction cup holders - 6x suction pads Ø 215 mm - Low-maintenance, high-quality, dry-running rotary vane vacuum pump - With a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Telescopic operating handle, extendable up to 1,000 mm from beam center - Sturdy sheet metal holder for your crane control - "Suction / Release" operation via manual slide valve - Control and safety device for vacuum lifter * Robust control cabinet * Contactor control circuit for the vacuum pump * Safety warning system with acoustic sounder * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Two-step operation for load release - Fine dust filter for vacuum pump protection - Documentation Dkodpfx Apexak Ddswou * Special accessories included: - 6x ball valves for isolating individual suction cups * Enables handling of smaller formats without the need to move suction cups or crossbeams - Small spiral connection cable * Extension length up to 3,500 mm, designed as * Extension cable with CEE plug and coupling * Routed alongside the load chain to the lifting device

Stanje: kot nova (razstavni stroj), Leto izdelave: 2007, I - jeklo - ploska 50 x 10 mm I-jeklo - navpično 80 x 15 mm Kotno jeklo 50 mm Okrogel material 30,0 mm Premer cevi, maks. 1 1/2" mm Polni material - premer 30,0 mm Teža 185 kg Dimenzije D-Š-V 670 x 530 x 1350 mm Kvadratni material 40 x 40 x 3 mm Cevi 60 x 2,0 mm Debelina osi 30 mm Skupna potrebna moč 0,75 kW Predstavitveni model Oprema: Dkjdjt U R H Uopfx Apwju - stroj - podnožje - nožni stikalo - standardni valji (razdeljeni) - omogočeno horizontalno in vertikalno upogibanje - stroj ima samo en pogon (levo-desno gibanje)

Stanje: novo, Table length: 2400 mm Table width: 1200 mm Table height: 200 mm Material thickness: 25 mm Weight: 920 kg Manufacturer: GERD WOLFF Technical details: • Length: 2400 mm • Width: 1200 mm • Height: 200 mm • Weight: 920 kg • Bore diameter: 28 mm • Bore spacing: 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Improved corrosion resistance • Anti-adhesion protection against weld spatter • Maximum load capacity • Enhanced fatigue strength • Increased vibration resistance • Fine laser-engraved scale • Reinforcement by weld seams and ribs on the underside • Optimum working height of 820–865 mm • 6 height-adjustable support legs • Matching accessory set available (optional) Our welding tables are manufactured using HT 300 cast quality and are nitrided as a single unit after mechanical machining. In addition, they feature a precise fine scale engraved using laser technology. To ensure adequate stability, our welding tables are reinforced with weld seams and ribs on the underside (see images). Dedpfxeynbmms Apweku Furthermore, they undergo a 3-day gas nitriding process, which increases the tables’ corrosion resistance as well as their durability and vibration fatigue strength. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm; the maximum is 665 mm. This allows for a variable working height from 820 to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 The illustrations do not depict the original size and are for reference only. Our welding tables are manufactured by a renowned producer for our distribution brand "GERD WOLLF Maschinenfabrik." 3D welding table – 3D clamping systems – 3D precision welding table

Stanje: rabljeno, Pressure 160 t Passage width / mm Stroke / mm Working height 800 mm Total power requirement 15 kW Machine weight approx. 11.8 t - Table size: 1000x1000 mm - Distance between table and ram, large stroke at top, adjustment at top: 800 mm Additional information: Djdpfx Aoiulkqspwjku Extendable table

Stanje: dober (rabljeno), Leto izdelave: 1988, Upogibni stroj, abkant stroj, nihajni upogibni stroj, stiskalnica za upogibanje. - Predaja: v trenutnem stanju, kot je bilo ogledano, glejte slike - Delovanje: ročno upravljanje (brez avtomatskega načina) - Proizvajalec: RAFAMET nihajni upogibni stroj Tip KM-4 - Pogon: mehanski - Največja delovna širina: 2020 mm - Največja debelina pločevine: 4 mm Dkedpfev Tpxqjx Apwju - Globina odbojnika: 750 mm - Priključna moč: kW - Dimenzije: 3350/1540/H1510 mm - Teža: 3900 kg

Leto izdelave: 2025, stanje: novo, Standard configuration with column Dedpegn Tzlsfx Apwsku Motorized height adjustment 700 mm Articulated arm length 2x 1,100 mm Height adjustment of grinding spindle 130 mm Grinding motor 5.5 kW Including the following options: + Speed control, spindle speed approx. 250 – 1,000 rpm + Pneumatic grinding pressure support + Bellows cover for column and trapezoidal spindle + Incl. foundation bolts and installation template Grinding tools available as options Request more information

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Container Rotator with 10 Ton Load Capacity - Infinitely variable speed control - Hand and foot remote control - Suitable for diameters from 320 mm to 2,800 mm - Roller diameter: 300 mm Dedpfxjd Nmx Tj Apweku - Speed: 6 - 60 m/h - Power: 2 x 0.55 kW

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), Na voljo je stružnica (Universal Turning Solution), krmiljenje: Fanuc, revolverska glava: 12-pozicijska, konjiček, 3-čeljustna glava. Orodni nastavitveni ročaj: Renishaw HPRA. Ogled je možen po dogovoru. Dkedpfjx I Rpxjx Apwju

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: Djdpfxjuiy Ngo Apwoku - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training